Signal Conditioners

Strain Gage Signal Conditioners are rated NEMA 4X.
Signal Conditioners

Strain Gage Signal Conditioners are rated NEMA 4X.

Series 8162 provides conditioned, amplified analog voltage and current output for strain gage based sensors such as load cells and reaction torque sensors. Operating from 12-28 Vdc power, signal conditioners deliver ±5 or ±10 Vdc and 4-20 mA output signals for recording, control, and analysis purposes. Products, with 0.45-11 mV/V output, are housed in fire-resistant, waterproof...

Read More »
Capacitive Sensor Signal Conditioners come in varied styles.
Signal Conditioners

Capacitive Sensor Signal Conditioners come in varied styles.

Capacitive accelerometer signal conditioners provide excitation power for capacitive accelerometers and prepare their measurement signals for readout, recording, and data acquisition. Platforms are offered in portable, benchtop, modular, and rack-mount styles, all of which include per-channel null adjustment for zeroing DC offset voltage. Battery and optional dc-powered units are suited for...

Read More »
Power Conditioner protects inductive loads.
Signal Conditioners

Power Conditioner protects inductive loads.

SOLATRON(TM) Plus 3-Phase Power Conditioner protects against common power problems by providing true voltage regulation, surge protection, and noise isolation. Within input voltage range of -25 to +15%, unit produces output voltage of less than ±5% of nominal voltage regulation to maintain stable power for critical processes. Common voltage configurations include 20, 30, 50, and 75 KVA in...

Read More »
Digital Signal Conditioner measures only 5.5 x 2.75 x 1.2 in.
Signal Conditioners

Digital Signal Conditioner measures only 5.5 x 2.75 x 1.2 in.

Model 4325 Super-Smart Digital Signal Conditioner connects directly to strain-gauge transducer and generates ±10 V analog output along with serial digital output. It compensates for transducer nonlinearities using integrated, 6-point calibration capability, while multi-drop RS232 serial port and command set allow for connection to multiple units in serial network configuration. Unit...

Read More »
Signal Conditioners

Signal Conditioner converts transducers into smart cells.

Integrated into strain gage transducer, CellMite 100 Embedded Digital Signal Conditioner Unit generates ±10 V analog output along with serial digital output. Unit compensates for transducer nonlinearities with integrated, 6-point calibration capability. Multi-drop RS232 serial port, unit addressing capabilities, and command set allow for connection of multiple units in serial network...

Read More »
Signal Conditioners and Electronics support TEDS Sensors.
Signal Conditioners

Signal Conditioners and Electronics support TEDS Sensors.

Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICP® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows...

Read More »
Digital Load Conditioner suits strain-gauge sensors.
Signal Conditioners

Digital Load Conditioner suits strain-gauge sensors.

Dedicated to load measuring applications using load cells or transducers, MVD 100 board can supply one full-bridge sensor and offers 3 adjustable set points. It provides 1-3 V, 0-10 V, or 4-20 mA analog output plus RS-232 serial output. Setup and calibration of conditioner is performed via 3 pushbuttons inside unit, and all configuration values can be recalled on internal LCD display. IP65...

Read More »
Signal Conditioner is powered via computer USB port.
Signal Conditioners

Signal Conditioner is powered via computer USB port.

Model 485B36 pocket-sized, dual-channel ICP® sensor signal conditioner offers low-noise performance found in battery-powered signal conditioners. In addition to providing sensor with required constant current supply, unit decouples sensor's bias voltage from measurement signals. Features include BNC jack input connectors, 19.5 Vdc @ 4.5 mA sensor excitation power, and 50 kHz upper frequency...

Read More »
Signal Conditioners are DC powered.
Signal Conditioners

Signal Conditioners are DC powered.

Series 485M signal conditioners provide constant current excitation for ICP® sensors from 18-30 Vdc battery or lab power supply. Unit includes options for connecting directly to readout devices and data acquisition systems. Variety of power connections allows for flexibility in connecting directly into various power supplies. Compact signal conditioners feature x1 gain circuitry and are...

Read More »
Signal Conditioner suits strain gage based systems.
Signal Conditioners

Signal Conditioner suits strain gage based systems.

Series 6202 provides precise excitation, amplification, and filtering for strain gage based measurement or control system. Housed in 1 x 2 in. case attached to mounting flange, unit provides fixed +10 Vdc excitation voltage with up to 30 mA of current making it capable of driving variety of load cell/strain gages. Gain values range from 2-2,965, and amplifier output is rated at -3 to +15 Vdc....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers