Quick Release Pins are protected from accidental triggering.
Offered in 2- or 4-ball design, LG Series DZUSÃ-® LockwellÃ-® pins feature Y-handle design and cupped recess to protect against accidental triggering of pushbutton pin release. Flared handle also provides grip for pin insertion or removal. Vibration-resistance helps maintain positive grip of pin in installed position while single-acting pin design facilitates tool-free insertion or...
Read More »
Ball Lock Pins offer secure hold and quick release feature.
Quick Release Ball Lock Pins are suited for fastening and locating applications that require positive, secure holding and can utilize tool-less removal convenience provided by ball-lock technology. Offered in 600+ configurations, products come with shank diameters that encompass 3/16, Ã-¼, 5/16, 3/8, and Ã-½ in. sizes, with Ã-½-6 in. grip lengths. There are 4 styles of handles and 3...
Read More »Lifting Pins feature quick-connect design.
Constructed with 17-4 PH stainless steel forged lifting ring, stainless steel Kwik-Lok(TM) Lifting Pins combine positive-locking pin, push button release design with 5:1 strength factor. Products accommodate range of lifting hooks or hardware, and load spreader bar on each ring helps prevent accidental actuation. Inch sizes offer pin diameters from Ã-¼-5/8 in., grip lengths from 0.5-3.00 in.,...
Read More »
Positive Locking Pins offer alternative to detent pins.
QUEST(TM) Series Kwik-Lok(TM) Positive Locking Pins feature 303 stainless steel body and recessed button with polycarbonate resin handle for impact, low temperature, and chemical resistance. Suited for commercial use in OEM and consumer products, units offer nominal pin diameters from 3/16-1 in. or 5-25 mm with -½-6 in. or 10-100 mm grip lengths.
Read More »
Air Amplifiers and How They Work
Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.
Read More »
Threaded Detent Pins are held by spring force.
Solid alignment pins have ground shank and threaded end for knob handle, and locking balls hold pin in place by spring force. Knob handles can be permanently secured with thread-locking adhesive. Available in stainless steel, products come in standard shank diameters from 3/16-Ã-½ in. and various grip lengths. Products require users to push to insert and pull to remove.
Read More »
Side Thrust Pins are available in metric sizes.
By pressing pin body into proper bore size and depth, Side Thrust Pins hold, position, or clamp workpieces. Four versions are available: single sided with stainless steel ball and stainless steel spring, single sided with plastic ball and stainless steel spring, single sided with black oxide finish steel ball and elasticized plastic spring, and double sided with black oxide finish steel ball and...
Read More »
Side Thrust Pins and Bushings come in metric sizes.
Suitable for holding, positioning, and clamping of workpieces, Side Thrust Pins feature knurled aluminum body that requires hole tolerance of H8. Available in light, standard, or heavy-duty end pressures, pins are zinc-plated hardened steel or Delrin plastic. Versions with NBR/perbunan rubber seal are gold-passivated and those without seal are silver-passivated. Made of steel with black oxide...
Read More »
Press Fit Side Thrust Pins are tapped without pin.
Used in holding, positioning, and clamping of workpieces, Press Fit Side Thrust Assemblies have knurled body with aluminum, gold passivated finish. They require bore of H8 tolerance. While various sized assemblies are available in light-, standard-, or heavy-duty end pressures, all incorporate steel thrust plate hardened with black oxide finish and seals of NBR/perbunan rubber. User can design...
Read More »
Side Thrust Pin features threaded body.
Spring-loaded Side Thrust Pin has elements for holding, positioning, and clamping of workpieces. Protruding height can be adjusted with threaded body. Made of steel, thrust pin is zinc-plated and hardened. Version with seal has yellow finish, while unit without seal has blue passivated finish.
Read More »
Detent Pins meet or exceed Mil-P-45952/1.
Kwik-Lok(TM) Heavy Duty Detent Pins are shoulder-style alignment pins for applications that do not require positive locking ball. Heavy-duty spring and 2 spring-loaded stainless steel balls provide high pullout force. Available in stainless steel and alloy steel, units range from 3/16-1 in. and 5-25 mm. Ring is included for attachment of optional lanyard.
Read More »
Let Our Safety Experts Lower Your Risk
Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.
Read More »
