Signal Conditioners

Dual-Mode Amplifier works with various vibration sensors.
Signal Conditioners

Dual-Mode Amplifier works with various vibration sensors.

Multi-function 443B01 signal conditioner offers menu-driven display with keypad or RS-232 serial communication. Logical operation adjusts input sensor sensitivity, gain, and charge conversion with 4-digit accuracy. Additional offerings include selectable low and high pass filtering, sensor fault detection, and sensor and amplifier overload detection. With modular architecture, product is suited...

Read More »
LVDT Signal Conditioner operates from 24 Vdc.
Signal Conditioners

LVDT Signal Conditioner operates from 24 Vdc.

Suited for factory locations where space and power sources are limited, single-channel, DC-operated model LVC-2402 operates from 24 Vdc. Unit offers three user-selectable analog outputs: 0 to ±10 Vdc, 0 to 10 Vdc, or 4 to 20 mA current output in 3- or 4-wire current loop configuration. Input power is fully isolated from analog outputs, and LVDT excitation frequency is available as 3, 5, or...

Read More »
Signal Conditioner features TouchCAL(TM) technology.
Signal Conditioners

Signal Conditioner features TouchCAL(TM) technology.

Action Pak® Model AP4003-0001 socket-mount, isolating signal conditioner is field configurable for any 3-wire potentiometer input from 100 W to 100 kW, and provides selectable DC outputs of 0-10 V, 0-5 V, 0-20 mA, and 4-20 mA. Configuration via DIP switches enables maximum setpoint resolution. TouchCAL(TM) technology uses microprocessor to enable up to 80% adjustment of zero and span and...

Read More »
Signal Conditioning Module adds TEDS support.
Signal Conditioners

Signal Conditioning Module adds TEDS support.

Model WBK18(TM) offers 8 channels of dynamic signal input for WaveBook(TM) systems. It provides all signal conditioning and biasing required to accept accelerometers, sensors, microphones, or other dynamic input source. All channels are sampled simultaneously to insure phase matching between channels. Up to 8 units can be attached to one WaveBook for total ICP® sensor capacity of 64...

Read More »
Strain Gage Conditioner Module features 1500 Vac isolation.
Signal Conditioners

Strain Gage Conditioner Module features 1500 Vac isolation.

Model 5D70 single input, dual-output, software-programmable conditioner provides input of pressure, force, torque, weight, and other variables. Self-contained in hard aluminum case, it can be used as in-line signal conditioner or reside in host device. Configurable sensitivity ranges from 0.5-16.0 mV/V, full-scale. Unit includes remotely sensed, user-selectable excitation; chopper-stabilized,...

Read More »
Strain-Gage Signal Conditioner suits low-level signals.
Signal Conditioners

Strain-Gage Signal Conditioner suits low-level signals.

Model 163MK accommodates Â-¼, ½, and full wheatstone bridge strain gage applications and includes 2 built-in precision ½ bridge completion resistors. Product offers high-gain differential amplifier, 2-pole Butterworth filter, and built-in excitation supply capable of providing up to 120 mA. Gain can be set up to 5,000, amplifier output is ±10 V, and output filter cutoff...

Read More »
Charge Converters condition piezoelectric sensor signals.
Signal Conditioners

Charge Converters condition piezoelectric sensor signals.

Models 422E35 and 422E36 convert charge-mode signals into low-impedance voltage signals for input to readout, recording, and analysis instruments. In-line units, for use with high-temperature piezoelectric acceleration, pressure, and force sensors, accept source resistances as low as 10 k ohm and temperatures above 400°F. Converters are suitable for harsh environments, such as vibration...

Read More »
Signal Conditioner measures bridge signals.
Signal Conditioners

Signal Conditioner measures bridge signals.

WAVEANALOG Pro Bridge eliminates need for PLC or DCS module by providing bridge excitation voltage and converting millivolt bridge output to standard voltage or current signal, which can be used by control system. With DIP-switch selectable bridge excitation voltages, signal conditioner allows uni- or bi-polar voltage inputs from 0-10 mV to -500/+500 mV, and provides choice of outputs of 0-5 V,...

Read More »
Signal Conditioner provides configurable input/output modes.
Signal Conditioners

Signal Conditioner provides configurable input/output modes.

Universal Signal Conditioner is DIN rail mountable and features galvanic isolation for re-transmission and measurement of isolated analog output signals. It provides 3 measurement samples per second for all input types. Unit also provides 60 V of continuous protection for all inputs and protects outputs and power supplies against over-voltages to 400 W/ms. Three-point insulation is provided up to...

Read More »
Signal Conditioners work with TEDS sensors.
Signal Conditioners

Signal Conditioners work with TEDS sensors.

Multichannel Series 481 prepares measurement signals from piezoelectric sensors for input to recording or analysis instrumentation. Versions are available with read and write capabilities for TEDS (Transducer Electronic Data Sheet) IEEE P1451.4 compliant charge mode and ICP® sensors. Options include RS-232 and RS-485 serial interfaces for daisy-chaining multiple units, and incremental gain...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers