Silicone

Silicone

AB Specialty Offers New Line of Silicone Ingredients for Personal Care Applications

The New Line of Silicone Ingredients is used as an alternative to dimethiconol gum blends. These ingredients are resistant to water and are suitable for use in skin care, color cosmetics, sun care and hair care applications. The product when used in skin care applications offers long wear of actives on skin, wash off resistance and file forming and in hair care applications they provides...

Read More »
Silicone

Wego Offers and Innovative Polydimethylsiloxane

Wego Chemical Group is a leading global supplier and distributor of Silicones such as Polydimethylsiloxane in varying viscosity degrees. It is found under CAS # 63148-62-9 and EINECS # 203-492-7 and referred to as E900, its code for European food additives. These Silicone Fluids have the molecular formula of (C2H6OSi)n. It can also be referred to as PMDS, Dimethyl Fluid, Methylpolysiloxane, and...

Read More »
Addition Cured Silicone is Optically Clear with Enhanced Low Temperature Serviceability
Silicone

Addition Cured Silicone is Optically Clear with Enhanced Low Temperature Serviceability

Ideal for potting and encapsulation applications, MasterSil 157 is a two component silicone system that features low viscosity and low exotherm. It has superior electrical insulation properties and can cure in sections beyond 1 inch thick. MasterSil 157 is serviceable over the wide temperature range of -175°F to +500°F [-115°C to +260°C]. “This product was formulated for applications that...

Read More »
Encapsulants

Silicone Potting Compound features lightweight formulation.

Utilizing advanced micro balloon technology fillers, 20-1634 Light Weight Silicone Potting Compound features specific gravity of 0.82, making it suited for applications that require low weight, flexibility, high heat resistance, and optimized electrical insulation properties. Two-component silicon elastomer features Shore A hardness of 34 and tensile strength of 125 psi. Formulated without...

Read More »
Low-Viscosity Gap Filling Material has high thermal conductivity.
Silicone

Low-Viscosity Gap Filling Material has high thermal conductivity.

Viscosity ofÂ- GAP FILLER 1400SL allows this 2-part, silicone-based, liquid gap filling material to flow in and around tight, uniquely shaped structures to fill small voids and provide thermal transfer to 1.4 W/m-K. When cured, soft material allows absorption of CTE stresses and provides mechanical shock dampening for fragile assemblies. Product cures at room temperature...

Read More »
Silicone Pressurized Tubes let users control bead width.
Silicone

Silicone Pressurized Tubes let users control bead width.

Designed for sealing, bonding, protecting, and waterproofing, RTV Silicone Pressurized Tubes with Select-A-Bead™ Nozzle have double piston pressurized package that allows for smooth, uniform dispensing and self-sealing plug that keeps silicone fresh. Product cures at room temperature so no special curing method is required. Available in 5 colors, chemically stable formulation shows little...

Read More »
Silicone

Rapid Prototyping Silicone enhances moldmaking process.

Formulated with low viscosity to optimize filling and degassing, BLUESIL™ RTV 3044 has 1:1 mix ratio and built-in inhibition resistance and promotes mechanical performance and mold life. Platinum-catalyzed elastomer cures at room temperature, exhibits high degree of transparency, and allows for mistake-free part reproduction and accelerated, efficient process.

Read More »
Low Stress, Optically Clear, One Part Silicone Meets NASA Low Outgassing Specifications
Silicone

Low Stress, Optically Clear, One Part Silicone Meets NASA Low Outgassing Specifications

Passing ASTM E595 testing for NASA low outgassing, Master Bond MasterSil 920-LO is a high performance, room temperature vulcanizing silicone for sealing, coating and small encapsulations. This single component system has a moderate, flowable viscosity and a solid electrical profile, which makes it well suited for conformal coating applications in the electronic and optical industries. Featuring a...

Read More »
Miscellaneous Compounds

Electrically Conductive Silicone targets printed electronics.

Designed with less than .003 Ω/cm resistance, EXP-06335 is printable via screen, flexo, or slot die. Heat cure, one part material is packaged in any size container and has stable shelf life of 6 months at room temperature. Flexible and electrically conductive, product adheres to most common circuit board materials, PU, silicone, and metal substrates. It does not require use of primers, buffers,...

Read More »
Cosmetics

Fitz Chem and Shin-Etsu Silicones of America Announce Distribution in Central US for Shin-Etsu Personal Care Products

Fitz Chem and Shin-Etsu Silicones of America are excited to announce a distribution agreement for the Shin-Etsu silicone product line for personal care in the Central US.Â-  Fitz Chem was appointed a Shin-Etsu Silicones of America distributor for personal care due to excellent sales and customer support, combined with years of personal care application expertise.  Shin-Etsu produces...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics