Signal Conditioners

Vibration Amplifier has programmable outputs and sensitivity.
Signal Conditioners

Vibration Amplifier has programmable outputs and sensitivity.

Designed for conditioning and display of rotating machinery data, microprocessor-based Endevco® model 6634C offers simultaneous outputs as broadband, acceleration, velocity, and displacement. It accepts inputs from single-ended, differential piezoelectric or ISOTRON® (IEPE-type) accelerometer, velocity coil, or remote charge converter. Front panel keyboard or optional RS-232 interface...

Read More »
Signal Conditioners tolerate temperatures to 500°C.
Signal Conditioners

Signal Conditioners tolerate temperatures to 500°C.

Providing output frequency of 100 Hz at 0°C to 5,100 Hz at 500°C, with 12 bit resolution, Model 8511 and 8512 thermocouple to frequency signal conditioners are used with Type J and Type K thermocouples, respectively. They operate on common 24 V, 7 mA PLC high-speed counter input and utilize linearization and cold junction compensation. Suited for remote temperature monitoring...

Read More »
Signal Conditioner provides current or voltage output.
Signal Conditioners

Signal Conditioner provides current or voltage output.

Engineered for industrial sensors, UL listed JUMPFLEX 857-819 accepts bipolar inputs from -100 to +1,000 mV and converts to current output of 4-20, 0-20, 0-10, or 2-10 mA or voltage output of 0-10, 2-10, 0-5, or 1-5 V. CAGE CLAMP®S spring pressure connection technology provides vibration-proof and maintenance-free terminations and ensures that they are temperature cycling resistant at -25...

Read More »
DIN Rail Amplifier is suited for DC strain gage transducers.
Signal Conditioners

DIN Rail Amplifier is suited for DC strain gage transducers.

AP5103 DIN-rail amplifier allows to select filtered analog output of ±5 Vdc, ±10 Vdc, or 4-20 mA, and is designed for input of pressure, force, torque, weight, and other variables measured by standard DC-excited strain gage transducers. It can accommodate variety of DC strain gage sensors with bridge resistance of 120 to 10 K W. User friendly unit comes with front panel accessible...

Read More »
Line Conditioners comply with MIL and avionics input bus.
Signal Conditioners

Line Conditioners comply with MIL and avionics input bus.

Offering 3 forms of protection and 50 W power range, Model PGDS-50 extends and monitors input voltage bus to provide continuous system protection against cranking, drop-outs, transients, and spikes for compliance with MIL-STD-1275A/B/C, MIL-STD-704A/D/E/F, EN2282, and D0160D/E/F. Model LGDS-300, with 300 W power range, offers identical compliance but with 2 forms of protection. Both are supplied...

Read More »
Redundant Backplane suits FOUNDATION Fieldbus H1 Segments.
Signal Conditioners

Redundant Backplane suits FOUNDATION Fieldbus H1 Segments.

Diagnostic Power Conditioner (DPC) system has been expanded with Single Segment Redundant Backplane, which can combine 2 isolated power supply modules into one FOUNDATION(TM) fieldbus segment. Backplane integrates diagnostic unit used to monitor redundancy of external bulk power supply along with H1 power supply. Measuring 210 x 42 x 113 mm, backplane footprint is designed for DIN rail mounting,...

Read More »
Universal Modules feature detachable front programming unit.
Signal Conditioners

Universal Modules feature detachable front programming unit.

Featuring universal power supply of 21.6-253 Vac and 19.2-300 Vdc, PReasy 4100 Series can be configured for all types of industrial measuring signals such as RTD, TC, Ohm, Potentiometer, mA, and V. Depending on desired output function, user can choose between Model 4114 with analog output, Model 4131 with 2 relays, or Model 4116 with analog output and 2 relays. Display front, Model 4501, can be...

Read More »
Universal Signal Conditioners feature slim-line housings.
Signal Conditioners

Universal Signal Conditioners feature slim-line housings.

Models 84116 and 884114 convert, isolate, and transmit scale signals from various process sensor and controller I/O. Both DIN-rail-mountable models incorporate mA and Vdc outputs while 84116 adds 2 individually programmable relays for alarming/control functions. Scalable input signals supported include Vdc, thermocouple with internal cold junction compensation, 2-4 wire RTDs, linear resistance,...

Read More »
Analog Signal Conditioner is programmable to 130+ I/O signal combinations.
Signal Conditioners

Analog Signal Conditioner is programmable to 130+ I/O signal combinations.

Enclosed in DIN rail mountable housing with pluggable terminal blocks, Model CA-PI/PO reduces need to stock variety of signal converters. User can select from 19 different input signal ranges and 7 different output ranges by programming series of DIP switches. Providing 3 kV of isolation and offering user adjustable zero and span, Universal Programmable device monitors transmitter line status and...

Read More »
Signal Conditioners

Crosspoint Switch enables migration to 11 Gbps interconnects.

Featuring FlexEQ(TM) signal equalization capabilities, Model VSC3316 is available with 16 lanes, each able to operate independently from DC to 11.5 Gbps. Asynchronous device incorporates non-blocking and multicasting switch core, and provides protocol-transparent operation. It includes detection/transmission of signal, providing native out-of-band support of SAS/SATA storage protocols. Housed in...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics