Shaft Collars

Plastic Shaft Collars Materials Match Food Processing Equipment
Shaft Collars

Plastic Shaft Collars Materials Match Food Processing Equipment

Plastic clamp-type shaft collars offered in several thermoplastics, with stainless steel hardware, for use with FDA/USDA approved equipment are available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Plastic Clamp-Type Shaft collars are machined from Teflon®, nylon, and other thermoplastics to provide designers with an exact material match to other system...

Read More »
Hinged Shaft Collars Eliminate Fumbling and Lost Screws
Shaft Collars

Hinged Shaft Collars Eliminate Fumbling and Lost Screws

A line of hinged shaft collars that are ideally suited for applications requiring frequent assembly and disassembly in tight spaces is available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Hinged Shaft Collars feature a triple-link hinge and a captive clamping screw to eliminate fumbling and lost screws in applications requiring frequent assembly and disassembly;...

Read More »
Shaft Collars

Shaft Collar design permits easy repositioning.

Available in 11 sizes from Â-½-2 in. ID, Accu-Mount(TM) Collars feature one solid, square and flat side, with 4 component mounting holes, along with centering hub, and second side that securely clamps to shaft. They are machined from steel with smooth bore to protect shafts and can be supplied with or without keyway. Split design allows wide variety of components such as sprockets, gears,...

Read More »
Anti-Corrosive Shaft Collars for Harsh Environments
Shaft Collars

Anti-Corrosive Shaft Collars for Harsh Environments

Marlborough, January/February 2006. Ruland Manufacturing Co., Inc. now offers shaft collars in both stainless steel and plastic to prevent corrosion in wet or harsh environments. These shaft collars are ideal for wash-down applications such as those found in food processing and marine applications. With typical steel collars, even those with a zinc or nickel finish, water, salt and other...

Read More »
Shaft Collars

Threaded Fasteners are machined to match application needs.

Supplied in one- or 2-piece designs of aluminum, steel, or stainless steel, Stafford Threaded Shaft Collars can be machined with custom OD treatments such as knurls, spanner wrench holes, and wrench flats. Products are available in Â-¼-6 in. IDs with UNC/UNF and ACME threads. They are also offered with locknut stub-ACME, metric, left hand, and other variations of custom threads. Accu-Clamp...

Read More »
Shaft Collars

Set-Screw Collars come in 17 sizes from 4-50 mm ID.

Offered in zinc-plated steel and stainless steel, Metric Set-Screw Collars are fully compatible with any metric equipment sold and serviced worldwide. Clamp-type collars and rigid couplings are supplied with metric socket cap screws. Special sizes up to 250 mm, threaded parts, and wrench flats or other machining are optional.

Read More »
Shaft Collars

Shaft Collars feature integral hub fastener.

Equipped with built-in bearing shim spacer, Series S25FB9 and S25FY9 consist of brass and 303 stainless steel shaft collars, respectively, with ODs from .433-1.496 in. diameter. Units are designed to fit shafts ranging from .12-Â-¾ in. diameter. Integral Fairloc® hub fastener eliminates marred shafts, adds positive metal-to-metal fastening strength along both hub sections, and permits...

Read More »
Thrust Collar allows high load adjustment on shaft.
Shaft Collars

Thrust Collar allows high load adjustment on shaft.

Stafford Thrust Collar Assembly consists of male-female connecting hub that can be located along shaft, allowing one side to be fixed and other side to be adjusted using knurled OD or wrench flat. Providing 3/8 in. axial adjustability, it can be used for applications from pre-loading bearings to crawling heavy components along shaft. Assembly, available in 8 sizes from 3/8-1Â-½ in. ID, is...

Read More »
Shaft Collars are offered with choice of bore design.
Shaft Collars

Shaft Collars are offered with choice of bore design.

Stafford Shaft Collars are available with threaded-, square-, smooth-, hex-, and keyed-bores to match positive drive shafts. Available in 1-piece, 2-piece, and hinged-collar styles, products are machined from steel, 303 stainless steel, and aluminum. Collars, offered in standard inch/metric sizes from 1/8-10 in. ID and 3.175-254 mm, may also be constructed from 316 stainless steel, brass, bronze,...

Read More »
Plastic Shaft Collars suit wash-down environments.
Shaft Collars

Plastic Shaft Collars suit wash-down environments.

Made of acetal with stainless steel hardware for food processing environments, collars are offered in 1- and 2-piece clamp-style designs as well as set screw style. Clamp-style collars will not mar shaft, and design wraps around shaft for optimal holding power. Featuring forged socket hardware, products are single point faced to ensure perpendicularity and proper alignment. Bore sizes range from...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers