Sensors Monitors & Transducers

Sensors Monitors & Transducers, Test & Measuring Instruments

Pressure Transducer has overload capacity to 150% F.S.

Mar 15, 2002

Subminiature Model S(H) pressure transducer operates at temperatures up to 400 deg F. Its 0.375 in. dia flush sensing diaphragm makes unit suitable for industrial process control applications. Construction consists of unitized all welded 17-4 PH stainless steel diaphragm and 7/16-20 UNF threaded housing. Unit is available in pressure ranges from 0-150 to 0-10,000 psig (gage pressure) or psia... Read More

Sensors Monitors & Transducers

Miniature Accelerometers have lightweight titanium housings.

Mar 15, 2002

ICP(R) accelerometers are suited for modal and structural vibration analysis, package drop testing, and general shock and vibration measurement applications. Models 352C41 (10 mV/g) and 352C42 (100 mV/g) are each packaged in 3/8 x 0.38 in. housing with smooth base for adhesive mounting. Shear mode, piezo-ceramic sensing elements work over frequency range of 0.5-10kHz. Both accelerometers have... Read More

Sensors Monitors & Transducers

Portable Infrared Analyzer measures thickness of nylon layers.

Mar 15, 2002

Infracal Filtometer Model CH-2 makes direct thickness measurements of nylon layer in plastic films. Sample of film is put into standard card holder and placed into analyzer. Complete analysis takes less than 1 min, eliminates use of hazardous solvents, and resulting measurement data correlates directly to gravimetric values. Analyzer has filter/detector for wavelength unique to nylon, allowing... Read More

Material Handling & Storage, Sensors Monitors & Transducers

Frame Sensor detects parts passing through.

Mar 14, 2002

FRS and CAD frame sensors detect part passing thru or dwelling in detection area. Sensors with areas up to 200 x 250 mm can detect parts as small as 4 mm dia. Smaller sensors detect parts down to 2 mm dia. Sensing devices are enclosed in aluminum, industrial housing. Response time is 1 msec and outputs are NPN, PNP, normally open, and normally closed. Power requirement is 24Vdc. On board... Read More

Sensors Monitors & Transducers

Emissions Monitor processes data according to EPA regulations.

Mar 14, 2002

MicroCEM(TM) continuous emissions monitoring system comes in 2 compact, field-mountable weather-resistant NEMA 4X rated enclosures. It measures oxygen, carbon monoxide and NOx using paramagnetic, NDIR and chemiluminescent technologies. Built-in data acquisition and handling system (DAHS) stores relevant raw and diluent corrected emissions data, status information, calibrations and alarms for... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Pressure Sensors meet 3A, FDA and EHEDG specs.

Mar 14, 2002

PL2, PM2, PF2 and P12 sanitary sensors monitor pressure in food, beverage, dairy, and pharmaceutical applications. Sensor housings are 316 stainless steel and accept variety of sanitary fittings, including 1 1/2 and 2 in. Tri-Clamp fittings. All are 2-wire transmitters with scaleable 4-20mA or 0-l0V analog output that is accurate to 0.6% of range with repeatability of 0.1 %. Models are available... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Measuring Wheels work with encoders to measure linear motion.

Mar 12, 2002

Measuring Wheels are available in 6 in., 12 in., 1/3 meter, 200mm, 300mm, 400mm, and 500mm with choice of rubber or knurled aluminum contact surfaces. Cube Series Accu-Coder(TM) encoders with dual shafts work well in measuring wheel applications, since putting measuring wheel on each shaft results in twice the traction and improves bearing load by leveling radial pressure. Read More

Sensors Monitors & Transducers

Proximity Sensor detects tiny objects 2 in. away.

Mar 12, 2002

Extended range 12mm ultrasonic SUPERPROX(R) Model SM300 Series detects all materials at distances from as close as 0.25 in. to as far as 2.00 in. from sensor face. At such distances, sensor is safely out of harm's way. It detects objects as small as 0.098 in. dia rod or 0.039 in. wide flat bar. Operating on 12 to 24 Vdc, sensor is equipped with both sinking (NPN) and sourcing (PNP) outputs. Read More

Electronic Components & Devices, Sensors Monitors & Transducers, Test & Measuring Instruments

Electronic Module cleans up encoder signals.

Mar 12, 2002

Anti-Dither Module can be placed between encoder and receiving electronics. DIN rail mountable device compares quadrature outputs from encoder, removes errors caused by mechanical vibration, and gives true picture of system output. Applications include web processes, conveyors, in-line inspection stations, and heavy equipment. Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

pH/ORP Sensors use differential electrode technology.

Mar 12, 2002

pHD(TM) electrode sensors use 3 measuring electrodes. Process and reference electrodes measure pH differentially, with respect to third ground electrode, reducing reference junction fouling and minimizing ground loops. Preamplifier boosts electrodes' mV signals for transmission up to 3,000 ft. PEEK(R) and Ryton(R) bodies provide chemical resistance in aggressive process solutions. Convertible,... Read More

Sensors Monitors & Transducers

Vibration Monitor offers alarm and shutdown outputs.

Mar 12, 2002

Model 8812 K-Guard vibration level monitor and switch allows for external 100 mV/g accelerometer to be remotely located from signal processing module. Housed in NEMA-4X (IP65) enclosure, it provides field set point range of 0.08 to 2 in./sec, velocity peak range of 4 in./sec, and frequency range of 10 to 1000 Hz. Partnered with a piezoelectronic sensor, 8812 operates on 18 to 30 Vdc supply... Read More

Sensors Monitors & Transducers

Position Transducer measures up to 4 in. of travel.

Mar 12, 2002

Model 174-0321T subminiature position transducer uses stainless steel cable wound around stainless steel drum. Bearing-mounted drum is mated to potentiometric element that translates linear position information to electrical signal. Transducer monitors cable acceleration in excess of 50 g's, and features 5K ohm co-molded conductive plastic potentiometric elements. It has operating temperature of... Read More

Sensors Monitors & Transducers

Capacitive Sensor measures liquid level through foam.

Mar 12, 2002

Self-compensating proximity sensor for non-flush liquid level sensing applications, can be placed within tank, making contact with liquid, or thru tank wall of plastic, fiberglass or sight glass window. It eliminates false detection of foaming materials and filming/coating on inside walls of tank. It is IP 67 rated, CE approved, short circuit protected, overload protected, with temperature rating... Read More

Optics & Photonics, Sensors Monitors & Transducers, Test & Measuring Instruments

Rotary Encoder suits tight constraint applications.

Mar 12, 2002

MOD 700 is comprised of LED and OptoASIC configured into small caliper, offering resolutions as high as 2,540 PPR. Opto-ASIC phased array photo diode IC features high tolerance for axial movement (+/- 0.010 in.) and power consumption of 40 mA. Standard stainless steel code disk offers range of standard optical radii, from .375 to .860 in. MOD 700 can be surface mounted onto PCBs or installed onto... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Pressure Transmitter measures vacuum.

Mar 11, 2002

NIST-traceable Model FPV provides vacuum pressure measurements from 10 in. water to 15 psiv. Selectable parameters include choice of 0.1% or 0.25% accuracy, 6 electrical terminations, 6 pressure ports, and 0-5 Vdc, 0-10 Vdc, 2-wire 4-20 mA, or mV/V output. Long-term stability is 0.04% FS for 30 months. Certifications are available for CE and for intrinsically-safe installations. Read More

Sensors Monitors & Transducers

Analog Laser Sensor has 2 m range.

Mar 08, 2002

Powered by 18-30 Vdc, Model BOD-66M analog laser sensor allows continuous measurement of parameters such as distance, height, and length. Analog and digital outputs provide flexibility for industrial automation, and teachable setpoint provides discrete digital PNP output when target reaches set distance. Sensing range is from 200 mm to 2 m with resolutions of <5 mm. Aluminum housing is sealed to... Read More

Mechanical Power Transmission, Optics & Photonics, Sensors Monitors & Transducers, Test & Measuring Instruments

Linear Actuator is available with encoder.

Mar 08, 2002

Size 17 hybrid linear actuator, with optical incremental encoder, is suitable for both high and low volume motion control applications. Encoder is offered in resolutions ranging from 50 to 1,024 counts, and is available with TTL level and quadrature outputs. It incorporates lensed LED light source and monolithic photodetector array with signal shaping electronics to produce 2-channel bounceless... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Circuit Monitor provides power system surveys.

Mar 08, 2002

POWERLOGIC Series 4000 has sealed case design, allowing it to be transported to various locations within facility. Portable unit is suitable for temporary monitoring, or where existing switchgear will not accommodate permanent installation of circuit monitors. Base unit includes detachable display and necessary cables. Upgrade option adds high-speed transient-detection. Optional Ethernet... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Linear Encoder is accurate over 100 mm stroke.

Mar 06, 2002

Long Stroke encoder has accuracy better than 1 micron with resolution of 0.05 micron. Signals from probe interface electronics are digital and easy to interface with PC/PLC or digital readouts. Unit is CE marked comes with calibration certificate in mm or inches. Applications include industrial and scientific tasks. Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Encoder/Resolvers provide range of output types.

Mar 06, 2002

Snaptrak Series absolute encoder/resolvers are shaft angle position sensors that provide BCD, Binary, Greycode, Incremental, +5V TTL or 24 Volt Logic type outputs. DC Snaptrak Series provides +/-10 Vdc, 0-10 and 4-20 mA current loop outputs proportionate to absolute shaft angle. Encoder/resolvers are available in heavy duty NEMA 12 and flange mounted versions. Six wire cable is over 1000 ft long... Read More