Ethernet/IP Protocol Now Added to PositionServo Communication Options
UXBRIDGE, MA - DECEMBER 17, 2008 - Lenze-AC Tech announces the release of the EtherNet/IP Communication Option for the PositionServo drive. EtherNet/IP (the IP stands for Industrial Protocol) is a member of the DeviceNet and ControlNet family of Common Industrial Protocols (CIP). As a member of the CIP family, EtherNet/IP can utilize the same set of pre-defined common objects, thus making...
Read More »
Servo Motor Controller is designed for ADAM-5550 series PACs.
ADAM-5240 4-axis servo motor control module simplifies stepping and pulse-type servo motor control. Embedded with intelligent novaR MCX314-motion ASIC card that includes various motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, programmable T/S-curve acceleration/deceleration rate, and position management functions, device performs motion control...
Read More »
Servo Motor Controller is designed for ADAM-5550 series PACs.
ADAM-5240 4-axis servo motor control module simplifies stepping and pulse-type servo motor control. Embedded with intelligent novaR MCX314-motion ASIC card that includes various motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, programmable T/S-curve acceleration/deceleration rate, and position management functions, device performs motion control...
Read More »
Compact Servo Drive offers flexibility in low-power range.
Available in models from 50 W to 3.5 kW, IndraDrive Cs provides open support of multiple Ethernet-based communication busses for SERCOS III, ProfiNet, EtherNet/IP, and EtherCat communications. Universal multi-encoder interface, also included, supports Hiperface-®, EnDat 2.1/2.2, 1Vss, 5 V TTL, and Rexroth MSM servo motors. Product may also be equipped with drive-based PLC, integrating motion and...
Read More »
5 Common Liquid Injection Molding Mistakes (And How to Avoid Them)
This guide offers insights about steering clear of common LIM problems and maximizing your project's efficiency.
Read More »
Compact Servo Drive offers flexibility in low-power range.
Available in models from 50 W to 3.5 kW, IndraDrive Cs provides open support of multiple Ethernet-based communication busses for SERCOS III, ProfiNet, EtherNet/IP, and EtherCat communications. Universal multi-encoder interface, also included, supports HiperfaceÃ-®, EnDat 2.1/2.2, 1Vss, 5 V TTL, and Rexroth MSM servo motors. Product may also be equipped with drive-based PLC, integrating motion...
Read More »
DE-STA-CO Announces Next-Day Shipment of 601RDM Index Drives
Auburn Hills, Michigan, September 22, 2008 - In a commitment to meet the industry's needs for shorter lead times, DE-STA-CO has announced next-day shipment of the most common models of its 601RDM index drive. To ensure availability to all customers, the express shipping policy is limited to a maximum of two units per order. The Xpress 601RDM is offered with 4, 6 or 8 stops and a standard drive...
Read More »
DE-STA-CO Announces Next-Day Shipment of 601RDM Index Drives
Auburn Hills, Michigan, September 22, 2008 - In a commitment to meet the industry's needs for shorter lead times, DE-STA-CO has announced next-day shipment of the most common models of its 601RDM index drive. To ensure availability to all customers, the express shipping policy is limited to a maximum of two units per order. The Xpress 601RDM is offered with 4, 6 or 8 stops and a standard drive...
Read More »
Servo Motor Controller features CANopen option.
Designed to drive I-Grade NEMA 17, 23, and some 34 frame motors generating 21-300 oz-in. continuous torque, Model IG-J1 features CANopen option, which can be configured for peer-to-peer, master, or slave. Controller supports CiA CANopen Drives and Motion Control Profile 402, which allows master CANopen devices to communicate using standard set of motion commands. Seven bi-directional I/O, 12-48 V...
Read More »
Servo Motor Controller features CANopen option.
Designed to drive I-Grade NEMA 17, 23, and some 34 frame motors generating 21-300 oz-in. continuous torque, Model IG-J1 features CANopen option, which can be configured for peer-to-peer, master, or slave. Controller supports CiA CANopen Drives and Motion Control Profile 402, which allows master CANopen devices to communicate using standard set of motion commands. Seven bi-directional I/O, 12-48 V...
Read More »
AGC Series Gear-Driven Goniometric Cradles
±45° rotary positioning with unobstructed 360° view of customer load Precision worm gear drive for outstanding accuracy and repeatability Direct encoder options available Horizontal or vertical mounting orientation AGC motorized mechanical goniometers are used in applications where 90° of angular travel is needed with the payload at the center of rotation, or where two axes of rotation are...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
