Servomotors

Servomotors

Hybrid Motor suits high-power motion control applications.

Specified for 460 or 400 Vac standards, Allen-Bradley High-Power Kinetix (HPK) Series combines induction and servo motor technology to promote precision and efficiency in material handling or web converting applications. Electrical winding design is optimized to mimic speed/torque curve of permanent magnet servo motors. Supplied in ratings up to 150 hp, motors are equipped with single- or...

Read More »
Bluetooth Module for the MAC Motors
Servomotors

Bluetooth Module for the MAC Motors

Wireless expansion module for the MAC motors gives total freedom from cables JVL has recently developed a new expansion module (MAC00-FB4) that enables Bluetooth connection directly to the MAC range of motors. Via the BlueTooth link, the motor can be setup or controlled using the same features that a serial connection offers. Using the module, motor control is typically done from a mobile...

Read More »
High-Speed Module for the MAC Motors
Servomotors

High-Speed Module for the MAC Motors

Multi-axis, 460kbit high-speed interface for the integrated MAC motors JVL can now offer yet another expansion module (MAC00-FS1) for the integrated MAC motors, MAC50-141 and MAC800. This module can be used in multi-axis applications with up to 255 units on the same RS485 bus with repeaters. I/O, position, error-status, etc., are scanned locally and can be read very rapidly from a PC or PLC. For...

Read More »
Servomotors

MAC Motors Now In Use World-Wide

MAC800 has created great interest internationally Since its introduction in 2003, the MAC800 has generated interest internationally. Great interest from both domestic customers in Denmark and JVL's worldwide representatives has resulted in a significant number of these motors being tested and installed with several large international end-users. Interest from customers has typically been based on...

Read More »
Nanomotion's DuraMotor Series: Productivity and Cleanliness in Demanding Motion Profiles
Servomotors

Nanomotion's DuraMotor Series: Productivity and Cleanliness in Demanding Motion Profiles

Nanomotion is proud to announce the upcoming release of the DuraMotor series, which provides superior levels of durability and reliability for a wide range of applications, including: Â-· Ambient, Vacuum and Ultra High Vacuum (UHV) operation · Demanding move & settle profiles with high duty cycle · High speed motion profiles The DuraMotor provides the utmost in durability...

Read More »
Servomotors

Brushless Servo Motors have torque-optimized design.

Sealed to IP65, UL- and CE-rated MPN series employs MaxPlus motor technology and is modified to match mechanical and electrical characteristics of Rockwell Automation/Allen-Bradley N-Series motors. Use of neodymium magnets promotes torque, and inertia is typically within 10% of N-Series. Front motor mount, shaft dimensions, connectors, and electrical Ke (back-emf) are identical to that of...

Read More »
Servomotors

Motion Control System features compact rotor design.

OEM Series SmartMotor(TM) Model SM2315DT combines servo motor, amplifier, and motion controller into standard NEMA 23 frame dimensions. Featuring 8-pole compact rotor design, it delivers up to 112 oz-in. of peak torque while maintaining up to 57 oz-in. of continuous torque with maximum speed capability of 4,700 rpm.

Read More »
Linear Servo Motor provides acceleration up to 8.4 G.
Servomotors

Linear Servo Motor provides acceleration up to 8.4 G.

Featuring full servo control and max velocity of 6.4 ft/sec, Model QCI-L6 is suited for high acceleration moves such as pick-and-place, wire bonding, semiconductor, and parts inspection. Servo control eliminates problems of resonance, stalling, and excess heating. One micron encoder allows for ±25 micron accuracy and is repeatable to ±10 microns. All active components are on moving...

Read More »
Servomotors

Brushless Servo Motors suit space-restricted applications.

Maintenance-free MUS Series is fitted with high flux density Neodymium Iron Boron magnets, reducing rotor inertia. Motors cover torque range from 380 W to 3.5 kW and feature torque-to-inertia ratio that promotes acceleration and dynamic responses. Design and location of thermal sensor eliminate risk of overheating and demagnetizing.

Read More »
Servomotors

GE Fanuc Automation Features Innovative Industry-Leading CNC/Servo Technology at IMTS 2006

Impressive Demonstrations of New CNC and Servo Products Highlight "Changing The Game" Theme Enabling Competitive Advantage for Manufacturers CHARLOTTESVILLE, Va. September 6, 2006 - GE Fanuc Automation, a unit of GE Industrial and the leading supplier of computer numerical controls (CNC) and related products, will be showcasing hardware, software and machine tool productivity solutions at this...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers