Cantilever Sensor works in air or fluids.
Scentris(TM) sensor array, for commercial applications, uses cantilever surface coated with material that has selective affinity for given target substance. When target substance encounters cantilever, it generates mechanical signal that bends or changes resonance frequency of cantilever. Single sensor can be coated to detect array of different chemical agents. It measures cantilever deflections...
Read More »Accelerometer measures vibration on structures.
Ultra miniature ceramic shear accelerometer type 8778A500 offers 10 mV/g vibration measurement sensitivity, 0 to 500 g measuring range, and a Ã-
Read More »Torque Transducer mounts in-line to SAE or Metric flanges.
Non-contact, rotary Model RTC sensor transmits torque signal to RF receiver, delivering output of 0 to 10 V, proportional to torque, or optional 4 to 20 mA output. Operating range is 1,500 to 170,000 in.-lb, with running speeds up to 15,000 rpm, depending on range. RF telemetry package is induction-powered by stationary loop antenna coupled to power supply and receiver. Transmitter may be...
Read More »Synchro-Resolver-Encoder Card keeps out noise.
Four-channel IB card plugs into any IBM-AT compatible computer. It may be user-populated with any combination of Synchro/Resolver to Digital and/or Digital to Synchro/Resolver converters with industry-standard pin-outs. Internal micro-transformers isolate signal and reference lines, isolate field wiring from bus, and provide noise immunity. This preserves integrity of bus, and eliminates concerns...
Read More »No Pencils Required: From Thinking to Knowing Through Mobility
This ebook provides a detailed guide on how mobility and digital data management systems (DDMS) can increase your company's overall effectiveness and efficiency.
Read More »Fiberoptic Sensor Amplifier has dual digital display.
FS-V20 offers 50 micro second response time, detecting up to 10,000 targets per second. Four-element LED light source provides detection distances up to 1800 mm, plus stable operation in harsh environments. Six user selectable light power modes, viewable on display, offer 6 levels of detection distances. High resolution mode digitizes received light to 16 bits or 65,520 levels. FS-V20 supports...
Read More »Gas Warning Systems are completely installed in 3 steps.
Comprised of gas detector, control unit, and combined beacon/sounder, 123 systems provide early warning to workers exposed to toxic gas, combustible gas, or dangerous oxygen levels. Systems are supplied complete with all necessary cabling, and offer 4 LEDs (2 for each alarm level, 1 power supply, and 1 fault). 123 systems detect oxygen, methane, chlorine, carbon monoxide, nitrogen dioxide, and...
Read More »Paramagnetic Oxygen Transmitter provides oxidation control.
Series 2200 includes control unit, EX control unit, and oxygen transmitter. Control unit works with 1 to 6 oxygen transmitters, and is certified for use in hazardous areas. Digital communications are enabled with Modbus protocol provided. EX control unit has above features but is also certified for EX hazardous areas. Transmitter provides intrinsically safe, linear, 4 to 20 mA analog output and...
Read More »Sensor Box Line is available in 3- or 4-pole versions.
SAI line includes fieldbus active components for Profibus DP, ASI Interface, and CAN Open. Features include bus and power connections through cable glands or metric M23 and M12 (coded B, PB) connections. Distributor base module is available as 4- or 8-channel M12 unit with IP68 or NEMA 6P rating or with IDC quick-fit technology for IP67 or NEMA 6 rating. M12 technology is available as 4- or...
Read More »Oxygen Controller handles gas streams.
EOC Extractive Oxygen Controller measures and controls oxygen concentrations at ppm levels, in normal or highly acidic environments, such as gas streams. Because sensor element is modular, system has long service life. Replacement of core sensing element is less than 1/3 cost of new probe. Installation requires two simple steps: attach power and piping. It is highly reliable, provides...
Read More »Current Transducer offers closed loop control.
DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...
Read More »Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »