Saw Blades

Band Saw Blades exhibit wear- and heat-resistance.
Saw Blades

Band Saw Blades exhibit wear- and heat-resistance.

Offered in 7 widths and thickness from Â-¾ x .035 in. to 3 1/8 x .063 in., Gladiator(TM) cutting blades feature bi-metal construction with fatigue-resistant alloy steel backing. Tooth design includes triple-tempered M42 steel teeth with 8% cobalt at up to 12° rake angle. Products cut steels up to 42 HRC as well as nickel-based and non-ferrous alloys. Gladiator Pulsator line features...

Read More »
Saw Blades

Band Saw Blades feature armor-like coating.

ARMOR CT Blades have heat- and wear-resistant carbide teeth that are applied using carbide weld process. ARMOR CT BLACK blades feature AlTiN coating making them suited for mid to upper grades of carbon steel solids; alloy, stainless, mold, and tool steels, as well as bundled, mild steel tubing. Sizes range from 1Â-¼ x .042 to 3 x .063 in. ARMOR CT GOLD blades have TiN coating for medium- to...

Read More »
Saw Blades

Band Saw Blades handle highly abrasive cutting jobs.

Series HRc features micro-grained heat- and wear-resistant carbide teeth that are applied using carbide weld process, which helps prevent teeth from breaking off and becoming lodged in workpiece. Reinforced design provides resistance to tooth strippage and allows for penetration in difficult applications. Available in 1 x .035, 1Â-¼ x .042, 1½ x .050, and 2 x .063 in., blades are...

Read More »
Saw Blades retain sharp edges in construction applications.
Saw Blades

Saw Blades retain sharp edges in construction applications.

Offered in 16 blade sizes and tooth variations, construction series circular-saw blades feature C3 Dyanite Carbide® teeth, anti-friction coating, and thin plate and kerf. They are hardened to Rc 40-44 to resist warping. Products include 7Â-¼ in. dia fiber cement and metal cutting blades; 7¼ in. dia blades with universal arbor and diamond knockout; and 8¼, 10, and 12 in....

Read More »
Reciprocating Saw Adapters plug into brand name saws.
Saw Blades

Reciprocating Saw Adapters plug into brand name saws.

Suited for automotive bodywork applications, Flush-Cut Adapters for cutting, rasping, and sanding allow users to make cuts in hard-to-reach places. They also permit rasping and sanding from flush surface in tight spots, without bending blades or damaging materials. Tools, able to reach behind trim and framing members, are useful in projects from framing to finishing.

Read More »
Grit Hole Saw resists snags, heat, wear, and abrasion.
Saw Blades

Grit Hole Saw resists snags, heat, wear, and abrasion.

Grit Hole Saw features tungsten carbide cutting edges that are permanently bonded to alloy blade body, making it suited for cutting surfaces that are too hard, abrasive, or thin for standard bi-metal hole saw. Ranging in size from 3/4 to 6 7/8 in., saw is suited for cutting cast iron, composites, drywall, plaster, stucco, ceramics, fiberglass, and hardwood.

Read More »
Hacksaw offers blade change ability with pre-tensioning.
Saw Blades

Hacksaw offers blade change ability with pre-tensioning.

FatMax® High Tension Hacksaw features adjustable thumb-dial tension mechanism that provides tension memory and one-piece design that permits tension settings up to 330 lb. Power load sliding tension mechanism increases leverage and provides greater control when releasing blade, while 24 tpi, bi-metal blade allows for flush cutting with 4.75 in. depth cutting capacity. Die-cast, slope-nosed...

Read More »
Metal Cutting Blades cut ferrous and non-ferrous metals.
Saw Blades

Metal Cutting Blades cut ferrous and non-ferrous metals.

Constructed with vibration dampening geometry, Endurance® Carbide Tipped 8 in. Metal Cutting Circular Saw Blades resist bending and twisting and do not produce clouds of abrasive dust. They deliver straight cut with clean, burr-free edge with minimal heat and sparks. Blades with 42 teeth are recommended for metals over 3/32 in. thick, while 50-tooth blades are suited for thinner materials....

Read More »
Saw Blades

Gas Saw Blades are triple-reinforced.

Available with 20 mm and 1 in. arbor hole sizes, 14 in. metal and ductile gas saw blades measure 5/32 in. thick. Blades are constructed with 3 layers of fiberglass reinforcement for increased strength on the sides of the wheels. DSA approved blades are available in 2 grains: aluminum oxide, for metal/steel applications, and aluminum oxide-silicon carbide mix, for working with ductile iron.

Read More »
Bi-Metal Band Saw Blades have neutral rake tooth design.
Saw Blades

Bi-Metal Band Saw Blades have neutral rake tooth design.

Valu-Pac bi-metal band saw blades are offered in packages containing 3 blades with identical pitch, width, and length. They incorporate 8% matrix cobalt cutting edge for resistance to tooth chipping and neutral rake tooth design for additional tooth strength. Products are offered in 1 in. width with 4-6 or 5-8 pitch and 1Â-¼ in. width with 3-4 or 4-6 pitch. Multi-pitch teeth reduce noise...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers