Saw Blades

Saw Blade cuts through wood-plastic composites,.
Saw Blades

Saw Blade cuts through wood-plastic composites,.

Concave Face Blade features teeth with hollow-concave faces, allowing just highest points to cut through material, minimizing resistance and heat buildup. Also, each tooth, manufactured from corrosion-resistant C-4 micrograin carbide, bears same chip load, enabling blade to cut with minimal splintering and tearouts. Plate has optimized perimeter concentricity and side runout. Blade is available...

Read More »
Saw Blades

Jig Saw Blades minimize burrs on both sides of cut.

With teeth that cut in both directions, Dual Cut(TM) Jig Saw Blades provide clean cuts on both sides of workpiece. Model BU3DC is for straight and curved cuts in material ranging from Â-¼-1 1/8 in., while Model BU2DCS is for cut-outs, contours, and more complex cuts in material from 5/32-¾ in. Blades are suited for cutting fiberboard, laminates, mixed material, soft woods, hardwoods,...

Read More »
Saw Blades

Blades meet challenges of evolving materials and machinery.

Custom-designed blades can be produced to accommodate specific machines/materials. Design process includes idea sharing, research into physical attributes and abilities of blades, and, in some cases, producing prototypes. In addition to considering 11 key attributes that affect blade performance, customization capabilities can combine different grinds in infinite variety of sequences. Saw body is...

Read More »
Saw Blades

Metal Cutting and Drilling Going Green

Centennial, CO. 2-5-2009 SteelMax, LLC, a recognized leader in the metal cutting and drilling tool industry, is proud to announce an initiative to positively impact the environment and adhere to stricter Occupational Safety and Health directives. According to Gerry Zack, VP of Marketing and Product Development, "Through innovative engineering design, we have taken steps to lower energy costs in...

Read More »
Reciprocating Saw Blades feature Micro-Edge Technology(TM).
Saw Blades

Reciprocating Saw Blades feature Micro-Edge Technology(TM).

Edge for Metal Demolition reciprocating saw blades come in 6 and 9 in. lengths with kerfs of .035, .042 and .062 in. Blades with 14+18 TPI suit medium gauge metals, while 8+10 TPI models are designed for thick gauges metals and 8+10 TPI version is for metal demolition. Powder metal steel alloy minimizes heat build-up, where as 2 x 2 tooth geometry helps deliver cleaner cut by effectively removing...

Read More »
Diamond Saw Blades come in 26 general-purpose versions.
Saw Blades

Diamond Saw Blades come in 26 general-purpose versions.

Covering most common sizes for variety of cutting applications, Saw-lect(TM) and Saw-preme(TM) range of blades are laser-welded and well balanced to deliver fast and straight cuts. Sizes range from 12-20 in., with bond ratings from 3-8 to cut brick, block, stone, cured concrete, green concrete, asphalt, and asphalt over concrete. Blades fit all 1 in. arbors and can be used wet or dry, as well as...

Read More »
Automatic Sawing System cuts rails in 32 sec.
Saw Blades

Automatic Sawing System cuts rails in 32 sec.

Operating with minimized environmental impact, AMSAW® R300R integrates rail hole drilling station for bolted joints at rail ends as well as carbide cutting blades, which accept 5 retips and up to 40 resharpenings before replacement. It includes onboard PLC, preloaded ballscrews, and 3 vertical and 2 horizontal hydraulic clamps enabling 90Â-º cut on rail ends. Saw blade guide and...

Read More »
New Starrett Reciprocating Blades for Pneumatic Saws Offer Faster Cutting, Longer Blade Life
Saw Blades

New Starrett Reciprocating Blades for Pneumatic Saws Offer Faster Cutting, Longer Blade Life

ATHOL, MA U.S.A. (January 6, 2009) - The L.S. Starrett Company has recently added a new line of saw blades to their power tool accessory line that are designed specifically for pneumatic (or air) reciprocating saws. Pneumatic saws, which are widely used in metal fabricating facilities, the sheet metal industry, auto body shops and other various applications, are less bulky than electric...

Read More »
Bandsaw Blades offer fatigue resistance.
Saw Blades

Bandsaw Blades offer fatigue resistance.

Available in 1Â-¼, 1½, and 2 in. sizes, Challenger(TM) Bimetal Bandsaw Blades are constructed using PTP(TM) Technology, which ensures optimized performance during production cutting. Sawing applications include structural shapes, as well as thick wall and thin wall tubing made of carbon and alloy steels being cut as single, layers, and bundles. Both standard and heavy set blades are...

Read More »
Saw Blades

Milwaukee Introduces New M12 HACKZALL(TM) Blades

Milwaukee Electric Tool Corporation introduces M12 HACKZALL(TM) Blades, a line of cordless reciprocating saw blades optimized for the new HACKZALL(TM) Reciprocating Saw. HACKZALL(TM) Blades deliver up to 35% more cuts per charge than leading reciprocating saw blades and are ideal for a variety of HVAC, electrical, plumbing and maintenance/repair applications. Milwaukee HACKZALL(TM) Blades combine...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics