FS10A Analyzer Flow Switch/Monitor with SP76 Adapter for NeSSI Systems
Switches

FS10A Analyzer Flow Switch/Monitor with SP76 Adapter for NeSSI Systems

Ideal for Oil/Gas Refining, Chemical Processing, Stack Monitoring, Advanced Materials, Pharmaceuticals, Semiconductor Fabrication San Marcos, CA - August 26, 2010 - Process and plant engineers in search of a flow switch/monitor that can be easily incorporated into gas and liquid process sampling systems will find that the Model FS10A Analyzer Flow Switch/Monitor from Fluid Components...

Read More »
Cameras

DALSA to Present at KOFAS 2010

How Advanced Vision Solutions Enhance Factory Automation WATERLOO, Ontario - September 2, 2010 - DALSA Corporation [TSX: DSA], a global leader in digital imaging technology, together with its distributor ENVISION Co., Ltd, will feature the latest advancements in image sensors, cameras and processing at, September 7-10 in Seoul, Korea. DALSA's vision solutions will be showcased at the ENVISION...

Read More »
North Carolina HazMat Regional Response Teams Select RAE Systems' Wireless AreaRAE Rapid Deployment Kits
Sensors / Detectors / Transducers

North Carolina HazMat Regional Response Teams Select RAE Systems' Wireless AreaRAE Rapid Deployment Kits

SAN JOSE, Calif. - RAE Systems Inc. (NYSE AMEX: RAE), a leader in delivering innovative sensor solutions to industrial, energy, environmental, and government safety markets worldwide, announced North Carolina Hazardous Material Regional Response Teams (RRT) have added RAE Systems' AreaRAE wireless toxic-gas- and radiation-detection monitors to their equipment base serving six of its seven...

Read More »
Calibrators

State-of-the-art 3-Component Force Calibration System for 3-Component Force Sensors, Dynamometers, Crash Plates and Force Plates

At its headquarters in Winterthur, Kistler Instrumente AG has commissioned a new 3-component calibration system for force sensors. Kistler will now calibrate its 3-component force sensors as well as dynamometers, force plates and crash plates on this system. The new calibration system was manufactured by an established test equipment and systems specialist to a tight yet comprehensive Kistler...

Read More »
Sensors / Detectors / Transducers

CMOS Image Sensors support feature phone market.

Built on 1.75 micron OmniPixel3-HS(TM) architecture, Model OV2659 features 1/5 in. optical format and achieves low-light sensitivity of 950 mV/lux-sec. Model OV2643, with Â-¼ in. optical format, implements 2.2 micron OmniPixel3-HS architecture, which achieves sensitivity of 1,250 mv/lux-sec. Both 2 megapixel sensors deliver 720p native HD video at 30 frames/sec, offer automatic image control...

Read More »
Absolute Pressure Sensor provides stable output under varying temperatures.
Sensors / Detectors / Transducers

Absolute Pressure Sensor provides stable output under varying temperatures.

Employing QMEMS pressure-sensing in 7.0 x 5.0 x 2.0 mm package, Model XP-6000CA measures pressure from 30-130 kPa with total pressure accuracy of ±30 Pa and 0.3 Pa resolution. Unit provides stable output even under varying external temperatures and environmental conditions because sensor element is made of quartz crystal. Capable of sensing equivalent of approximately 3 cm change in...

Read More »
Rotary Position Sensors support 0-10 Vdc analog voltage output.
Sensors / Detectors / Transducers

Rotary Position Sensors support 0-10 Vdc analog voltage output.

Suited for factory automated systems and process control machinery, single output Model SRH501P and dual output Model SRH502P are based on Hall Effect technology, which enables them to operate in high dither vibration conditions with no deterioration of sensing element. Units are available factory-programmed with any one of 341 different angles from 20-360°, in 1° increments. With...

Read More »
Miniature Absolute Encoders feature 24 mm dia housing.
Encoders

Miniature Absolute Encoders feature 24 mm dia housing.

TURCK 2430 shaft and 2440 hollow-shaft miniature encoders assign unique output for each position and retain specific position data, even if equipment power is turned off. Non-contact, rugged units have maximum speed rating of 12,000 rpm, with temperature range of -20 to +85Â-ºC to suit diverse plant environments. Radial and axial cable outlet options are available.

Read More »
Ceramic Thermostats come in 5 stud sizes.
Thermostats

Ceramic Thermostats come in 5 stud sizes.

CRA and ORA Series Â-½ in. Disc Thermostats feature ceramic case for handling temperatures up to 500°F. Snap-action thermostats, available in stud sizes 6-32, 8-32, 10-32, M3, and M4, are rated at 100,000 cycles at 125 Vac 15 A resistive and 250 Vac, 10 A resistive. Able to be set for contacts to open/close on temperature rise, RoHS-compliant products also feature automatic reset and...

Read More »
Sensors / Detectors / Transducers

All Industrial-Safety Expands Hazardous Gas Detection Equipment & Custom Services

Emphasis on Variety and Customer Service is Key Edgewater Park, NJ. - To ensure the best selection for it's customers, All Industrial-Safety Products Inc., leading distributor of industrial safety products, has recently expanded it's hazardous gas protection offerings to include products that previously have been difficult to find in the North American marketplace. Gas detectors are OSHA required...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics