Sealants

Epoxy Adhesive/Sealant resists temperatures up to 600°F.
Epoxies

Epoxy Adhesive/Sealant resists temperatures up to 600°F.

One-component, heat-curing, EP17 offers service operating range of -300 to +600°F and cures in 60-90 min at 300-350°F. Product bonds to metals, glass, ceramics, vulcanized rubbers, and plastics. Chemical-resistant EP17 has Shore D hardness greater than 90, compressive strength greater than 13,000 psi, and tensile strength of 8,700 psi. Flowable paste is 100% reactive, does not contain...

Read More »
Liquid Sealing Compound protects decorative concrete.
Sealants

Liquid Sealing Compound protects decorative concrete.

Non-yellowing, acrylic-based DECRA-SEAL offers resistance to water, alkalis, mild acids, and petroleum spirits. Transparent product seals and protects decorative colored concrete by producing hard, yet flexible, clear film. DECRA-SEAL meets max VOC content limits of 700 g/L for concrete sealing compounds as required by U.S. EPA Architectural Coatings Rule. It is suited for driveways, patios,...

Read More »
Acrylic Sealant fills and waterproofs cracks.
Sealants

Acrylic Sealant fills and waterproofs cracks.

Pourable, self-leveling CON-CRAX® repairs concrete damage and remains flexible to resist cracking during seasonal weather changes. It requires no mixing or troweling and dries quickly to form watertight seal. Product's color blends with surrounding concrete, making it suited for driveways, sidewalks, parking lots, or stairs. It can be squeezed into cracks up to Â-½ in. wide and 1 in....

Read More »
Adhesives

Adhesive and Sealants suit commercial applications.

QUIKRETE® Polyurethane Self-Leveling Sealant is non-staining and has virtually no shrinkage. Permanently flexible, polymeric, multi-purpose sealant is suited for horizontal joints and cracks. Offering abrasion and tear resistance, QUIKRETE® Polyurethane Non-Sag Sealant is suited for sealing vertical and overhead joints. QUIKRETE® Polyurethane Construction Adhesive is a...

Read More »
Single-Component Roof Sealant is moisture-reactive.
Adhesives

Single-Component Roof Sealant is moisture-reactive.

Bostik® GPS1 construction-grade sealant, suited for general-purpose sealing of dissimilar substrates, may be used in interior or exterior construction applications. Due to solids content, elastomeric urethane sealant produces seals that will not shrink or become brittle with prolonged exposure to weather extremes or UV rays. Physical properties include 135 psi tensile strength, 550%...

Read More »
Sealants

Automotive Butyl Sealant expands 200% to fill gaps.

BondSeal 0442 consists of synthetic, rubber-based sealant strip that is applied to automotive body areas prior to paint cycle for purposes of gap filling, sealing out liquids, and eliminating unwanted noises. Formulated with blowing agents and curatives, product expands within 5 min of heat exposure in paint bake cycle and fully expands after 20 min at 180°C. It is also available with heat...

Read More »
Flexible Epoxy Sealant is suited for expansion joints.
Sealants

Flexible Epoxy Sealant is suited for expansion joints.

Joint Guard(TM) fills expansion joints with flexible epoxy seal that will not become brittle or break out as sections of floor expand and contract in response to temperature changes. With 100% solids formula, product flexes up to 50% and withstands heavy traffic and chemical contact. Pourable, self-leveling, self-priming, non-shrink sealant prevents contaminants from pooling in joint areas.

Read More »
Adhesive/Sealant suits transportation industry applications.
Adhesives

Adhesive/Sealant suits transportation industry applications.

Bostik® Liquid Rivet 1152 FS, with 300 psi tensile strength, is a one-component, moisture-curing polyurethane formulation that can eliminate need for mechanical fasteners. With minimal VOC and low HAP content, product is compliant with CARB and SCAQMD California air quality emissions standards. It is tack-free in 30-45 min and fully cures in 24 hr. Recommended for overhead and vertical...

Read More »
Sealants

Insulating Glass Sealant has low moisture permeability.

Available in black, EdgeTherm(TM) PIB-H1 gun grade, 100% solids sealant system is based on polyisobutylene (PIB) polymer formulated to impart reinforcement, resist degradation from UV light and oxidation, and provide low moisture permeability. It resists shearing and retains flexibility through its temperature range to compensate for thermal movement of IG units. Product adheres to glass and...

Read More »
Threadlockers/Sealants are offered in various viscosities.
Threadlockers

Threadlockers/Sealants are offered in various viscosities.

PERMABOND PURE Anaerobic Adhesive/Sealants are single component liquids that cure when in contact with metal parts and oxygen is excluded. They fill gaps between mated parts by curing to hard plastic and locking assembly in place. PERMABOND PURE Threadlocking Adhesives/Sealants cure to cross linked plastic with environmental and temperature resistance. Examples include medium-strength,...

Read More »

All Topics