Sealants

Adhesive/Sealant offers long-term storage capability.
Epoxies

Adhesive/Sealant offers long-term storage capability.

Master Bond Polymer System Supreme 10HTFL is single-component, epoxy resin-based adhesive/sealant with -300 to +300°F service temperature range. Cured to flexible thermoset polymer at temperatures of 250-300°F and above, product does not require refrigeration for extended storage before use. It adheres to metallic and non-metallic substrates, even upon prolonged exposure to hostile...

Read More »
Silicone Polymer Compound cures with UV or RTV.
Coatings

Silicone Polymer Compound cures with UV or RTV.

Formulated to react with UV light and atmospheric humidity, UV71DC is suited for applications involving complex product geometries. Single-component product cures to produce optically clear, flexible, non-yellowing, and chemically resistant adhesive, sealant, or coating. Employed over -80 to +400°F range, compound exhibits thermal shock resistance and adheres to substrates from glass and...

Read More »
Sealants

Acrylic Sealant provides consistent painted finish.

Eliminating changes in sheen of paint when applied over caulk or sealant, GE Infinity urethane elastomeric sealant enables users to deliver seamless look when painting. It provides optimal adhesion and elasticity without dirt pick-up or yellowing. Incorporating BioSeal, cured sealant is resistant to mold and mildew growth. GE Infinity is suited for indoor and outdoor applications and cleans up...

Read More »
Sealant has -300 to 600°F service temperature range.
Epoxies

Sealant has -300 to 600°F service temperature range.

One component, heat curing epoxy adhesive/sealant EP17 cures at temperatures from 300-350°F for 60-90 minutes. Flowable paste has 8,700 psi tensile strength, 387,000 psi tensile modulus, Shore D hardness greater than 90, and compressive strength greater than 13,000 psi. MIL-MMM-A-132 compliant, 100% reactive compound is resistant to chemicals, including fuels and acids, and bonds to metals,...

Read More »
Miscellaneous Materials

OTC-Compliant Products cure and seal concrete.

VOC-compliant in areas affected by Ozone Transport Commission (OTC) regulations, solvent-based A team products cannot freeze, will not settle out, and are not susceptible to bacteria growth. Products included in series are styrenated acrylic sealer; non-yellowing acrylic cure and seal; and high-gloss, non-yellowing sealer. Also included, Silencure-A offers long-term silane protection, while...

Read More »
Refrigeration Sealants seal undetectable or micro leaks.
Sealants

Refrigeration Sealants seal undetectable or micro leaks.

Injected into moisture-free system, Super Seal particle-free formula flows freely without affecting valve cores, driers, compressors, or other components. Once product and refrigerant leak out hole 300 microns or smaller, chemical reaction crystallizes it around hole during exposure to atmospheric moisture and then forms seal. Versions are available for 5 ton systems and larger, residential...

Read More »
Sealants

Sealant suits high-temperature casings and manifolds.

Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty(TM) 950 is used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds up to 950°F. Product is resistant to chemical and steam attack, high pressure and vacuum atmospheres, and mechanical vibration and joint movement. Offered in 11 oz caulk gun...

Read More »
Adhesives

UV-Curable Adhesive/Sealant has flexible formula.

Used for bonding and sealing, UV15X-5 single-component urethane elastomer withstands thermal cycling and mechanical shock. Its formulation exhibits abrasion resistance and forms chemical-resistant bonds between similar and dissimilar substrates. This 100% reactive product, which does not contain any solvents or volatiles, cures in thicknesses greater than 1/8 in. at room temperature upon exposure...

Read More »
Epoxies

Adhesive/Sealant is 2-component, optically clear epoxy.

With 1:1 mix ratio by weight or volume, low-viscosity EP37-3FLF cures at room temperature and bonds to metal, glass, ceramic, rubber, and plastic substrates. Bonds offer resistance to impact, shock, and thermal cycling. Also usable as potting and encapsulation compound, product has service operating temperature range of -80 to +250°F, Shore D hardness of 30, and tensile strength of 4,000...

Read More »
Sealants

Wall Joint System provides watertight sealing.

Designed for curtainwall and metal cladding systems, as well as concrete, brick, and stone structures, pre-compressed COLORSEAL combines factory-applied and cured silicone bellows with impregnated expanded foam sealant backing. Silicone remains pliant, UV stable, and watertight over time and temperature. R-value of 3.28/in. of depth imparts thermal insulation at structural join-gaps, while...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics