Servo Controller features diagnostic capability.
Pompano Beach, FL - June 4, 2007 - RTP announces the third in the previously announced line of intelligent I/O modules, the Intelligent Servo Card. Now OEMs and owners of rotating machinery can experience a new level of performance and availability from their equipment. With scan rates of this module between 1000 to 2000 scans per second depending on the size of the application, higher...
Read More »Plug-In Servo Drive suits limited-space applications.
Based on MotionChip(TM) drive technology, intelligent PIM2403 module controls DC, brushless, linear, and step motors up to 75 W and embeds motion control, drive, and PLC functionalities in one 59 x 42 x 20 mm open frame unit. Programmable in EasyMotion Studio with Technosoft Motion Language and graphical tools, drive can execute motion modes in stand-alone or multi-axis operations. Distributed...
Read More »Plug-In Servo Drive suits limited-space applications.
Based on MotionChip(TM) drive technology, intelligent PIM2403 module controls DC, brushless, linear, and step motors up to 75 W and embeds motion control, drive, and PLC functionalities in one 59 x 42 x 20 mm open frame unit. Programmable in EasyMotion Studio with Technosoft Motion Language and graphical tools, drive can execute motion modes in stand-alone or multi-axis operations. Distributed...
Read More »
Servo Motor Feedback System mounts directly to motor shaft.
Eliminating radial runout and axial offset, SinCos-® SEK52 with HIPERFACE® Interface features integral scanning to automatically compensate for eccentricity errors. Solution requires no bearings, facilitating installation, and provides high-resolution performance with 512 steps per revolution and 16 sine/cosine periods per revolution. System comes in 14 mm metal housing that is resistant to...
Read More »
Benefits of Private Labeling for Nutrition/Supplement Manufacturing
Makers Nutrition is #YourSupplementSolution for all things dietary supplements. Since we are an all-in-one provider, private labeling supplements has never been easier. Manufacturing, label design, packaging and order fulfilment-we do it all so you don't miss a beat.
Read More »
Servo Motor Feedback System mounts directly to motor shaft.
Eliminating radial runout and axial offset, SinCosÃ-® SEK52 with HIPERFACEî Interface features integral scanning to automatically compensate for eccentricity errors. Solution requires no bearings, facilitating installation, and provides high-resolution performance with 512 steps per revolution and 16 sine/cosine periods per revolution. System comes in 14 mm metal housing that is...
Read More »
Servo Motor Controller is CANopen enabled.
Designed for NEMA 17 and NEMA 23 frame I-Grade servo motors, SilverDust IGC single axis controller comes with serial communications (RS-232, RS-485), CANopen and, 7 I/O, and includes breakouts for power and communications. Other features include 12-48 Vdc input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32 K non-volatile memory, along with 100:1 inertial miss-match,...
Read More »
Servo Motor Controller is CANopen enabled.
Designed for NEMA 17 and NEMA 23 frame I-Grade servo motors, SilverDust IGC single axis controller comes with serial communications (RS-232, RS-485), CANopen and, 7 I/O, and includes breakouts for power and communications. Other features include 12-48 Vdc input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32 K non-volatile memory, along with 100:1 inertial miss-match,...
Read More »Servo Drivers update 100 drives in under 100 µsec.
Canton, MA, May 7, 2007- Copley Controls announces two state-of-the-art open standard EtherCAT-compatible Accelnet servo drives. The drives, which deliver 18A and 36A peak, respectively, combine Accelnet versatility and Ethernet speed for centralized control of multi-axis automation. The drives enhance the performance of distributed motion control systems too. High perfomance multi-axis robotic...
Read More »Servo Drivers update 100 drives in under 100 -µsec.
Canton, MA, May 7, 2007- Copley Controls announces two state-of-the-art open standard EtherCAT-compatible Accelnet servo drives. The drives, which deliver 18A and 36A peak, respectively, combine Accelnet versatility and Ethernet speed for centralized control of multi-axis automation. The drives enhance the performance of distributed motion control systems too. High perfomance multi-axis robotic...
Read More »Delta Tau & Panasonic Announce: Turbo PMAC2 Controller for Reatime Express(TM) Servo Network
Turbo PMAC2 Controller for Panasonic Realtime ExpressTM Provides up to 32-Axis Control CHATSWORTH, CA - MARCH XX, 2007 - Delta Tau Data Systems, the technology leader in multi-axis programmable motion control solutions, and Panasonic Electric Works Corporation of America, have announced the world class Turbo PMAC2 for Realtime ExpressTM (RTEX). The control for Panasonic A4N servomotors and...
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
