Sealants

Black Aerosol Foam comes in seamless, leak-proof can.
Sealants

Black Aerosol Foam comes in seamless, leak-proof can.

SuperSeal® Duct Butter's aerosol can will not leak or corrode, increasing its shelf life and stability. Product retains its shape and volume after curing is completed, resulting in improved finished appearance. Used for spot and edge repair of ductboard or liner, it can also be used to seal gaps between liner sections or fittings. SuperSeal maintains thermal integrity of insulation it is...

Read More »
Threadlocker/Sealant replaces lockwashers.
Threadlockers

Threadlocker/Sealant replaces lockwashers.

PERMABOND® HH120 seals fasteners against water and chemicals. It obtains fixture strength in 15-20 min on active metals such as iron, steel, nickel, and aluminum. Viscosity is 7000 cp, allowing for gap filling up to 10 mil. HH120 features locking strength of 250-350 lb-in. and retaining strength of over 2000 psi. It is suitable for locking bolts, nuts, and screws for permanent assembly, and...

Read More »
Sealants

Sealant penetrates porosity in powder metals.

Loctite® PM 5120 plating grade sealant is intended for shallow penetration to seal against low pressure plating operations. Durable enough to resist strong acids and bases at low temperatures, sealant is formulated for controlled cure at room temperature on active metal substrates to avoid bleed out. Fluorescent dye facilitates cross-sectional inspection. Loctite PM 5120 is easy to recover...

Read More »
Adhesive/Sealant has service range of -75 to 500°F.
Adhesives

Adhesive/Sealant has service range of -75 to 500°F.

Polymer System X5HT one component, contact type adhesive/sealant offers dimensional stability and creep- and chemical-resistance. Curing process requires application to each substrate, application of pressure (less than 50 psi), and curing at 300 to 400°F for 15 to 30 min in vented oven. X5HT adheres to metals, polymers, composites, glass, and ceramics. Lap shear strength values range from...

Read More »
Sealant is suitable for construction market.
Sealants

Sealant is suitable for construction market.

Available in gun-grade cartridges and sausage packs, Chem-Calk® 2000 one-Part, solvent-free, multi-function sealant has 30 minute skin time. Its cures at 77°F with 50% relative humidity to 1/4 in. thickness in 24 to 36 hours. After 14 days of full cure, it provides resistance to ozone, ultra-violet light exposure, heat, and aging. Product offers tensile strength of 260 psi, modulus...

Read More »
Ceramic Coating seals thermal spray coatings.
Coatings

Ceramic Coating seals thermal spray coatings.

Ceramacoat(TM) 503-VFG-S ceramic-based sealant is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically resistant, inorganic material does not outgas or decompose in high temperature corrosive applications to 3200°F. Applied using sponge brush or pneumatic spray equipment, full cure is achieved after exposure for 1-2 hours at 700°F. It sinters and...

Read More »
Caulks and Sealants provide concrete and mortar repair.
Caulk

Caulks and Sealants provide concrete and mortar repair.

Polyurethane Concrete Repair is paintable sealant for joints up to 1 in. wide. It is appropriate for indoor or outdoor applications. Concrete and Mortar Repair is silicone sealant that is suitable for joints and cracks and prevents ice and water damage. Concrete Driveway Repair is latex caulk with resistance to wear. It remains flexible to prevent damage by ice and water. Mortar Patch watertight...

Read More »
Epoxy Resin System offers chemical resistance.
Resins

Epoxy Resin System offers chemical resistance.

Two-component EP41S-2 epoxy adhesive/sealant and coating cures at ambient temperatures or more quickly at elevated temperatures. It is 100% reactive and contains no solvents or diluents. EP41S-2 adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. It withstands prolonged immersion in strong organic solvents. Operating temperature range is -60 to +275°F.

Read More »
Coating System prevents floor erosion.
Coatings

Coating System prevents floor erosion.

Tigerguard(TM) coating system provides high mil barrier on floors that need to stand up harsh conditions. It offers durable surface that is easy to clean and maintain, and adds high gloss shine to work environments. It also provides superior gloss retention, fills in surface defects, and resists mars, scratches, abrasion, chemicals, and impact. Tigerguard system requires no special skills for...

Read More »
Encapsulants

Plastics Adhesive cures with heat or visible/UV light.

OPTOCAST AC-3801 one-component electronic grade, acrylate based formulation is room temperature stable and free radically initiated. Adhesive/sealant/encapsulant will adhere to polymeric and ceramic substrates when polymerized to flexible solid upon exposure to heat or UV and/or visible light in 320-520 nm range. Cured adhesive offers Shore D hardness of 40 to 45 and temperature range of -40 to...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics