Sealants

Sealants

Weatherproof Sealant is designed for tilt-up construction.

Manufactured in one color and single limestone 5 gal unit configuration, Tilt-Seal(TM) is one-component, solvent-free, non-toxic, and environmentally friendly water-based acrylic latex sealant that comes with low VOC content, and features color stability and resistance to ultraviolet rays, ozone, and airborne contaminants. It can be painted within 24 hr, enables easy clean-up with water, and...

Read More »
Coatings

Floor Coatings provide accident-proof protection.

Available in clear or colors for indoor and outdoor use, Non-Slip and Non-Skid Coatings will resist chemicals and caustics. Products are designed for both foot and vehicle traffic and are packed in 1 and 5 gallon pails. Applied by roller, permanent epoxy and rubber-based coatings are suited for use on cement, concrete, metal, steel, wood, fiberglass, aluminum, and tile, as well as ceramic and...

Read More »
Coatings

New ParkerSlick Alternate Seal Coating

New ParkerSlick Alternate Seal Coating Has Better Adhesion and Friction Properties Than Standard Polytetrafluoroethylene Coatings. LEXINGTON, KY, March 11, 2008 - Parker Hannifin's O-ring Division is now offering a new external seal coating as an alternative to standard polytetrafluoroethylene (PTFE) coatings. ParkerSlick, like PTFE coatings, comes in various colors, from clear to medium green to...

Read More »
Adhesives

Adhesives/Sealants have permanently elastic formulation.

Loctite® 5510(TM) and Loctite 5570(TM) are primerless, one-component, odorless adhesives that cure by reacting with ambient moisture and achieve functional strength in 24 hr. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands ongoing shock/impact. Available in clear or white, Loctite 5570 replaces...

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Threadlockers

Adhesives and Sealants are suited for fuel cell assembly.

Structural adhesives for metal/plastic bonding, threadlockers, thread sealants, seam sealants, and general-purpose adhesives are designed for micro- to large-size, stationary or portable fuel cell applications. Resistant to acids, coolants, and chemicals, these products are formulated to deliver gas-tight seal on components and stacks. Membrane electrode assembly (MEA) adhesives and sealants bond...

Read More »
Caulk

Klein Tools Introduces New Line of High-Performance Specialty Chemicals

LINCOLNSHIRE, ILL - June 2008 - Klein Tools recently introduced its new line of high-performance specialty chemicals including contact cleaners, firestop caulk, room temperature vulcanizing (RTV) silicone sealants, lubricants, and wasp and hornet spray. For use in a variety of work environments, Klein® chemicals are VOC (volatile organic compound) compliant and high dielectric. Color-coded...

Read More »
Concrete Repair Compound for Harsh Environments

Concrete Repair Compound for Harsh Environments

Since 1975 Delta Chemicals provides concrete repair and reinforcement products, concrete finishing, treatment and maintenance products to consumers and construction industries. Specializing in concrete repair products, including concrete sealers, nonslip floor coatings, liquid crack fillers, and more. Delta announces ALL-KRETE concrete repair compound that cures at room temperature in 30 minutes....

Read More »
Epoxy Sealer penetrates deep to protect concrete, masonry,.
Miscellaneous Protectors

Epoxy Sealer penetrates deep to protect concrete, masonry,.

Featuring water-thin viscosity, Floor-Nu® Penetrating Sealer penetrates as deep as Â-¼ in. into pores of concrete or masonry surfaces in order to protect against effects of moisture, freeze/thaw cycles, salts, oils, and specific chemicals. This 2-component (1A:1B) clear epoxy, which can also be used on insulation and wood or concrete floors, locks in loose aggregate on surface and...

Read More »
Epoxy Adhesive is suited for cryogenic applications.
Epoxies

Epoxy Adhesive is suited for cryogenic applications.

With mix ratio of 100:65 by weight, EP29LPSP can withstand temperatures to 4 K, and resist cryogenic shocks (room temperature down to liquid helium temperatures in 5-10 min time period). It cures at room temperatures, and can be heat cured at 130-165°F for 6-8 hr. Chemical resistant adhesive features mixed viscosity of 400 cps, tensile strength of 6,500 psi, tensile modulus of greater than...

Read More »
Elastic Adhesives/Sealants perform flexible metal bonding.
Adhesives

Elastic Adhesives/Sealants perform flexible metal bonding.

Compatible with various paint systems, Terostat® 7100(TM) Adhesive/Sealant and Terostat 7700(TM) Adhesive are primerless, permanently elastic formulations used to bond and seal dissimilar substrates. Both one-component, odorless adhesives are non-corrosive and free of solvents, isocyanates, silicones, and PVC. They resist aging and weathering, cure by reacting with ambient moisture, and...

Read More »

All Topics