Roller Bearings

Roller Bearings help extend wind turbine gearbox life.
Roller Bearings

Roller Bearings help extend wind turbine gearbox life.

SKF® high-capacity cylindrical roller bearings feature low cross-section cage that eliminates risk of damage by roller-to-roller smearing. Cage design also increases lubrication by allowing room for oil passage, which lubricates contacts between rollers and raceways, provides cooling, and reduces risk of metal-to-metal contact. Optimized cross-sections of rings and rollers minimize...

Read More »
Cross Roller Ring provides precise rotary motion.
Roller Bearings

Cross Roller Ring provides precise rotary motion.

Featuring one-piece outer and inner ring construction with mounting holes on both rings, Type RU requires no precise housing preparation or special fixturing. Sizes range from 20-350 mm ID and 70-540 mm OD with roller pitch circle diameters from 41.5-445.4 mm. Applications range from industrial robots to video arcade machines such as virtual skiing games.

Read More »
Roller Bearings

Cylindrical Roller Bearings are built for extended life.

Produced with minimal peak roughness values on raceway surfaces to provide optimized stress concentrations, X-Life(TM) bearings feature cylindrical rolling elements that support forces along contact lines and can handle dynamic loads up to 260 kN. Available cage types include pressed steel, profile milled brass cage, one-piece polyamide (plastic), polyamide segmented, machined brass, brass disk...

Read More »
Rolling Bearings offer electrically insulated design.
Roller Bearings

Rolling Bearings offer electrically insulated design.

Promoting machine uptime, SKF INSOCOAT® Rolling Bearings protect against damage caused by passage of electric current in ac and dc motors, generators, and associated equipment. Thin aluminum oxide layer forms barrier against grease oxidation and electric arcing that typically causes fluting damage to rollers and raceways. Bearings are performance tested to 1,000 Vdc with minimum ohmic...

Read More »
Bearings are made to exceed ISO tolerance specifications.
Roller Bearings

Bearings are made to exceed ISO tolerance specifications.

Dimensionally interchangeable with standard products, SKF® Explorer bearings are manufactured from low-oxygen steel and feature ground transition raceways/shoulders. Modified polyamide/brass cage geometry lends to speed ratings and acceleration, lower heat generation, and reduced vibration and noise, while heat-treating process minimizes dimensional changes. Products come in multiple...

Read More »
Cylindrical Roller Bearings run cool at high speeds.
Roller Bearings

Cylindrical Roller Bearings run cool at high speeds.

SKF® Explorer single-row cylindrical roller bearings feature logarithmically crowned rollers that optimize contact geometry between roller and raceway for operation even under misaligned conditions. Bearing rollers are guided between integral open flanges on one ring, which reduces friction. Available with bore sizes from 0.7874-8.6614 in. in dia, standard units have molded glass...

Read More »
Ready-to-Mount Bearing Units use concentric locking system.
Roller Bearings

Ready-to-Mount Bearing Units use concentric locking system.

ConCentra products utilize concentric locking technology, which eliminates potential uneven load distribution, shaft damage, and fretting corrosion during equipment operation. Ball bearing units incorporate SKF deep groove ball bearings, pre-lubricated for life or with lubrication fittings, while roller bearing units use SKF Explorer spherical bearings pre-lubricated with lubrication fittings....

Read More »
Toroidal Roller Bearings suit industrial fan applications.
Roller Bearings

Toroidal Roller Bearings suit industrial fan applications.

CARB® bearings perform as non-locating bearings in self-aligning bearing systems for industrial fans. Compact, radial roller bearings compensate internally for angular misalignment and accommodate axial shaft expansion. Raceway profiles result in minimized frictional running and reduced operating temperatures. Used with same standard housings and accessories as other self-aligning bearings,...

Read More »
Roller Bearings

Anti-Friction Bearings reduce noise and maintenance.

X-Life(TM) products include 4 types of bearings. E1 spherical-roller bearings feature optimized surface finishes and bearing and roller geometries. Angular-contact ball bearings are manufactured with brass, TVP, or pressed steel cages, while SL series cylindrical-roller bearings are available with brass or plastic cages. KUVE and RUE ball and roller monorail guidance systems, suited for dynamic...

Read More »
Ceramic Roller Bearings provide uniform preload.
Roller Bearings

Ceramic Roller Bearings provide uniform preload.

Series KTNHA/HC5-SP single-row, silicon nitride, cylindrical-equipped roller bearings can achieve speeds up to 2 million Ndm. Since polymer cages are made of glass fiber reinforced PEEK, cage to outer ring contact offers wear resistance and stability at high speeds. Shaft thermal elongation is eliminated as bearings allow for changes in shaft length. Ranging in size from 40-120 mm bore, bearings...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics