Shaft Collars

Quick Clamping Shaft Collars do not require tools to install.
Shaft Collars

Quick Clamping Shaft Collars do not require tools to install.

Suited for applications with frequent setup changes or adjustments, quick clamping shaft collars are made from high quality aluminum with anodized finish. They are single point faced to ensure perpendicularity and proper alignment, and are available with bore sizes from 5/16 to 1Â-½ in. in inch series and 8-35 mm in metric series. Applications include light duty split hub components such as...

Read More »
Hinged Shaft Collars are offered with wrench flats.
Shaft Collars

Hinged Shaft Collars are offered with wrench flats.

Featuring two-piece construction with triple-link hinge, hinged shaft collars are available with round-, hex-, square-, and threaded bores. Wrench flats permit leveraged rotation using standard open-end wrench, allowing shaft or pipe to be turned without damage to surface. Offered in steel and stainless steel, product is available in incremental wrench sizes, with 25 bore sizes from 3/8 to 4 in....

Read More »
Remachineable Shaft Collar Kits aid product maintenance.
Shaft Collars

Remachineable Shaft Collar Kits aid product maintenance.

Suited for prototyping and repairs, Remachineable Shaft Collar Kits feature eight 1- or 2-piece fully assembled steel collars per kit, and each has pilot hole that can be machined by user to match their own bore requirements. Sizes range from 1 1/8 to 3 in. OD with 0.235 in. pilot hole for bore. Applications include building new machinery as well as maintenance for fabricating custom sizes to...

Read More »
Metric Shaft Collars come in 3-80 mm ID sizes.
Shaft Collars

Metric Shaft Collars come in 3-80 mm ID sizes.

Metric Shaft Collars come with metric clamping screws and are made from aluminum, steel, and stainless steel in 1-piece, 2-piece clamp-type, and hinged styles. Featuring smooth and threaded bore configurations, shaft collars can also be machined from Teflon®, nylon, and other thermoplastics in 1- and 2-piece styles and sizes from 6.35-102 mm to provide exact material match for applications...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Shaft Collars

Machinable Couplings, A Custom Fit Without The Wait

When a coupling connecting two different size shafts fails, what do you do? Especially if the shafts are non-standard diameters? Do you stop your production line and await a specially-made replacement? A better solution is machinable couplings. Also known as re-machinable couplings," machinable couplings are designed with a standard bore size in one end and a pilot hole in the other. So, you can...

Read More »
Shaft Collars offer corrosion resistance.
Shaft Collars

Shaft Collars offer corrosion resistance.

Available in 316 SS, yellow zinc plated, and high-strength grade aluminum with anodized finish, corrosion-resistant Shaft Collars are single point faced to ensure perpendicularity and proper alignment. Stainless steel models are suited for food processing, medical, and pharmaceutical applications where washdown is required and contamination from corrosion must be avoided. Yellow zinc plated units...

Read More »
Ringfeder's Ecoloc Provides Strength and Stability For Heavy-Duty Applications
Shaft Collars

Ringfeder's Ecoloc Provides Strength and Stability For Heavy-Duty Applications

Westwood, New Jersey-RINGFEDER's ECOLOC® Series is a competitively priced, internal locking device that provides for higher torques, excellent self-centering ability and axial capacities in rotating machinery for a variety of heavy-duty applications. Applications include, but are not limited to clutches, conveyor belts, turbine rotors, flywheels, brake drums, gears and sprockets. ECOLOC®...

Read More »
Shaft Collars and Couplings can be remachined.
Shaft Collars

Shaft Collars and Couplings can be remachined.

Made from steel, Remachineable Collars and Couplings feature pilot holes to let users remachine them to their own specifications. Collars can be rebored and threaded to match size of worn or replacement shafts, while couplings allow for mating of dissimilar sized shafts. Offered in 1 1/8-3 in. OD sizes, collars come in 1- and 2-piece clamp type styles. Couplings are available in 11 sizes with...

Read More »
Adjustable Locking Collars help position machine components.
Shaft Collars

Adjustable Locking Collars help position machine components.

Offered in aluminum, stainless steel, and carbon steel, threaded retaining ClampNuts are available with AFBMA/ANSI, American National, ISO, Metric, Unified Coarse, Unified Fine, and Unified Constant options. Bore sizes range from 1/8-7Â-¾ in. and 10-200 mm. Plain bore clamp style and split collars, also available, come in 1/8-4 in. and 3-100 mm bore sizes. ClampNuts and collars minimize...

Read More »
Collars and Couplings feature integral mounting flanges.
Shaft Collars

Collars and Couplings feature integral mounting flanges.

Available with plain and tapped holes, Accu-Flange(TM) Collars and Precision Sleeve Flange Couplings enable user to attach components such as pulleys and cams. Collars are machineable and couplings have solid center section for close tolerance fit on ground shafting. Supplied with standard keyway, both are available with Â-½-1 ½ in. bores in SS, steel, and aluminum and will not mar...

Read More »

All Topics