New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Diamond Saw cuts through quartz and glass.

Designed to use 1 in. wide grit-edged saw bands, Model 2012-D12 features 20 in. throat with standard 12 in. work height that accommodates wide range of material sizes. It includes 20 in. wheels to minimize band fatigue, electric ballscrew-controlled cast iron table with 12 in. stroke, and variable frequency 5 hp ac drive with band speeds from 550-5,500 fpm. Device includes feed-rate control from...

Read More »
Semi-Automatic Cold Saw meets demands of production sawing.

Semi-Automatic Cold Saw meets demands of production sawing.

Along with vertical column design for vibration-free sawing, Model C360SA features 14 -½ in. HSS blade; 4 hp, 3-phase TEFC motor; 2-speed spindle, 18 and 36 rpm; totally enclosed transmission; 24 V controls; and built-in flood coolant. Controls facilitate setup and operation, while full guards are removable for cleaning. Cutting capabilities include round and square profiles or solid mild steel...

Read More »
Manual Cold Saw uses solid hinge-type design.

Manual Cold Saw uses solid hinge-type design.

Suited for prototype or limited production work, Model C315/350 features 14 in. HSS blade, 3.5 hp 3-phase TEFC motor, 2-speed spindle, totally enclosed transmission, 24 V controls, and built-in flood coolant. Double vise assembly, with 6-¼ in. max opening, provides holding power on both sides of cut for burr-free operation. Machine cuts round shapes up to 4 in. dia at 90-

Read More »

DoAll to Introduce New Band Sawing Machines with Unique Features at IMTS

DoALL Sawing Products will introduce Model CP-21A, the first in a new line of high production dual-column band sawing machines in North Building Booth B-7301 at the International Manufacturing Technology Show in Chicago, Illinois on September 8-13, 2008. Other new sawing machine introductions will include Model SM-16D dual swivel scissor-type saw, Model 2613-V3 26-inch vertical contour saw and...

Read More »

Inmes IM-350 Double Miter Saw from PAM Fastening for Moulding Applications

CHARLOTTE, North Carolina--- The rugged Inmes IM-350 Double Miter Saw from PAM Fastening Technology makes quick work of cutting small and large moulding applications. The PAM Fastening IM-350 double miter saw was developed for cutting with absolute precision giving a perfect miter corner joint. The two large 350mm blades are easily capable of cutting up to 8 1/4-

Read More »
Carbide Cutoff Systems can replace 3-4 production saws.

Carbide Cutoff Systems can replace 3-4 production saws.

Designed for fully automatic cycles, Nishijimax CNC Carbide Cutoff Systems feature auto loaders and bar stockers. With NC Saw Spindle Feed Axis, precise feed rate is set automatically and input chip load is maintained. Powder metal saw blade brake enables zero vibration when blade enters cut, while gearbox oil chiller maintains constant gearbox temperature. Offering blade capacities from...

Read More »
Cordless Tool Kit includes li-ion hammer drill and saws.

Cordless Tool Kit includes li-ion hammer drill and saws.

Supplied in heavy-duty carrying case, 4-piece 18 V cordless combination kit includes SBZ 18 hammer drill/driver, ASE 18 reciprocating saw, KSAP 18 circular saw, and MLA 18 flashlight. Two 18 V batteries, featuring Li-Power lithium-ion technology, are also included for powering SBZ 18, ASE 18, and KSAP 18 in various construction applications. Air-cooled battery charging system, AC30 Plus, also...

Read More »
Combined Saw/Drill cuts rails for railroad industry.

Combined Saw/Drill cuts rails for railroad industry.

Used for high-production cutting of ferrous and nonferrous metals, Amsaw R series offers blade changeover time under 3 min, hardened spindle gears ground for minimum backlash, as well as saw blade guide and dampening device. Dry operation means no coolant is needed, double and triple measurement strokes accommodate extra-length cuts, and clamp to unclamp time is 32 sec. For safety, electronic...

Read More »

Hole Saws are cryogenically hardened .

Featuring Matrix II bi-metal construction and precision-ground tooth geometry, Ice Hardened(TM) hole saw is suited for metal and wood cutting in wide variety of HVAC, electrical, plumbing, and maintenance/repair applications. It features positive rake angle for fast cutting, radiused tooth back that helps reduce stress on teeth, and deeper gullets that quickly remove chips. Including 49 models,...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics