Servo Motor Controllers and Drives

Servo Motor Feedback System mounts directly to motor shaft.
Servo Motor Controllers and Drives

Servo Motor Feedback System mounts directly to motor shaft.

Eliminating radial runout and axial offset, SinCos® SEK52 with HIPERFACE® Interface features integral scanning to automatically compensate for eccentricity errors. Solution requires no bearings, facilitating installation, and provides high-resolution performance with 512 steps per revolution and 16 sine/cosine periods per revolution. System comes in 14 mm metal housing that is...

Read More »
Servo Motor Controller is CANopen enabled.
Servo Motor Controllers and Drives

Servo Motor Controller is CANopen enabled.

Designed for NEMA 17 and NEMA 23 frame I-Grade servo motors, SilverDust IGC single axis controller comes with serial communications (RS-232, RS-485), CANopen and, 7 I/O, and includes breakouts for power and communications. Other features include 12-48 Vdc input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32 K non-volatile memory, along with 100:1 inertial miss-match,...

Read More »
Servo Motor Controllers and Drives

Servo Drivers update 100 drives in under 100 µsec.

Models AEP-90-18 and AEP-90-36 open standard EtherCAT-compatible Accelnet servo drives for brushless and brush motors deliver 18 and 36 A peak, respectively. Running on 20-90 Vdc power, operating modes include torque, velocity, trajectory tracking, point-to-point, and homing. Drives come equipped with Endat 2.2, Hiperface, incremental, and analog encoder feedback options. Interfaces include two...

Read More »
Servo Motor Controllers and Drives

Delta Tau & Panasonic Announce: Turbo PMAC2 Controller for Reatime Express(TM) Servo Network

Turbo PMAC2 Controller for Panasonic Realtime ExpressTM Provides up to 32-Axis Control CHATSWORTH, CA - MARCH XX, 2007 - Delta Tau Data Systems, the technology leader in multi-axis programmable motion control solutions, and Panasonic Electric Works Corporation of America, have announced the world class Turbo PMAC2 for Realtime ExpressTM (RTEX). The control for Panasonic A4N servomotors and...

Read More »
Servo Motor Controller features sample rates to 20 kHz.
Servo Motor Controllers and Drives

Servo Motor Controller features sample rates to 20 kHz.

Intended for up to 100 W brush motors with quadrature encoders, 3C20 digital motion controller includes 30 MIPS, 16-bit DSP coupled with 100 W Hbridge on single 2 x 2 in. card. This single-axis dc servo motor controller/amplifier features profile generator with built-in trapezoidal profile capability. Position, velocity, and acceleration/jerk parameters all have 32-bit or greater precision. Dual...

Read More »
Servo Motor Controllers and Drives

Ethnernet Servo Drives Help to Redefine the Speed of Food Tray Sealing

o all-servo motion controlled by 100 Mbits/sec network seals 200 trays/minute Fort Smith, AR, September 11, 2006 - Ethernet-compatible servo motor drives are underpinning a breakthrough in the speed and flexibility of food tray sealing. The availability of this new generation of networked motion control technology provided the platform for Ishida to re-think its machine control system...

Read More »
Servo Motor Controllers and Drives

Baldor Announces New Washdown H2 Adjustable Speed Drives

September 28, 2006 Baldor Electric Company, Fort Smith, Arkansas based manufacturer of energy saving industrial electric motors, drives and generators, announces the addition of new washdown adjustable speed drives to its H2 family. These new drives are rated NEMA 4X and are available from 1 through 10 horsepower. The new H2 washdown drives are available in open-loop, encoderless and closed-loop...

Read More »
Serco Drives are built to survive environmental extremes.
Servo Motor Controllers and Drives

Serco Drives are built to survive environmental extremes.

Comprised of intelligent digital servo drives and analog servo amplifiers, ExtrIQ series operates over -40 to +70°C range and withstands humidity, unlimited altitude, vibration levels over 15G, and mechanical shock. Products are based on SimplIQ technology, which provides feedback options, programming capabilities, communications protocols, and fully digital motion controller. In operating...

Read More »
Automation Systems integrate Category 3 safe stop.
Servo Motor Controllers and Drives

Automation Systems integrate Category 3 safe stop.

Suited for motion and control functions from 1-9 axes, PMCprimo combines intelligence and drive in one compact unit, enabling users to implement cross cutting, flying saw, or labeling as process is running, without need for extensive programming. PMCtendo DD enables users to operate all common types of motors, from servomotors to asynchronous and linear motors. It can also undertake additional...

Read More »
Servo Drives work with various types of motors.
Servo Motor Controllers and Drives

Servo Drives work with various types of motors.

Via selection of feedback choices and input command sources, DigiFlex® Performance(TM) series can drive permanent magnet brushed or brushless motors, voice coil actuators, and closed-loop ac induction motors. Flexible I/O and event control assignments permit drive configuration without having to reconfigure system. While built for configurability, series also offers power range scalability...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics