Signal Conditioners

Signal Conditioners

Power Conditioners come in models ranging from 120-3,000 VA.

ONEAC® PCm Series eliminates power contaminants and limits peak voltage and edge-speed of electrical transients by employing low impedance isolation transformer and Virtual Kelvin Ground® to remove full spectrum of power line noise in Common and Normal modes. Conforming to IEC60601-1 standards, medical grade power conditioners come with hospital-grade plugs and receptacles and in 120...

Read More »
Signal Conditioners

Analog Front End targets portable ultrasound systems.

Featuring 102 mW/channel at 1.25 nV/rtHz at 40 MSPS, 8-channel AFE5804 contains low-noise amplifier, voltage controlled attenuator, programmable gain amplifier, low-pass filter, and 12-bit 10-50 MSPS analog-to-digital converter with LVDS data outputs. LNA is set for 20 dB gain and includes 280 mVpp input range, while gain of VCA can be varied over 46 dB range with 0-1.2 V control voltage common...

Read More »
IEPE Signal Conditioning Board features 4 channels.
Signal Conditioners

IEPE Signal Conditioning Board features 4 channels.

Intended for OEM applications, Model 4007 4-channel IEPE signal conditioning board features 2 outputs labeled AC and DC for each channel. Each channel is equipped with variable low pass filter of 3 and 10 kHz, and channel 1 features logical output for fault detection. Requiring 20-36 Vdc, unit needs only one constant voltage supply for all 4 channels. With PCB-based physical configuration, it...

Read More »
New Configurable Universal Signal Conditioners for Process Applications - Weidmuller's MANN SERIES
Signal Conditioners

New Configurable Universal Signal Conditioners for Process Applications - Weidmuller's MANN SERIES

RICHMOND, VA (June 9, 2008) - Weidmuller announces the introduction of a new family of innovative products for processing analog signals - the MANN SERIES. This new series ranges from simple dedicated units to complex microprocessor-controlled devices that can be used with almost all signal types and measurement sensors. The MANN SERIES products also offer a variety of integrated functions...

Read More »
Signal Conditioner features 3-way signal isolation.
Signal Conditioners

Signal Conditioner features 3-way signal isolation.

Available as linear or square root extraction type, Model DR900 is customizable universal signal conditioning module that has over 100 input and output analog conversion combinations. It is factory precalibrated for all input and output ranges, and factory or custom field scaling is available by mode switch change. Suited for chemical, petrochemical, and water industries, CE compliant,...

Read More »
Encapsulated Signal Conditioner suits rugged environments.
Signal Conditioners

Encapsulated Signal Conditioner suits rugged environments.

Suited for load cells and transducers utilizing full bridge strain gage configuration, Model 433 contains precision instrumentation amplifier with isolated, filtered output and regulated, adjustable output bridge excitation source. Self-contained, AC-powered unit provides isolated 4-20 or 0-20 mA output capable of driving 1,000 ohm loop. Gain amplifier can accept FS live load signals as low as 5...

Read More »
Signal Conditioners aid in automotive component testing.
Signal Conditioners

Signal Conditioners aid in automotive component testing.

Offered with selectable filters or isolated grounds, rack-mount models suit applications where case ground piezoelectric sensors are used and could cause ground-loop noise. Model 483C30 offers 8 channels with true galvanic isolation of each input to output, x0.1-x200 incremental gain, 4-order 10 kHz low pass filter, and Ethernet interface. Model 481A03 has 16 channels of ICP® inputs with...

Read More »
Signal Conditioning Board eliminates ground loops.
Signal Conditioners

Signal Conditioning Board eliminates ground loops.

With Model MSXB 084, users can implement signal conditioning in data acquisition systems. Board acquires data at 333 ksamples/sec and includes 16 differential analog inputs, with isolation from PC ground. Analog-to-digital conversion to 16-bit resolution takes place on board itself, minimizing exposure to noise from other circuits in system. Board can fit into backplane in standard industrial...

Read More »
Signal Conditioners

Signal Conditioners are DIN rail mount configurable.

Mountable and compatible with 35 mm DIN rails, DRF Series of signal conditioners provide up to 3,500 Veff isolation between input, output, and power. They accept broad range of input signals such as ac and dc voltage and current, frequency, temperature (thermocouple and RTD), and process transducers. Each model is available with standard process outputs of either 4-20 mA or 0-10 Vdc. CE compliant...

Read More »
Signal Conditioner is designed for process monitoring.
Signal Conditioners

Signal Conditioner is designed for process monitoring.

Capable of capturing short duration force signals, Model 410B01 ICP® force sensor signal conditioner can monitor forces experienced during manufacturing, assembly, on-line processes, quality assurance, and end-of-line product testing. Unit captures and holds peak force reading until PLC is able to scan for value. Comprised of DIN rail mounted module, unit offers analog output of 0-10 V, and...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers