RF Attenuators

RF Attenuators

Attenuator and Terminator suit high-frequency applications.

Rated at 10 W when heatsinked, PAT3060P RF Power Attenuator features frequency range from DC-10 GHz with VSWR of less than 1.3 at 10 GHz, and attenuation values of 0-10 dB and 20 dB. With power ratings to 250 W, surface-mount RFTF Terminator ranges from DC-3 GHz with VSWR of less than 1.1 at 3 GHz and stray capacitance of less than 0.1 pF at 250 W. Both are suited for RF power meters, RF and...

Read More »
RF Attenuators

Miniature Digital Attenuator covers multi-octave range.

Measuring 1.7 x 1.8 x 0.75 in., Model A6P-69N-0MG Multi-Octave Digitally Controlled Miniature PIN Diode Attenuator operates from 2-18 GHz with 64 dB Dynamic Range in 0.25 dB steps. Across entire band, VSWR is less than 2.1:1, insertion loss is less than 4.5 dB, and solution is capable of handling +13 dBm CW, 1.0 W max. With 8 BIT Binary and TTL compatible logic, switching speed is less than 1.5...

Read More »
RF Attenuators

LXI Attenuator/Switch Drivers facilitate design validation.

Designed for bench-top and ATE environments, models 11713B/C offer GUI along with front-panel and remote-control features that aid in design validation and automated testing. Model 11713B drives combination of 2 programmable attenuators and 2 SPDT switches, or up to 10 SPDT switches concurrently. Model 11713C controls combination of 4 programmable attenuators and 4 SPDT switches, or up to 20 SPDT...

Read More »
Thick Film Attenuators suit RF and microwave applications.
RF Attenuators

Thick Film Attenuators suit RF and microwave applications.

Offered in case sizes from 0805 to 2512, surface mountable IAX Series features power ratings to 4 W and operates with favorable return loss to 18 GHz. Attenuation accuracy starts at ±0.2 dB, and standard attenuation values are 0-70 dB, including 0.5 dB increments. Featuring nominal impedance of 50 W, attenuators are available with platinum silver terminations in both Wraparound and Single...

Read More »
RF Attenuators

Variable Attenuator/Beamsplitter can be mounted on any post.

Designed to work with lasers at variety of wavelengths, Variable Attenuator/Beamsplitter can be used as beamsplitter in holography and precision interferometry applications and as attenuator for general laboratory applications. It divides incident polarized light beam into 2 beams by 90° and intensity ratio of beams can be continuously varied by rotating input half-wave plate. Polarizing...

Read More »
SMT Thick Film Attenuators are available from 1-70 dB.
RF Attenuators

SMT Thick Film Attenuators are available from 1-70 dB.

Suited for RF/microwave applications and communications-oriented circuitry, IMA2391 is operational to 15 GHz in properly matched, continuous 50 ohm system. Architecture is characterized by alumina substrate with solderable input terminals on top. Available in 1 dB increments over its entire range, with tolerance as low as ±0.2 dB, 1206-sized product has nominal impedance of 50 ohms; 75 or...

Read More »
RF Attenuators

Broadband Test Tools have ruggedized design.

Designed as portable, complete solutions for field testing in outside plants, SmartClass access field testers help carriers test broadband access networks. Tools provide test solutions for FTTx/PON, DWDM, CWDM, and xDSL technologies, verifying broadband connectivity and service through access network to customer premise. SmartClass ADSL is suited for ADSL 1/2/2+ testing, while SmartClass OTS-55...

Read More »
RF Attenuators

Digital Attenuator has 15.5 dB attenuation range.

Suited for applications that require monotonic performance, RoHS-compliant MAATSS0022 is 400-2,500 MHz, 5-Bit serial controlled attenuator housed in lead-free MSOP-10 package. This 0.5 dB step GaAs MMIC digital attenuator requires external dc blocking capacitors on RF ports, single positive supply voltage, and 5 individual bit control voltages. It is fabricated using GaAs 1.0 micron process,...

Read More »
Chip Resistor Attenuators replace 3 discrete components.
RF Attenuators

Chip Resistor Attenuators replace 3 discrete components.

Rated at 0.040 W, Model CZA04S features impedance of 50 Ω, while Model CZA06S is rated at 0.075 W with impedance values of 50, 75, 100, 300, and 600 Ω. Both surface mount units offer attenuation ranges and tolerance values of 1-5 dB at 0.3 dB (L) and 6-20 dB at 0.5 dB (H). They are suited for RF signal attenuation applications in telecom and mobile wireless products. Model CZA04S measures...

Read More »
RF Attenuators

Attenuator Subsystems come in user-defined configurations.

Subsystems provide controlled attenuation of RF signals for test and installed systems for analog and digital applications. Attenuator module bandwidth extends from dc to 2.3 GHz and can be designed over specific or maximum range. Modules include signal attenuators for level control and can be controlled locally or remotely. Available in simplex, duplex, and single and multiple network...

Read More »

All Topics