Leak Detector measures over 20 different gases.
Model 501AK pinpoints leaks of all combustible and many non-combustible toxic gases. Sensitivities of some gases are as low as 1 ppm. Unit features 3-position sensitivity switch, as well as audible alarm and battery test circuit. It uses four 1.5 V alkaline batteries and is supplied with carrying case. Three foot sensor extension is available for getting into hard-to-reach places.
Read More »Ammonia Gas Detectors have audible and visual alarms.
Designed to measure ammonia gas on continuous monitoring basis, multipurpose detectors employ explosion-proof sensor elements rated for Class I Division I, Group A-B-C-D hazardous atmospheres. Wall-mount Model 51A26 has 0-1,000 ppm range; wall-mount Model 51A40 comes with remote probe that is reliable up to 1,000 ft from controller; and portable Model 51A45 has 0-1,000 ppm range. All units...
Read More »Transmitter is suited for atmosphere heat treaters.
Suited for users of carbon sensors, CarbonSender DIN-rail transmitter provides raw signal processing, oxygen and temperature re-transmit (4-20 mA), and intelligent probe diagnostics. It also provides burn-off functions, as well as RS-485 communications with ModBus protocol. Module insures integrity of sensor signals over extended cable runs and is applicable to any installation that employs PLC...
Read More »Pressure Transducer offers several connector options.
Series MBS 2100 provides backward compatibility with existing wiring harnesses. Lock-in tab ensures positive, fast, and easy connection. Series covers pressures from -14.5 to 8700 psi. Transducer is available with DIN 43650, shielded cable, bayonet, Packard, and other electrical connectors. Applications include hydraulic systems, boilers, pumps, marine engines and systems, gas transmission,...
Read More »No Pencils Required: From Thinking to Knowing Through Mobility
This ebook provides a detailed guide on how mobility and digital data management systems (DDMS) can increase your company's overall effectiveness and efficiency.
Read More »Image Sensor is designed for mobile handset market.
Based on 1/3 in. optical format, 1.3 megapixel MT9M011 sensor delivers low-light (sub-lux) performance and utilizes low-noise DigitalClarity technology to enable capture of color images. Features include programmable gain and exposure control and black-level calibration. It has frame rate of up to 30 fps at 50 mW along with image decimation to any size while sustaining smooth, continuous motion.
Read More »Liquid Level Sensors utilize displacer technology.
FisherÃ-® Types DL3 and L3 are wafer-bodied products that allow direct, top mounting onto vessel, or mounting between flanges of user-supplied fabricated cages. Available in 3 or 4 in. sizes, wafer body fits Class 150-600 raised-face flange connections. Both units sense level of liquid, level of interface between 2 liquids, or density of liquid in vessel using displacer technology. Model L3...
Read More »CMOS Image Sensors target mobile camera market.
DigitalClarity(TM) mobile VGA Sensors provide high image quality down to sub lux illumination levels. System-on-chip Model MT9V111 includes programmable image processor that performs auto exposure, white balance, color recovery and correction, sharpening, lens shading, and defect correction. Stand-alone Model MT9V011 outputs progressive-scan images at up to 30 fps. Both are suited for camera...
Read More »Pressure Transducers are useful in oil well logging tools.
Measuring 0.75 in. dia, OMEGADYNEÃ-® Series PX3400 features pressure ranges up to 20,000 psi. Model PX3425 operates to 250Ã-
Read More »Incremental Rotary Encoders operate in extreme conditions.
Series ROD 400 and ERN 400 handle vibrations up to 300 m/sÃ-² and shock loads up to 2,000 m/sÃ-². Universal cable exit can be configured for axial or radial applications. Clamping mechanism for blind hollow shaft or through-shaft facilitates mounting by utilizing 3-point clamping ring that prohibits damage to mating shaft.
Read More »Pressure Transducer suits industrial applications.
Built with 303 stainless steel housing, shock- and vibration-resistant P265 sensor incorporates mixed-signal CMOS ASIC and ceramic diaphragm assembly that withstands exposure to various compatible liquid and gaseous media. It suits pressure measurements of 0-15 to 0-1,000 psi, is excited by 5 Vdc, and provides linear amplified output of 0.5-4.5 Vdc, proportional to pressure. Features include...
Read More »560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance
EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.
Read More »