Signal Generators

New Signal Generators Deliver up to +34 dBm Output Power
Signal Generators

New Signal Generators Deliver up to +34 dBm Output Power

Rohde’s SMB100B (Analog RF) and SMBV100B (vector) signal generators are available in different configurations with frequency ranges of 8 kHz to 1 GHz, 3 GHz and 6 GHz. SMBV100B offers improved baseband section with up to 500 MHz bandwidth and features 5G, cellular IoT, LTE, WLAN IEEE 802.11a/b/g/n/ac/ax and Bluetooth 5.0 connectivity. SMB100B is suitable for radar, receiver and CW-based tests...

Read More »
Saelig's New Nucleonics 765 Pulse Generator Offers 5V Pulses with Less Than 70ps Rising or Falling Time
Signal Generators

Saelig's New Nucleonics 765 Pulse Generator Offers 5V Pulses with Less Than 70ps Rising or Falling Time

Saelig’s Nucleonics 765 Rise Time Pulse Generator is available in 2 or 4 channel versions and provides repetition rate of 240 MHz with 25ps period jitter specification. Unit is suitable for experimental colliders, laser modulation, mass spectroscopy, TDT and TDR applications. Nucleonics 765 comes with HDMI or USB interfaces, 7 in. 1024 x 600 capacitive touch LCD and built-in instrument controls...

Read More »
R&S SMW200A Vector Signal Generator comes with optional signal path.
Signal Generators

R&S SMW200A Vector Signal Generator comes with optional signal path.

R&S SMW200A Vector Signal Generator support classical pulsed signals and I/Q modulated signals. Unit is used to generate high pulse rates up to 1 Mpulse/s and can test radar receivers at high pulse rates. Product is equipped with the R&S SMW-K503 realtime control interface software option. R&S SMW200A features two independent paths which are used for testing DUTs with several channels or...

Read More »
Pulse/Arbitrary Waveform Generators feature deliver sample rate of 2.4GSa/s.
Signal Generators

Pulse/Arbitrary Waveform Generators feature deliver sample rate of 2.4GSa/s.

SDG6000X Series Dual-Channel Pulse/Arbitrary Waveform Generators are available 200/350/500MHz versions. Featuring 4.3 in. TFT touch screen display, unit’s pulse width can be tuned to minimum of 3.3 ns with 100 ps step adjustment. Capable to produce noise, IQ signals, and PRBS patterns with a 20 Vpp maximum amplitude, units come with USB Host, USB Device, LAN interfaces and deliver 16-bit...

Read More »
Platinum Tools® Announces New Professional High-Powered Tone Generator & Tone Probe
Signal Generators

Platinum Tools® Announces New Professional High-Powered Tone Generator & Tone Probe

Now Available, the ToneMaster™ & ToneSeeker™ Make Easy Work of Tracing & Locating Cables and Cable Ends NEWBURY PARK, Calif., Oct. 3, 2017 - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the new ToneMaster™ High Powered Tone Generator (p/n TG210C /...

Read More »
Saelig's Comb Generators come in 3 and 3.5 oz.
Signal Generators

Saelig's Comb Generators come in 3 and 3.5 oz.

Available in TBCG1 and TBCG2 models, TekBox TBCGx Comb Generators are used for testing radiated noise measurements. TBCG1 generator comes in 3.2 x 2.4 x 1.1 in. size and powered by 9V alkaline cell. With built-in dipole antenna, TBCG1 is used to emit vertically or horizontally-polarized signals and consumes current of 175mA. TBCG2 generator comes with N female input connector and N male output...

Read More »
PXIe Microwave Signal Generator comes with external IQ inputs.
Signal Generators

PXIe Microwave Signal Generator comes with external IQ inputs.

Offering frequency coverage up to 44 GHz and modulation bandwidth up to 1 GHz, M9383A PXIe Microwave Signal Generator is used to generate complex waveforms. Supporting modulation bandwidths up to 2 GHz, unit is embedded with SystemVue software for creating 5G candidate waveforms, such as 8 x 100 MHz OFDM component carriers. Delivering 1 percent EVM for 800 MHz wide pre-5G waveforms, product is...

Read More »
Signal Generators

Keysight Technologies to Present a Vision for 5G Evolution at WAMICON 2017

What: Keysight experts will be at WAMICON 2017, an annual IEEE Wireless and Microwave Conference, to discuss everything from circuit-level modeling to system verification for general RF, microwave, millimeter wave for 4G, emerging 5G communications, and aerospace & defense. Keysight also will be demonstrating the latest ADS 2016, EMPro and SystemVue software, as well as a range of RF and...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers