Triangular Screws are designed for sheet metal joining.
Screws

Triangular Screws are designed for sheet metal joining.

Utilizing flow-hole forming technology in fabrication process, Flowform® screws heat sheet metal via axial force and driver speed. After screw penetrates material, trilobal shape causes metric thread to be formed in host material that can accept standard metric screw if repairs are needed. Formed hole adapts to shape of screw after controlled-torque assembly, and process eliminates need for...

Read More »
Screws

Bartite Sealing Screws Tested to Withstand 8,000 PSI

An Advanced Alternative To Screw/O-Ring Combinations Wilmington, MA - Gaynor Industries is pleased to announce the successful completion of independent hydrostatic pressure testing for BarTite Sealing Screws. Testing results place BarTite Sealing Screws at or above pressure capabilities of many standard screw/o-ring combinations. According to Leo Prokopovich, Product Manager, BarTite Sealing...

Read More »
Captive Panel Screws come in 3 mounting styles.
Captive Screws

Captive Panel Screws come in 3 mounting styles.

Integrating captive screw with anti cross-threading feature and PC/ABS colored knob, PEM® C.A.P.S.® Screws provide fastener solution where subsequent access to assembly may be required. Spring-loaded assemblies install permanently in aluminum or steel sheets as thin at .036 in. and can be supplied in self-clinching, flaring, or floating mounting styles. Available with thread sizes...

Read More »
Joining Systems provide protection against disassembly, theft.
Fasteners

Joining Systems provide protection against disassembly, theft.

TriPress® fasteners, featuring triangular cross-section shanks, press into round core holes, which take on shape of fastener as result for form-fit joint. After shank is pressed in, fastener is resistant to stripping and pull-out. LocTec® screw system combines special screw drive geometry with special assembly tool, which makes it impossible to loosen or remove fasteners without...

Read More »
Permanent Captive Panel Screws offer 2 mounting styles.
Captive Screws

Permanent Captive Panel Screws offer 2 mounting styles.

PEM® Type PF7M(TM) has self-clinching mounting design and installs flush on back of panels as thin as .036 in. They come in 2 screw lengths with thread sizes No. 4-40 through No. 8-32 and M3-M4 and install into panels with hardness of HRB 80 or less or HB 150 or less. With flaring design, PEM® Type(TM) PF7MF installs flush on back side of panels as thin as .031 in. and come in 2 screw...

Read More »
Drilling Machinery

Deck Building Just Got a Lot Smarter with DeckWise(TM)

GAFFNEY, S.C.- These days, deck builders are being flooded with products that promise universal results. Unfortunately, the majority of these deck tools are not suitable for the toughest hardwood. To make matters worse, if someone does use the wrong screws or deck tools, the deck's overall look and performance can be negatively affected. As the leading manufacturer of hidden deck fasteners, the...

Read More »
Thread Forming Slashes Costs by 88%
Thread Cutting / Rolling Screws

Thread Forming Slashes Costs by 88%

Taptite 2000® generation of thread forming screws combines efficiency advantages with process reliability. A total cost saving of up to 88% can be achieved in threaded fastener assembly. The Taptite 2000® generation of thread forming screws from Arnold Umformtechnik GmbH & Co. KB makes a fundamental contribution to cost reduction in threaded fastener systems. Based on experience,...

Read More »
Titanium Bolts and Screws suit aerospace applications.
Fasteners

Titanium Bolts and Screws suit aerospace applications.

Manufactured from titanium alloy TI-6AL-4V, externally threaded NAS and MS Fasteners are suited for applications onboard commercial and military aircraft ranging from actuators to seat track assemblies. Parts can be manufactured to achieve 160 ksi tensile strength and 95 ksi shear strength. Available uncoated or with aluminum or cadmium plate, fasteners feature thread sizes from -04 to -8 and...

Read More »
Cap Screws

Wood Screws come in type 305 stainless steel.

Available unpainted as well as painted in variety of colors, line of Wood Screws includes composite deck screws, trim head screws, and all-purpose flat head screws. Composite deck screws also come in coated version. Packed in reusable polypropylene containers, all feature deep 6-lobe star drive, providing more torque than square drive screws.

Read More »
Zip Screws deliver off-angle fastening for HVAC ductwork.
Screws

Zip Screws deliver off-angle fastening for HVAC ductwork.

Intended for HVAC duct fabrication and installation, S-MS HVAC Zip Screws utilize HyperThread technology, which provides tapered point and shank for consistent driving with almost no metal filings. Self-piercing units are capable of being driven at angles up to 30°. Made of carbon steel with zinc electroplating, screws come in No. 8 S-MS size driven with ¼ in. drive for 20-28 gauge...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics