RF Components

Optical Repeater Module is designed for WCDMA networks.

Optical Repeater Module is designed for WCDMA networks.

Offered with 9.6 and 19.2 kbit/sec data rates for selection, RF module monitors and controls optical output power, LD bias current, received optical power, input and output RF signal power of Master, received FSK signal power and RF Gain control through MCU. Features included are linear analog PD with high sensitivity and high power DFB laser, low noise, linear RF amplifier, as well as built-in...

Read More »

ACiG Technology to Distribute KSW Microtec's RFID Thinlam®

Mainz & Dresden, Germany, April 30, 2009 -­ KSW Microtec AG, one of the world's leading suppliers of RFID components and inlays for secure cards, documents and other form factors, announced today that the company's Thinlam® has been selected by ACiG Technology to be its primary thin pre-laminated product for high frequency (HF) smartcard applications. Thomas Hitzer, CEO of KSW stated today: We...

Read More »

QAM-RF Module suits video on demand applications.

Designed for D5 Universal Edge QAM solution, QPM 8DX4 Module has 4 ports, each capable of outputting up to 8 QAM channels that meet DOCSIS DRFI specification. Configuration of each RF output is flexible, allowing support for multiple services on single channel, on multiple channels within bonded serving group, or on different modules in D5 UEQ. D5 UEQ with QPM 8DX4 installed supports up to 192...

Read More »

Switch Filter Modules suit multiband, multimode 3G handsets.

Along with single-pole nine throw pHEMT switch, RF1194 integrates quad-band GSM/GPRS/EDGE transmit low-pass filtering and 4 GSM/GPRS/EDGE receive surface acoustic wave filters. Model RF1195 integrates single-pole ten throw pHEMT switch and builds on RF1194 architecture by providing additional high-linearity port for 4 total symmetrical WCDMA/HSPA+ Tx/Rx ports. Both cellular switch filter modules...

Read More »

RF Modules optimizes space, functionality in mobile devices.

TRIUMF (TriQuint Unified Mobile Front-end) Module(TM) series streamlines RF footprint for mobile device manufacturers designing next-generation 3G/4G products by combining GSM/GPRS/EDGE and WCDMA/HSPA/LTE transmit functionality. Used in place of multiple discrete modules to conserve board space, modules support 3G and 4G Long Term Evolution (LTE) standards and feature Quad Band...

Read More »

Keithley to Develop RF WiMAX Production Test Solution for Fujitsu Microelectronics' New WiMAX PCMCIA Card and WiMAX USB Dongle Devices

CLEVELAND, OH, Nov 24, 2008 -- Keithley Instruments, Inc. (NYSE: KEI), a leader in solutions for emerging measurement needs, announced today that it is developing a WiMAX device production test solution for two 802.16e WiMAX devices from Fujitsu Microelectronics Limited. This WiMAX RF SISO/MIMO manufacturing test configuration features Keithley's award-winning RF test solutions, the Model 2820 RF...

Read More »

RF System targets wireless sensor networks and HMIs.

Suited for embedded control applications, CyFi(TM) Low-Power RF solution consists of CyFi protocol stack in PSoC Designer(TM) embedded design software, selected PSoC device, and CYRF7936 CyFi transceiver. Interference immunity results from Direct Sequence Spread Spectrum modulation and agility to move to 80 channels in 2.4 GHz band. CyFi protocol stack offers pre-configured, customizable PSoC...

Read More »

RF Micro Devices® Commences Volume Shipments of POLARIS® to Multiple Leading Handset Manufacturers

POLARIS 2, POLARIS 3 And POLARIS 3 Silver To Support Multiple New Handsets In The Second Half Of 2008 GREENSBORO, N.C., July 10 -- RF Micro Devices, Inc. (Nasdaq: RFMD), a global leader in the design and manufacture of high-performance semiconductor components, today announced it is commencing volume shipments of its POLARIS® RF solutions in support of six new feature-rich multimedia handsets....

Read More »

RF Module offers direct analog input.

With 4 analog inputs, EmbedRF(TM) can directly interface with voltage-output sensors and transmit information up to 50 ft. Miniature wireless board offers bi-directional transmit/receive point-to-point and point-to-multipoint capabilities. Measuring 0.8 x 0.7 in. and less than 0.2 in. thick, module provides output power up to 5 dBm at frequencies from 400-928 MHz. It includes on-board antenna,...

Read More »
Software Radio PMC Module handles power metering/beamforming.

Software Radio PMC Module handles power metering/beamforming.

Model 7152 digitizer has 4 x 200 MHz, 16-bit A/D converters and 32-channel digital down converter (DDC) with 20 kHz to 10 MHz bandwidth. Single-slot module offers DDC gain and phase adjustments, signal summation, and decimation range programmable from 16-8,192. Device features 32 power meters that continuously measure individual average power output of each of 32 DDC channels; threshold...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics