Signal Couplers

Directional Coupler covers 0.5-8.0 GHz frequency range.
Signal Couplers

Directional Coupler covers 0.5-8.0 GHz frequency range.

Featuring stripline design, Model 158006 covers frequency range of 0.5–8.0 GHz with 6 dB (±1.1 dB) of nominal coupling, frequency sensitivity of ±0.6 dB, and directivity greater than 15 dB. Coupler exhibits insertion loss ofÂ- less than 1.70 dB across full frequency range including coupled power. Maximum VSWR at any port is 1.70 GHz. Measuring 5.25 x 0.53 x 0.72 in.,...

Read More »
Signal Couplers

Communication Photocouplers operate from 1 mA input current.

Model TLP2301 photocouplers support 20 kbps transmission rate, guarantee maximum delay time of 30 Â-µs, and operate at input current of 1 mA with IR luminescence LED. Supporting 100 kbps transmission rate, TLP2303 models include light-receiving chip with high-speed photo Darlington transistor, allowing for current transfer ratio of up to 800% at 1.6 mA input current. Units convert RS-232...

Read More »
Signal Couplers

Medium Voltage Inductive Coupler Kit offers low insertion loss.

Kit includesÂ- 2 units of medium voltage non-intrusive inductive coupler for smart grids (Prime and G3 PLC); MICU 300A-S/LF Series transmits PLC signals between power line and PLC data transceiver without connection of communication cable to power line. While >5 kV insulation promotes safe installation, nanocrystalline materials avoid saturation problems at elevated currents....

Read More »
Thin-Film Directional Couplers serve wireless applications.
Signal Couplers

Thin-Film Directional Couplers serve wireless applications.

Suited for portable communications devices, DB0603N thin-film, 3 dB, 90° couplers come in surface-mountable, 0603 size LGA package; have 800–6,000 MHz range; and provide 10 W continuous power handling. Package contributes to minimal profile and parasitics characteristics and also lends to optimal solderability and heat dissipation as well as self-alignment during reflow. RoHS compliant...

Read More »
High-Power, Bidirectional Couplers feature SMT design.
Signal Couplers

High-Power, Bidirectional Couplers feature SMT design.

With range of 610–810 MHz, SYBD-22-82HP+ 50 Ω, 22 dB coupling, DC pass units feature mainline loss of 0.10 dB typ with VSWR of 1.10:1 typ and deliver directivity at 24 typ. Select models feature power handling capabilities to 150 W at room temperature, and suitable applications include VHF/UHF and SMR. Model SYBD coupler series joins LTCC coupler family with rugged connectorized...

Read More »
Quadrature Couplers come in flexible and non-flexible versions.
Signal Couplers

Quadrature Couplers come in flexible and non-flexible versions.

WIRELINE® (flexible) and WIREPAC® (non-flexible) quadrature couplers consist ofÂ- one pair of wire center conductors surrounded by continuous dielectric insulator and shielded by drawn or extruded outer jacket. Construction combines physical attributes of semi-rigid coaxial cable and electrical performance of precision TEM mode parallel coupled line...

Read More »
High-Power Bi-Directional Coupler features rugged construction.
Signal Couplers

High-Power Bi-Directional Coupler features rugged construction.

Featuring low loss suspended substrate construction, ZGBDC10-362HP+ coaxial coupler can pass up to 3 A of DC current from input to output and handle up to 250 W CW. IP67-rated, weatherproof case and sealed construction accommodates requirements of field applications or remote monitoring sites. With 0.18 dB insertion loss and 300–3,000 MHz coverage, coupler is also suited for lab testing as well...

Read More »
Signal Couplers

Optical Couplers, Transceivers meet telecom/datacom requirements.

Intended for telecom, datacom, and military applications, multi-mode and single-mode optical tap, splitter, and star couplers feature simplistic connector terminations and come in ruggedized housings that isolate fused fiber area. Miniature 2 x 12 channel (TX=RX) single on-board transceiver system supports next generation Infiniband and Ethernet standards as well as other emerging intra box...

Read More »
Signal Couplers

Fiber Coupler/Splitters feature fused biconical tapered process.

Built on fused biconical tapered (FBT) process and proprietary packaging platforms, 1X3 polarization maintaining (PM) truly-fused fiber coupler/splitters offer high extinction ratio with polarization launch into single- or dual-axis (slow axis and fast axis). Tests have shown PER of greater than 18 dB and uniform split ratios. Harsh-environment resistant productsÂ- are suited for use in...

Read More »
Directional Couplers offer 20 dB nominal coupling.
Signal Couplers

Directional Couplers offer 20 dB nominal coupling.

Targeting broadband electronic warfare systems and commercial wireless systems, Models 101040020 and 101040020K offer 20 dB nominal coupling over ultra-broadband frequency range of 1.0–40.0 GHz. Multi-purpose stripline designs exhibit insertion loss of less than 0.85 dB from 1.0–20.0 GHz and less than 1.5 dB from 20.0–40.0 GHz. Measuring 2.00 x 0.40 x 0.65 in., Model 101040020 comes with...

Read More »

All Topics