Shaft Collars

Shaft Collar features self-locking, quick release design.
Shaft Collars

Shaft Collar features self-locking, quick release design.

Grip Fast(TM) features self-locking/quick release collar with automatic break away release system, and will lock down, lock on, and adjust up or down. Undercut feature allows symmetrical load on bearings and reduces potential of shaft deformation. Available in sizes up to 3 in. ID, lightweight plastic devices are also offered in tapered cones and can be custom designed for specific applications.

Read More »
Shaft Collars feature integral Fairloc® hub fastener.
Shaft Collars

Shaft Collars feature integral Fairloc® hub fastener.

Available in brass and 303 Stainless Steel, respectively, S25FB9 and S25FY9 Series incorporate built-in bearing shim spacer and fit .12-Â-¾ in. dia shafts. Products come in inch and metric sizes with .433-1.496 in. (11-38 mm) dia ODs. Use of Fairloc® hubs permits frequent phase, timing, and position adjustment while adding positive metal-to-metal fastening strength along both hub...

Read More »
Shaft Collars feature quick-release, self-locking design.
Shaft Collars

Shaft Collars feature quick-release, self-locking design.

Offered in inch and metric sizes, Grip Fast(TM) A 7Z34 Series is suitable for fastening rotating components and as limit stop for 23 shaft sizes from 1/8-3 in. Collars absorb vibration and shock, and can be removed or adjusted in seconds using one hand, without tools. To operate, user slides Grip Fast onto shaft to correct location. Unit will automatically lock into position. To release, user...

Read More »
Shaft Collars are offered in double wide version.
Shaft Collars

Shaft Collars are offered in double wide version.

Made from high strength aluminum, lead-free black oxide carbon steel, and stainless steel, double wide shaft collars are available in 1- and 2-piece clamp styles with bore sizes from 1/8 to 1 in. Single point faced to ensure perpendicularity and proper alignment, shaft collars feature additional cap screws to apply pressure to shaft, making them suitable for use as mechanical stops or on split...

Read More »
Shaft Collars are manufactured to customer specifications.
Shaft Collars

Shaft Collars are manufactured to customer specifications.

Manufactured in prototype to production quantities with tolerances to 0.0005 in., Custom Shaft Collars feature smooth, hex, square, metric, radiused, keyed, and threaded bores, and are available in 1- and 2-piece, hinged, or set-screw styles. Bore sizes are from 1/8 to 16 in. ID, and materials include various metals, alloys, and engineering plastics. They can be machined with drilled and tapped...

Read More »
Chrome Plated Shaft Collars Offer Bright Finish and Corrosion Protection
Shaft Collars

Chrome Plated Shaft Collars Offer Bright Finish and Corrosion Protection

A full line of chrome plated shaft collars for use in machinery, fixtures, and equipment where appearance and corrosion resistance are important is available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Solution(TM) Series Chrome Plated Shaft Collars are available in one- and two-piece styles and 47 standard sizes from 1/8 to 3" I.D. Developed for applications where...

Read More »
Rigid Coupling Adapters Solve Shaft Compatibility Problems
Shaft Collars

Rigid Coupling Adapters Solve Shaft Compatibility Problems

A line of rigid clamp-type coupling adapters that fit securely over an output shaft to extend its length or change the mating configuration is available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Rigid Coupling Adapters have a clamp-type female end that fits securely over an existing output shaft and feature a machineable male end with extended shafts, keyways,...

Read More »
Clamp suits milling and lathe operations.
Shaft Collars

Clamp suits milling and lathe operations.

SIDE-LOC Xpansion clamp holds parts on bore when tapered screw is not accessible. Turning socket head cam on side moves tapered plunger to expand clamp. Locking ring provides accurate preset diameter and rigidity for machining. Designed in two styles, mill version can be machined from 1.120-.710 in. and lathe version from 2.09-.710 in. Lathe version has straight mounting shanks of 1 in.

Read More »
Plastic Shaft Collars Materials Match Food Processing Equipment
Shaft Collars

Plastic Shaft Collars Materials Match Food Processing Equipment

Plastic clamp-type shaft collars offered in several thermoplastics, with stainless steel hardware, for use with FDA/USDA approved equipment are available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Plastic Clamp-Type Shaft collars are machined from Teflon®, nylon, and other thermoplastics to provide designers with an exact material match to other system...

Read More »
Hinged Shaft Collars Eliminate Fumbling and Lost Screws
Shaft Collars

Hinged Shaft Collars Eliminate Fumbling and Lost Screws

A line of hinged shaft collars that are ideally suited for applications requiring frequent assembly and disassembly in tight spaces is available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Hinged Shaft Collars feature a triple-link hinge and a captive clamping screw to eliminate fumbling and lost screws in applications requiring frequent assembly and disassembly;...

Read More »

All Topics