Rework Systems

OK International's Multi-Function Rework System Triumphs at SMT China Vision Awards
Rework Systems

OK International's Multi-Function Rework System Triumphs at SMT China Vision Awards

Hand Soldering, Rework, Fume Extraction and Fluid Dispensing specialist OK International has been presented with a prestigious SMT China Vision Award. Topping the program's Hand Soldering Tools category, the MFR-1100 Series Single Output Soldering and Rework System impressed the judges with its ability to minimize training investment, maximize application possibilities and increase productivity....

Read More »
OK International to Show Nepcon Shanghai 2009 Visitors How to Drive Productivity in Diverse Applications
Rework Systems

OK International to Show Nepcon Shanghai 2009 Visitors How to Drive Productivity in Diverse Applications

OK International is preparing to take a wide range of innovative soldering and production assembly technologies to this year's Nepcon Shanghai being held over 21st - 24th April. On display at Booth 1D06, each system is designed to reduce training investment, perform a diverse array of applications and measurably increase productivity. At the heart of the OK International booth will be the highly...

Read More »
Reballing/Prebumping Station reconditions BGAs/CSPs/QFNs.
Assembly Machinery

Reballing/Prebumping Station reconditions BGAs/CSPs/QFNs.

Providing source for equipment, frames, masks, and accessories, 03.1 Reballing/Prebumping Station offers in-house solution for contractors and OEMs. It uses Rapid IR Heating Technology for energy-efficient lead-free processing temperatures while preventing component/board damage. Also able to convert BGAs, CSPs, and QFNs from leaded to lead-free devices, or vice versa, it incorporates tools and...

Read More »
Bench-Top Systems facilitate SMT assembly, prototyping.
Prototyping Systems

Bench-Top Systems facilitate SMT assembly, prototyping.

Computer-controlled pick-and-place unit, ECM-5611S, offers on-the-fly vision placement and bottom vision for larger components. It places range of fine-pitch devices on 10.6 x 5.9 in. area and holds 24, 8 mm tape feeders. With 18 x 22 in. frame capacity, SR2100 stencil printer offers precision screw alignment to boards; X, Y and Theta adjusting knobs; and double-sided board processing....

Read More »
Rework Station removes, replaces, and resolders SMDs.
Rework Systems

Rework Station removes, replaces, and resolders SMDs.

Martin Expert lead-free rework system v09.6 automatically accomplishes SMT repair, from removal to replacement, as well as resoldering of BGAs, CSPs, Â-µBGAs, and other SMDs. In addition to Hi-Res camera combined with Auto Vision Placement, PC-controlled solution provides IR underheating unit that adjusts to exact board size, software that automatically generates profiles for all solder and...

Read More »
Pick and Place Unit suits mid- to high-volume SMT assembly.
Rework Systems

Pick and Place Unit suits mid- to high-volume SMT assembly.

Optimized for speed and flexibility, Hi Output Line features Cognex® flying vision-controlled MC683 conveyorized dual gantry system with 2 heads that pick as other 2 simultaneously place with repeatable accuracy of ±0.01 mm. Off-line loadable plug-and-play modular smart feeder trolley facilitates changeovers, while 10,500 cph placement speed promotes throughput. Automated, turnkey...

Read More »
Assembly Machinery

Global Technology Awards Honour OK International's Breakthrough Rework System

The team at OK International are currently celebrating a successful performance at the Global Technology Awards where the APR-5000-DZ Advanced Package Rework System topped the hand soldering, repair and rework category. The prestigious award was presented to the electronics assembly specialist at a ceremony held on November 13th at Productronica 2007. Sponsored by Global SMT & Packaging Magazine,...

Read More »
SMT Rework Tweezer provides precision control.
Tools

SMT Rework Tweezer provides precision control.

Designed for Metcal MX-500 Soldering/Rework System, MX-PTZ Precision Tweezer is available with variety of soldering cartridges for reworking discreet and SOIC components. Unit thermally applies heat to end caps of devices while mechanically gripping component during removal. Powered by SmartHeat® Technology, tweezer features double-sided pivot, dual-position pitch adjustment, and fully...

Read More »
OK International to Unveil New Technologies at Productronica 2007, Stand A3.542
Semiconductor Processing Equipment

OK International to Unveil New Technologies at Productronica 2007, Stand A3.542

OK International has confirmed plans to unveil a raft of new technologies at this year's Productronica exhibition on Stand A3.542. Being held in Munich over November 13th - 16th, Productronica 2007 will see the production assembly specialist introduce visitors to its APR-5000-DZ Advanced Package Rework System, PCT-100 Focused Preheater, DX-250 and DX-350 Series of high performance digital...

Read More »
Rework Systems

Low-Cost Manual SMD Rework System Replicates Ideal Processing Environments

Jun 1 2007 Manncorp has introduced a manually operated rework system capable of achieving the exact thermal and air flow conditions necessary for lead-free or regular processing of fine-pitch devices. The Martin Hot Jet 05 is used for desoldering, flux application, placement and soldering of chips, QFPs and BGA/CSPs. Although priced at under $5,000, the system's modules are fully compatible with...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers