Accelerometers

Kionix Accelerometer Revs up Cypress PSoC® First Touch Kits

Ithaca, New York, USA - Tuesday, August 31, 2010 - Kionix, Inc. today announced that Cypress Semiconductor Corporation has selected the Kionix KXSC7 accelerometer for use in the new CY8CKIT-014 PSoC® 5 FirstTouchTM Starter Kit for the revolutionary PSoC 5 programmable system-on-chip architecture, powered by the 32-bit ARM® Cortex(TM)-M3 processor. Including an accelerometer in the...

Read More »
Containment Berms Offer Rugged Ground Protection with Higher Puncture Resistance
Berms

Containment Berms Offer Rugged Ground Protection with Higher Puncture Resistance

Aire Industrial has included in its containment berms line up the option of an integral track mat welded directly to the berm floor. This feature will provide superior puncture resistance and give the berm an additional immovability in areas of wind or climate instability. Containment berms designed for heavy traffic operations can utilize the supplemental component to extend the service life and...

Read More »
Sulfur Dioxide Sensor has 6 month calibration cycle.
Sensors / Detectors / Transducers

Sulfur Dioxide Sensor has 6 month calibration cycle.

Utilizing smart sensor technology, network-enabled Model 5100-10-IT supports non-intrusive, one-person calibration and provides 8-character, fixed and scrolling LED display for setup with menus. Output choices include 4-20 mA, serial RS-485 Modbus RTU interface, SMC Sentry digital bus interface, and optional 8 A integral Alarm/Warning relays plus 2 A trouble alarm relay. Other options include...

Read More »
Inductive Angle Encoder withstands harsh environments.
Encoders

Inductive Angle Encoder withstands harsh environments.

Available with ODs from 75-250 mm, IncOder uses absolute inductive measuring technique and offers measurement performance unaffected by humidity, moisture, condensation, or dust. Components of this non-contact, absolute angle encoder include powered stator and passive rotor, each shaped like flat ring. Through-bore size accommodates larger through-shafts, slip rings, cables, etc., while flat,...

Read More »
LEM Introduces Energy-Meter/Transducer Combination to Meet prEN 50463 in Traction Applications
Meters

LEM Introduces Energy-Meter/Transducer Combination to Meet prEN 50463 in Traction Applications

MILWAUKEE, WI and GENEVA, Switzerland - LEM has announced the first package of components specifically designed to enable rail-traction designers to meet the provisional EN 50463 standard for on-board energy monitoring. Included in the announcement, which comprises an energy meter with matched current and voltage transducers, are: o A new, enhanced version of LEM's EM4T energy meter, EM4T II,...

Read More »
I2C Temperature/Voltage Monitor enhances system operation.
Electrical Monitors

I2C Temperature/Voltage Monitor enhances system operation.

Intended for 3 and 5 V systems, LTC2990 incorporates 14-bit ADC, 10 ppm/°C voltage reference, and IÂ-²C digital interface in one RoHS-compliant, 10-lead MSOP to provide submillivolt voltage resolution. Design enables configuration of 4 single-ended voltage inputs to measure any combination of internal temperature, remote temperature, remote voltage, and internal VCC for single or...

Read More »
Differential Pressure Switches range from 7 in. wcd to 2500 psid.
Switches

Differential Pressure Switches range from 7 in. wcd to 2500 psid.

Featuring rugged stainless steel construction, corrosion-resistant Series 102/103 is certified for service in non-hazardous or hazardous locations. Pressure sensing assembly of Series 102 features piston and is suited for low-to-high differential pressure processes, while Series 103 uses diaphragm piston combination and is intended for low-to-medium differential pressure processes. With ability...

Read More »
Pressure and Flow Sensors target microfluidic systems.
Sensors / Detectors / Transducers

Pressure and Flow Sensors target microfluidic systems.

Mitos Sensor Units provide flexible system for measuring and displaying pressure and flow rates in microfluidic systems. All data is displayed in real-time on display unit that interfaces with each sensor via push-and-click action. Comprising 5 flow rate sensors and 1 pressure sensor (-0.5 to 30 bar), range is fully interchangeable, and each device can run stand-alone or integrated with Mitos...

Read More »
Sensors / Detectors / Transducers

Piezoelectric Pressure Sensors aid composite component manufacturing.

Type 6162A sensors offer sensitivity of 16.9 pC/bar and measuring range of 0-200 bar, while Type 6163A units have sensitivity of 4 pC/bar with range of 0-1,000 bar. Both piezoelectric sensors are suited for measurement of cavity pressure during injection molding and pressing of low-viscosity melts. They detect minute changes in pressure in processing of curable, crosslinking molding compounds....

Read More »
Glass

Continuous Filament, Glass Fiber Mat suits closed-mold processes.

Offering thermal stability and fire retardant properties, Uniconform® glass fiber mat contains no chemical binder, synthetic core, or stitching yarns, enabling thermal stability and resistance to water permeability. Laminates can withstand temperatures up to 200°C with no permanent damage. Compatible with unsaturated polyester, vinyl-ester, and epoxy resins, mechanically bonded...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics