Encoder Products utilize laser interferometry.
NanoGrid Model A has electronic interpolation to 0.3 Nm on ISA-bus compatible PC board with either 32-bit digital position word or optional A-quad-B format output. It delivers repeatability of better than ±5 Nm and has high speed capability of 700 Nm/sec. Model B produces selectable A-quad-B outputs to 20 Nm resolution using ASICs on small printed circuit board, with speed capability up to...
Read More »System provides non-contact temperature measurement.
Series IM/IMS combines IM Panel Meter with IMS IR Sensor to form complete monitoring system. IM 1/8 DIN panel meter displays temperature from 0 to 1000°F (-18 to 538°C) on 4-digit LED. It provides user-defined 4-20 mA or thermocouple output as well as adjustable dual setpoints and deadband alarm outputs. Infrared Sensors are available with distance-to-target ratio (35:1) or close...
Read More »
Ultrasonic Transmitter avoids false alarms.
Model MSP422 non-contact, liquid level transmitter provides liquid height measurement and/or measurement of distance to liquid. Housed in nylon casing sealed to IP66/67, it features inert plastic wet-sides. Set-up and commissioning are completed using its 3-key pad and LCD positioned inside lid. MSP422 has built-in false target recognition and rejection features, and can be programmed to ignore...
Read More »
Rotary Torque Sensor measures torque up to 737 ft.-PD.
TM-HA non-contact rotary torque, Embedded Magnetic Domain (EMD) sensor can measure torque applied to rotating or stationary shafts. It provides torque values at high frequency with high resolution, repeatability and accuracy. Resistant to corrosion and magnetic fields, TM-HA is packaged in 1 housing with torque shaft, signal detector, electronic signal processing unit, connector and cable.
Read More »
Pressure Sensor Selection Guide
This white paper provides information and a guideline for pressure sensor selection.
Read More »
Electromagnetic Field Sensor has 4% accuracy.
Single-axis, hand-held Electromagnetic Field Sensor features high resolution measurement and is designed to measure field radiation at different band widths. LED display reads 0.1 to 199.9 mG over the ELF range of 30 to 400 Hz. Accuracy is rated to within 4% ±3 digits at 50/60 Hz. Samples are taken every 4 seconds. Unit is powered by one 9 V battery.
Read More »
Vibration Monitors are self-contained.
Model 1900/15 and Model 1900/17 Vibration Monitors offer users radial vibration measurement capabilities via proximity probes. Model 1900/15 can accept inputs from either 3300 XL 8 mm or 3300 XL NSvTM proximity transducer systems, and provides 2 levels of alarm: ALERT and DANGER. LCD display provides local indication of vibration amplitude. Model 1900/17, identical to 1900/15, has 4 to 20 mA...
Read More »
Flue Gas Analyzer checks oxygen and carbon monoxide.
Portable Model 360 measures oxygen and CO present in flue gas sample. It uses customer replaceable sensors, which have life expectancy of 2-3 years. Analyzer is complete with built-in sample pump, 12 ft of sample hose, filter/condensate trap, flowmeter, rechargeable gel cell battery, LCD digital readouts, and temperature sensor. It indicates stack temperature for fuel efficiency calculations....
Read More »
Pressure Transmitter features low pressure resolution.
LPN-DP Differential Pressure Transmitter is designed with fine and coarse zero and span adjustment, temperature compensation, IP67 enclosure, selectable 5-sec dampening and reverse polarity protection. Solid state device can be used in non-corrosive, non-ionic working fluids that are compatible with plastic, aluminum, RTV, silicon and glass. Applications include analytical instruments, liquid...
Read More »
Proximity Sensors ignore ferrous materials.
NF Series non-ferrous barrel style proximity sensors are used in applications where non-ferrous targets need to be sensed and ferrous material needs to be ignored. Stoneface(TM) front face is made of thermoset plastic developed for resistance to weld slag, scratching, pitting and abrasion. Sensors are available in 12 mm, 18 mm and 30 mm dia bodies with NPN (sinking) or PNP (sourcing) normally...
Read More »
Monitor detects corrosive conditions.
ECM(TM) (Environmental Conditions Monitor) measures humidity, temperature and corrosive attack on 2 replaceable sensors and shows rate of corrosion on indicator lights corresponding to ISA classification of environments for copper and silver. It supports both analog and digital outputs of information and provides remote alarming, display and recording. Information can be stored via on-board...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
