Shearing Machinery

Joy Mining Machinery Delivers Its Most Powerful Shearer

WARRENDALE, PA October 2007-Joy Mining Machinery's largest and most powerful longwall shearer machine is scheduled to go into production at the world's largest coal mining complex, Shenhua Energy Co., Ltd.'s Shendong Coal Branch operation. Joy said the 7LS7 shearer meets the demands of ever-increasing mining heights and longwall face widths worldwide; seams exceeding 6 metres (20 feet) and faces...

Read More »
Shear and Utility Snip can cut through sheet metal.
Hand Shears

Shear and Utility Snip can cut through sheet metal.

KNIFTI-CUT(TM) Shop/Electrician Shear and Utility Snip features needle-nose blades with 2 in. cut length that provide access to confined areas. It features textured plastisol grips and hot drop-forged blades manufactured of high carbon steel. Able to shear various materials, snip wire and cable ties, and strip coated/insulated wire, compact, multipurpose tool can cut through 26 ga cold-rolled...

Read More »
Tools

Cordless Offset Shear eliminates production of waste ribbon.

Suited for cutting up to 20 ga spiral duct and uneven, non-flat sheet metal, DC495KA is powered via XRP(TM) extended run-time 18 V battery and features head that rotates 360° for access in tight areas. Design separates material without creating waste ribbon and lets users turn tool to make radius cuts as small as 1 in. dia. Speed can be varied from 0-2,300 SPM, and ergonomic design features...

Read More »
Tools

NTE Electronics Becomes Master Distributor of PLATO® Soldering Tools!

Bloomfield, NJ --- NTE Electronics, Inc. has become a master distributor of the Plato® line of high quality soldering tools. Plato is one of the largest manufacturers of soldering tips worldwide, producing replacement tips to fit all of the most popular soldering stations including Hakko®, Weller®, Pace®, Hexagon®, Ersa®, Edsyn® and many more....

Read More »
Cutting Tools cut carbon fiber strip, rod, and tube.
Shearing Machinery

Cutting Tools cut carbon fiber strip, rod, and tube.

Featuring one serrated edge, Scissor Model 9180 cuts strips between .019-.034 in. thick, while full by-pass Shear Model 2193 cuts rod from .20-80 in. diameter and .060 in. ID tube. Tools create square cut on strip and rod, but it is recommended users insert wire into tube before cutting to prevent thin walls from crushing. Both tools include cushioned Xuro-Rubber(TM) grips, return springs, and...

Read More »
Portable Shear and Rod Cutter can be vice or bench mounted.
Shearing Machinery

Portable Shear and Rod Cutter can be vice or bench mounted.

Weighing 17 lb, No. 1 Portable Shear has offset frame constructed to permit shearing of wide sheets, straight cuts, or outside curves. Blades are made of tool steel and can be removed for sharpening. With 1/8 in. mild steel shear capacity and 5/16 in. mild steel rod-cutting capacity, product features 24 in. handle mechanism that works in compound fashion to facilitate cutting. Special latch is...

Read More »
Shear cuts high strength fibers.
Hand Shears

Shear cuts high strength fibers.

Made from precision ground and heat treated carbon steel, Xuron Model 9180 Shear features serrated gripping edge that holds super-strong aramid fibers in place and another highly sharpened cutting edge that assures clean, even, and uniform cut. Ergonomic shear includes cushioned rubber hand grips and gentle return spring and has no finger loops. It is designed for cutting Kevlar® fiber and...

Read More »
Shears

Shear features 6.8 A motor for straight cutting.

Equipped with 0-2,500 spm motor, 18 Gauge Model 6852-20 features 360° swivel head that allows for optimal positioning, no matter what angle cut is needed. Tool includes ergonomic tactile grip handle for comfort, lightweight magnesium gear case for balance, and 10 ft rubber cord for mobility.

Read More »
Shearing Machinery

Shear offers portable and stationary use.

Suited for burr-free cutting, shearing, and trimming of sheet metal and plastic, Ku 6872 mounts upside down on tool bench, which converts it from portable tool to stationary one. Blades feature 4 cutting edges that do not require sharpening. Able to be operated with one hand, 5.2 A tool offers max torque of 26.5 lb-in., 5,300 no load spm, and capacity of 16 ga in mild steel and 18 ga in mild...

Read More »
Hydraulic Shears are offered with touchscreen interface.
Shearing Machinery

Hydraulic Shears are offered with touchscreen interface.

Cincinnati HS shears are available with Touchscreen Shear Control option that enables programmed, automatic setup of machine functions according to material type and thickness. Mounted on pedestal stand, control features 15 in. LCD color monitor and Windows 2000 OS. It provides Digital Gage Control and Multi-Axis Gaging capabilities as well as Ethernet connectivity for program storage,...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers