Shaft Collars

Shaft Collars are chrome-plated.
Shaft Collars

Shaft Collars are chrome-plated.

Stafford Solution(TM) collars, suited for use in consumer products as well as medical and laboratory instruments, feature finished appearance and smooth bore. Available in 47 standard sizes from 1/8-3 in. ID, products are offered in 1- and 2-piece styles for applications where aesthetics are important. They are machined from steel, are fully split, and can be custom manufactured for various OEM...

Read More »
Positioning Collars provide fine-tune adjustability.
Shaft Collars

Positioning Collars provide fine-tune adjustability.

Solution Series Micro-Adjustable Positioning Collars consist of 2 knurled collars that clamp directly to shaft and feature male-female connecting hub that provides Â-½ in. adjustment range. Collars connect using 40 pitch threads that operate smoothly, and each travels 0.025 in. per turn. Nine standard sizes range from ¼ to 1½ in. ID. Machined from steel or stainless steel,...

Read More »
Shaft Collars withstand axial loads up to 20,000 lbs.
Shaft Collars

Shaft Collars withstand axial loads up to 20,000 lbs.

PowerRing(TM) non-marring, high-capacity shaft collars employ 2 precision-machined halves pressed together around one embedded ID section and are tightened using multiple clamping screws. Steel units are precision machined flat and square, balanced for high-speed operation, and self-centering when tightened. Providing axial load capacities from 6,200-20,000 lb, depending on size, products are...

Read More »
Wrenching Collars protect pipes and shafts.
Shaft Collars

Wrenching Collars protect pipes and shafts.

Stafford Solution Series Wrenching Collars consist of 2-piece steel collars that install onto pipes and shafts and have wrenching flats on OD. Allowing users to apply torque using standard open-end wrench, they eliminate need for pipe wrenches. Constructed with smooth bore, units are available with IDs in inch sizes ranging from Â-½-1¼ in. ID.

Read More »
Threaded Collars come in one- and two-piece styles.
Shaft Collars

Threaded Collars come in one- and two-piece styles.

Shaft Collars can be custom engineered with pitch diameters up to 12 in. in UNC, UNF, Acme, or bearing lock-nut threads. They can include spanner wrench holes or slots for easy spinning on shaft, knurled OD, or face treatments to accommodate bearing race. Suitable for use with large compressors or line shafts, collars are machined from steel and alloy steel. Applications include heavy equipment...

Read More »
Axial-Thrust Assembly removes shrink-fit and frozen parts.
Shaft Collars

Axial-Thrust Assembly removes shrink-fit and frozen parts.

Solution Series Assembly consists of two steel, 2-piece collars; one which is free to slide on shaft and push against component to be moved, and another which clamps securely to shaft. It provides Â-½ in. range of motion. Available in 8 sizes from ¾ to 2½ in. I.D., assembly can be infinitely repositioned along shaft and offers from 5,000 to 8,000 lb thrust, depending upon...

Read More »
Shaft Collars are chrome plated.
Shaft Collars

Shaft Collars are chrome plated.

Machined from steel and fully split, Chrome-Plated Shaft Collars are offered in one- and two-piece, clamp-type styles, in 47 bore sizes from 1/8 to 3 in. ID. Shaft collars are suitable for use in machinery, instruments, and equipment where aesthetics and corrosion resistance are critical. Custom collars can be produced in larger sizes and/or with special threads, hinges, and knurls.

Read More »
Rotary Encoder Collar can be used to sense shaft speeds.
Shaft Collars

Rotary Encoder Collar can be used to sense shaft speeds.

Aluminum clamp-type collars can be configured with metallic targets to permit shaft speed sensing. Metallic targets can be read by customer-supplier variable reluctance sensors. Collars are unaffected by oils and coolants, and smooth bore will not damage shafts. They are available in one- and two-piece clamp-type designs with bore sizes from 1/2 in. and ODs up to 12 in. Applications include...

Read More »
Couplings and Collars are used in wet applications.
Shaft Collars

Couplings and Collars are used in wet applications.

Stainless Steel Collars, Couplings, and Shaft Adapters are resistant to washdowns, detergents, harsh chemicals, solvents, fuels, and salt water. Collars include 1-piece, 2-piece, hinged, and set-screw designs in bore sizes from 1/8 to 6 in. I.D. Rigid couplings are available in 1-, 2- and 3-piece designs. Products are suitable for use as drive system components in water treatment, pollution...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers