Saw Blades

Jig Saw Blades expand jig saw capabilities.
Saw Blades

Jig Saw Blades expand jig saw capabilities.

Suited for cutting material sandwiched between metal, 7 in. T718BF3 bimetal T-shank blade features 14 teeth/in. and provides 4¾ in. cut depth. It handles medium density fiberboard, structural insulated panels, and oriented strand board. Designed for making fast cuts in wood, 7 in. T744D3 T-shank blade is made of high carbon steel with 6 teeth/in. and cut depth of 5 5/16 in. Blade is suitable...

Read More »
Band Saw Blade cuts tubes and profiles.
Saw Blades

Band Saw Blade cuts tubes and profiles.

Targeting structural and fabrication industries, 3853 TOP Fabricator features PF tooth design that makes teeth resistant to tooth-stripping. M42 tooth material extends blade life, while floating set optimizes surface finish. Designed to minimize out-of-square cutting and cutting noise, 3853 TOP Fabricator is suited for cutting I-beam, angle iron, bundles, square and round tubes, H-beam, channel,...

Read More »
Saw Blades

New Master Cobalt® Wood Cutting Reciprocating Saw Blades from the M.K. Morse Company

CANTON, Ohio - March 1, 2005 - The M. K. Morse Company introduces its new line of Master Cobalt® reciprocating saw blades for cutting wood and nail embedded wood. Utilizing an innovative tooth geometry and set pattern, this new blade dramatically increases productivity while decreasing the cost per cut. The new 5.5 pitch, .050 thick, Master Cobalt blades are available in 6 , 9" and 12"...

Read More »
V-Notch Saw cuts at 2 preset angles.
Saw Blades

V-Notch Saw cuts at 2 preset angles.

ARC(TM) (Angled Repositioning Cuts) saw is used inline for rendering angled edges on post-extruded profiles. Able to cut from 45-135°, inline multi-angle V-notch saw features 36 in. table travel and cut length accuracy of ±0.020 in. Device includes 18 in. dia carbide-tipped saw blade and 3 hp ac motor. PLC-controlled graphical interface panel enables operators to set cutting angle and...

Read More »
Saw Blades

Metal Cutting Saw utilizes dry cutting technology .

Equipped with 72 tooth Metal Devil® carbide-tipped blade, CSM14B 14 in. metal cutting saw makes burr-free cuts in 5 1/8 in. dia and 3Â-¾ in. rectangular metal pipe. Saw features 15 A, 1,300 rpm motor, and steel base provides stability with pre-drilled holes for bolting to workbench. With 6 pre-set markings in base, vice can be set for 45° and 90° cuts.

Read More »
Bandsaw Blades cut wide range of material.
Saw Blades

Bandsaw Blades cut wide range of material.

Designed to minimize blade changeovers, BroadBand® A8 Bi-Metal Bandsaw Blades can cut materials ranging from wood and lightweight aluminum to stainless steel in multitude of shapes. Balanced tooth spacing design combined with raker tooth delivers consistent wear across blade over time. Available in blade widths of Â-¾, 1, and 1¼ in., BroadBand A8 Bandsaw Blades come in variety...

Read More »
Cobalt Saw Blades cut through various metals.
Saw Blades

Cobalt Saw Blades cut through various metals.

Featuring 8% cobalt cutting edge and shatterproof bi-metal design, Long Life blades are designed to optimize performance of reciprocating saws using 1/2-inch universal shank. Blades cut through structural steel, pipe, conduit, sheet metal, heavy-gauge rebar, barstock, and angle iron, and are available in 4 designs ranging in size from 6 x 3/4 in. to 12 x 1 in.

Read More »
Saw Blades

Metal Cutting Circular Saw includes blade Laser Guide.

Capable of cutting metal without burring, heat distortion, or sparking, 9 in. SteelMax S9 circular saw is designed for mild steel, SS, and aluminum. With 45° beveling capability, 15 A motor operates at 2700 rotations/min. S9 is used in applications like tubing, pipe, floor grating, angle iron, plate steel to Â-½ in. depth, and corrugated metal roofing. It weighs 20 lb, features 25 mm...

Read More »
Circular Saw includes 2 LED lights for cutting accuracy.
Saw Blades

Circular Saw includes 2 LED lights for cutting accuracy.

Equipped with 15 A motor that delivers 5,200 rpm, 8 Â-¼ in. Model 5008FA provides 2 7/8 in. cutting capacity at 0° and 2 ¼ in. at 45°, making it suited for large wood cutting applications. LED lights are built into tool housing so as not to obstruct vision or interfere with line of cut. Saw includes ball and needle bearing construction, centrifugal fan, electric brake,...

Read More »
Saw Blades

Forrest Manufacturing's Custom Woodworker II Continues to Grow in Popularity with Advanced Table Saw Operators

CLIFTON, New Jersey, January 24, 2006-Jay Forrest, Vice President of Forrest Manufacturing, announced today that demand for the company's Custom Woodworker II blade continues to grow among professional woodworkers and serious hobbyists. "We're finding that more and more advanced table saw operators choose this excellent blade because of its outstanding versatility and performance. Craftsmen like...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics