Sensors Monitors & Transducers

Sensors Monitors & Transducers

MEMS Capacitive Accelerometers come with 0.5V to 4.5V single ended output.

Jun 07, 2017

Operated with +8 to +32 VDC power, MEMS Capacitive Accelerometers are available with single axis connection (2220, 2240 and 2276 models) or triaxial connections (2470, 2480 and 2476 models). Designed with full-scale standard ranges from ±2 g to ±400 g, units support up to 2000 ft of cable. Featuring aluminum housing (2220, 2470, 2276 and 2476) and hermetically sealed titanium housings (2240... Read More

Sensors Monitors & Transducers

Fabry-Perot Optical Accelerometers can be chained on single HYPERION channel.

Jun 07, 2017

Available in os7510 (long-term civil infrastructure measurements) and os7520 (lower frequency range, near seismic events) configurations, os7500 Fabry-Perot Optical Accelerometers are suitable for monitoring and security applications as optical sensors. Featuring small footprint, sensors can be used in series on single optical fiber. Units can be integrated into systems with strain,... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

LightOWL Passive Infrared Sensor uses IntelliDAPT technology.

Jun 05, 2017

Featuring integrated lens guards, LightOWL LOIRWVRP-LWO Passive Infrared Sensor comes with relay and photocell control options. Analyzing coverage area of 1,600 sq ft, unit is operated from -40 °F to 149 °F temperature range. Providing automatic digital adjustments to sensitivity and timer settings, product offers voltage of 24 Vdc. Device comes with five-year limited warranty and is NEMA 4X... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

EX1401 Measuring Instrument is embedded with EXLab Express software.

Jun 05, 2017

Offering ±0.20°C accuracy, EX1401 Thermocouple and Voltage Measurement Instrument is designed with 1000 V channel-channel isolation and 500V channel-ground isolation. Suitable for automotive, battery testing, HALT/HASS and health monitoring applications, unit delivers a sampling rate of 20K samples/second/channel. Featuring PoE+ and LXI Ethernet interfaces, product comes with built-in... Read More

Sensors Monitors & Transducers, Welding Equipment & Supplies

Keep an Eye on Your Critical Welds

Jun 03, 2017

Weld Purging is the act of removing oxygen from the vicinity of a weld before, during and after welding metals such as stainless steel, titanium, zirconium and nickel alloys. Without Weld Purging, the weld would be left oxidised and discoloured, which could then lead to loss of corrosion resistance and metallurgical imperfections.

In order to accurately read the residual oxygen level... Read More

Sensors Monitors & Transducers

SmartBlinky Pro Battery Watering Monitor comes with smart sensing technology.

Jun 03, 2017

Used for monitoring electrolyte levels in battery, SmartBlinky Pro™ Battery Watering Monitor eliminates frequent checking of electrolyte levels. Featuring universal voltage and polarity for easy installation, unit comes with SmartMOUNT, SmartBEEP and SmartDELAY features. System provides audible alarm when electrolyte levels are low to alert personnel. SmartDELAY function optimizes battery... Read More

Sensors Monitors & Transducers

Thickness Gage Transducers are housed in stainless casing.

Jun 02, 2017

Compatible with 27MG, 45MG and 38DL PLUS® thickness gages, 10 MHz Thickness Gage Transducers are available with straight (D7912) or right angle (D7913) integral cables. Units are suitable for small diameter and thin material thickness measurement applications.

Read More

Sensors Monitors & Transducers

ASUH-I Miniature Pressure Sensor weighs 0.5 oz.

Jun 02, 2017

Made of stainless steel, ASUH-I Miniature Pressure Sensor is operated from -65 to +300ºF temperature range and vibration level greater than 20 g.Featuring 0.5 to 4.5Vdc option, unit offers pressure range of 0-70 psi through 0-6000 psi in absolute or sealed gauge. Compatible with process and electrical connectors, product is suitable for development, prototype and production testing... Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors Monitors & Transducers, Test & Measuring Instruments

Pressure and Temperature Transmitters offer 4-20 mA output.

Jun 02, 2017

Integrated with PT1000 measuring element, ATM.1ST/T Pressure and Temperature Transmitters provide up to 15,000psi of pressure range with accuracy of <±0.1% FS or <±0.25% FS. Operated from -58° to 300°F temperature range, units come with piezoresistive silicon sensor technology. Product is suitable for machine installations, industrial process monitoring and control, heating and ventilation... Read More

Sensors Monitors & Transducers

Industrial Scientific Receives ANZEx Approval for Ventis Pro Series Multi-Gas Monitors

Jun 01, 2017

Ventis Pro Series gas monitors meet the requirements for use in hazardous environments in Australia.

PITTSBURGH, PA - 31 January 2017 - Industrial Scientific, the global leader in gas detection, is pleased to announce that Ventis™ Pro Series Multi-Gas Monitors have received ANZEx certification. This certification applies to the use of Ventis Pro Series instruments in hazardous... Read More

Sensors Monitors & Transducers

Industrial Scientific Receives MSHA Approval for Ventis Pro Series Multi-Gas Monitors

Jun 01, 2017

The Ventis Pro Series meets all requirements for use in underground mining.

PITTSBURGH, PA - 1 December 2016 - Industrial Scientific, the global leader in gas detection, is pleased to announce that Ventis™ Pro Series Multi-Gas Monitors have been approved by the Mine Safety and Health Administration (MSHA) for use in underground mines in the United States. All Ventis Pro Series... Read More

Sensors Monitors & Transducers

Tango TX1 Gas Detector features H₂S sensors.

Jun 01, 2017

Tango™ TX1 Gas Detector is equipped with sensors that measure up to 0 to 500 ppm with accuracy and response times. Unit provides gas alerts when gas concentration exceeds acknowledgeable gas alert setpoint.

Read More

Sensors Monitors & Transducers

Ventis Pro Series Gas Monitors are embedded with firmware version 2.1.

Jun 01, 2017

Offering additional sensor and language options, Ventis™ Pro Series Gas Monitors come with dual-range methane IR sensor, phosphine sensor and long-life oxygen sensor. Suitable for use in inert atmospheres, seal checks and leak detection, unit’s methane IR sensor offers resolution of 0.01% and 0.1% from 0-5% and 5-100% volumes respectively.

Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Keysight Technologies to Help RDA Microelectronics Accelerate NB-IoT Chipset Tests

Jun 01, 2017

Chipset, module and device makers can verify and improve RF performance with Keysight’s test solution

Highlights:

  • Keysight’s NB-IoT RF performance test solution evaluates and optimizes NB-IoT designs
  • Keysight’s NB-IoT RF performance test solution, which is based on the E7515A UXM wireless test set, was selected by RDA to support its NB-IoT RF performance test... Read More

HVAC, Sensors Monitors & Transducers

Sensible Level and Flow Sensor Solutions

May 26, 2017

80 GHz Non-Contact Radar Made Better by BinMaster

Get the awesome performance of 80 GHz radar and the options you need to simplify installation. BinMaster offers mounting plates, swiveling holders, and a variety of flanges to eliminate extra fabrication. There's wireless options to reduce costs and running long spans of wire. Local display consoles for data access from the ground or... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

DVEO's Packet Recovery Enabled Encoder and Decoder Shortlisted for SCTE Technological Innovation Awards

May 26, 2017

DOZER™ Enabled Systems Reliably Deliver Error-Free Video Over Very Long Distances

San Diego, California - DVEO®, a well respected supplier to leading telco TV/OTT and cable operators around the world, announced today that their two channel encoder/decoder pair with "DOZER™" UDP packet recovery protocol extension has been shortlisted for the SCTE 2017 Technological Innovation... Read More

Automatic ID, Sensors Monitors & Transducers

Microscan Unveils Technology Advancements Helping Manufacturers Comply with GS1 Standards at GS1 Connect Conference

May 26, 2017

Microscan will present barcode verification and print quality inspection product capabilities helping manufacturers and retailers comply with GS1 Standards at the GS1 Connect Conference in Las Vegas, NV. New LVS® product advancements as well as time-proven solutions to be featured at the conference make Microscan a one-stop technology partner for the companies willing to ensure they are GS1... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

POSITILT PTK29 Inclination Sensor features digital and analog outputs.

May 25, 2017

Measuring inclination between ± 180° with 1 axis or ± 60° with 2 axes, POSITILT® PTK29 Inclination Sensor is shielded against electromagnetic disturbances. Offering static linearity up to 0.05°, unit is housed in hermetically sealed stainless steel package. Enabling to operate in areas of high shock and vibration, product operates in temperature range from -40°C to +85°C. Sensor uses... Read More

Sensors Monitors & Transducers

Superiors Speed Sensors are fitted for CEMA C and D idlers.

May 24, 2017

Available for belt widths ranging from 24-72 in., Superior’s Speed Sensors are used for monitoring speed of a conveyor belt. Enabling operators to control conveyor shutdowns, monitor belt slippage and trigger warning systems, units produce electronic pulses that are interpreted by PLCs. Sensors can be mounted on return roll, clean side roll and troughing wing roll.

Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Temperature/Humidity Sensor comes with touch-sensitive mode button.

May 24, 2017

Featuring three-digit, seven-segment display with °F, °C and % indicators and character height of 0.39 in., Temperature/Humidity Sensor with 69 x 38 x 108 mm dimensions is wall mountable. Supporting applications from -4 to 140°F temperature range and 0 to 90% relative humidity, unit comes with touch sensitive LED light button. CAT5/5e/6/6a cable of 305 m can be connected between the sensor... Read More