New Servo Systems Products Page 1

Servo Motor Feedback System mounts directly to motor shaft.

Eliminating radial runout and axial offset, SinCosÃ-® SEK52 with HIPERFACEÃ-® Interface features integral scanning to automatically compensate for eccentricity errors. Solution requires no bearings, facilitating installation, and provides high-resolution performance with 512 steps per revolution and 16 sine/cosine periods per revolution. System comes in 14 mm metal housing that is...

Servo Motor Feedback System is IP65 rated.

Suited for applications requiring high resolution, SinCosÃ-® SRS64 Motor Feedback System provides positioning with 32,768 steps/rev. Single-turn system offers 1,024 sine/cosine cycles per turn that after A/D conversion in servo drive produce up to 4 mil counts/turn. Unit features operating temperature range of -20 to 110Ã-ºC with 100/10 g/ms resistance to shock and 20/10-2,000 g/Hz...

Servo System cuts cycle time of large machine tools.

Machining Point Control features Acceleration Rate Sensor Unit, which simultaneously detects acceleration rate of 3 axes at machine. Output of unit is taken into account by CNC servo loop through standard separate detector interface unit. Servo system software then uses detected acceleration rate to control motor's motion, suppressing vibration, stabilizing machine at tool tip, and enabling...

AC Servo Systems provide 0.08-26.4 lb-ft of peak torque.

SureServo(TM) digital brushless servo systems include 8 servo motors, in brake and non-brake models, that can be operated with 1 of 3 servo drives. Systems range from 100 W to 3 kW continuous power, and can be controlled in position, velocity, or torque mode. Utilizing 8 programmable inputs and 5 programmable outputs, real-time connectivity with any control system is assured. Configuration and...

Lower Barriers to Delivering Integrated Supply Solutions

A commitment to integrated supply is not for the faint of heart, and requires substantial resources dedicated to sourcing, logistics, taxonomy and identification, multi-shift supply room staffing, KPI reporting and more. How do you get into this space while overcoming significant barriers to entry?

Servo System suits food and packaging applications.

AirNC electro-pneumatic servo system incorporates position control, speed control, and force control. System integrates into main control system through digital, analog, or serial communications. Modular components include programmable control unit, ND-7 high performance proportional electro-pneumatic valves, and pneumatic actuators with integrated SSI transducers. Repeatability is Ã-

Servo System facilitates setup and operation.

Model S200/AKM, comprised of Kollmorgen S200 servo drive and AKM servomotor, features SMARTFeedbackDevice that allows one connector and cable to provide system power and feedback. Its 800 Hz velocity loop bandwidth eliminates servo loop tuning, while 24-bit resolution feedback and 3-5 kHz current loop bandwidth provide smooth motion and rapid start and stop action. Motors, potted and IP65 sealed,...

Actuator features Xenus indexer.

ServoTube actuator makes positioning subsystem for stacking, cutting, pressing, coating, filling, picking, and placing. It requires 50/60 Hz AC power, eliminating need for pneumatic or hydraulic lines. External multi-position thumbwheel switch can call up Xenus' stored motion profile. Continuous force ranges from 51-104 N and peak force is 662 N. Actuator attains 527 m/sÃ-² acceleration and 6...

Integrated Servomotor incorporates Modbus-® protocol.

SilverMaxÃ-® combines motor, controller, driver, and encoder and allows register mapping between SilverMax and Modbus hosts such as PLCs, HMIs, and PCs. Multi-tasking ability allows application program to run while registers are being read and modified by Modbus host. Third-party products such as AnyBusÃ-® can be used to attach to Fieldbus networks such as Profibus, DeviceNet, or Ethernet.

Servo System simplifies transition to servo drive.

PosiDrive pre-programmed servo system eliminates programming code for conversion to servodrive. UL and CE approved, plug-and-play unit combines 460 V servomotor and digital amplifier/controller with touch screen interface, which handles machine set-up, tuning, and troubleshooting. Available in fractional to 20 hp packages, brushless RA servomotor includes neodymium iron boron magnets, resolver...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.