Rework Systems

Hansatech Partners with Europlacer
Rework Systems

Hansatech Partners with Europlacer

Dorset, UK - Europlacer, a manufacturer of market-leading flexible SMT placement machines, announces that Hansatech, a leading UK-based contract manufacturer, has chosen Europlacer's iineo-II pick-and-place for use in its facility. Hansatech has been providing manufacturing solutions for more than 25 years. Based in Poole, Dorset, the operation uses 20,000 sq. ft. of production area and employs...

Read More »
Rework Systems

Europlacer iineo II Pick-and-Place Technology Doubles SMT Production Capacity for BGM Engineering

iineo-II offers best value and technology for high-mix manufacturing requirements Tampa, FL - The iineo II pick-and-place equipment from Europlacer, a designer and manufacturer of comprehensive SMT pick-and-place equipment for the global electronics industry, has doubled SMT production capacity for Detroit-based BGM Engineering, an innovative engineering company providing electronic design,...

Read More »
Rework Station automatically places BGAs, CSPs, QFNs, PoPs.
Rework Systems

Rework Station automatically places BGAs, CSPs, QFNs, PoPs.

Equipped with programmable top and bottom hot air as well as rapid on/off IR underheaters, lead-free BR750 has 8 set points that allow exact thermal conditions to be produced for profiles containing heating rate, target temperature, dwell time, and cooling. SMDs are automatically pre-aligned and picked up from component nest at exact centers after size is entered, and upward-looking camera...

Read More »
Modular Rework System removes BGA/CSP and SMT components.
Miscellaneous Stations

Modular Rework System removes BGA/CSP and SMT components.

Featuring free-standing board holder and adjustable tool holder, Model MRS-1100A manages diverse board sizes and thicknesses while providing stable working area. System is available with wide array of nozzles, preheater, adjustable tool holder, board holder, and light magnifier. By integrating advanced rework technologies, Model MRS-1100A offers flexible choice for removal of delicate SMT...

Read More »
OK International to Attend Productronica 2011 with an Array of Innovative Products from the Metcal, OKi and Techcon Ranges
Desoldering Equipment

OK International to Attend Productronica 2011 with an Array of Innovative Products from the Metcal, OKi and Techcon Ranges

OK International is currently preparing to take a selection of world renowned products to the leading trade fair for innovative electronics manufacturing, Productronica 2011. The exhibition is taking place from the 15th to the 18th of November in Munich, at the Munich Trade Fair Centre, where OK International will be showcasing it's Metcal, OKi and Techcon product ranges on stand A4.127. Visitors...

Read More »
OK International to Support the SMART Group Area Array Reliability Annual Conference & Table Top Exhibition 2011
Soldering Machinery

OK International to Support the SMART Group Area Array Reliability Annual Conference & Table Top Exhibition 2011

OK International is pleased to announce they will be supporting this year's SMART Group Annual Conference & Table Top Exhibition. The exhibition will be taking place between the 5th and 6th October 2011, at The Oxfordshire in Thame, England and will focus on Area Array design, assembly, reliability, cleaning and conformal coating. The exhibition provides a good opportunity for OK International to...

Read More »
OK International Will Showcase Assembly and Rework Technology Advances at Nepcon China 2011
Smoke and Fume Extractors

OK International Will Showcase Assembly and Rework Technology Advances at Nepcon China 2011

The OK International team will display and demonstrate its full range of soldering and production assembly technologies at this year's Nepcon China in Shanghai, May 11 - 13. These industry-leading solutions will be fully operational at booth #1F10, including advanced soldering, desoldering and rework systems, programmable pre-heaters, fume extraction and a comprehensive range of dispensing...

Read More »
Smoke and Fume Extractors

Advanced OK International Technologies on Show at SMT Germany 2011

OK International will be showcasing a wide range of advanced technologies for production assembly at this year's SMT Germany exhibition, being held from May 3rd - 5th in Nuremberg, Germany. Represented on Weidinger stand 101 in Hall 6, OK International products on show will include advanced soldering, desoldering and rework systems - to name a few! Taking centre stage on the Weidinger stand, OK...

Read More »
OK International Will Showcase Assembly and Rework Technology Advances at IPC/ APEX EXPO 2011
Smoke and Fume Extractors

OK International Will Showcase Assembly and Rework Technology Advances at IPC/ APEX EXPO 2011

The OK International team will display and demonstrate its full range of soldering and production assembly technologies at this year's IPC/APEX Expo in Las Vegas, April 12-14. These industry-leading solutions will be fully operational at booth # 1634, including advanced soldering, desoldering and rework systems, programmable pre-heaters, fume extraction and a comprehensive range of dispensing...

Read More »
Manncorp's Split-Vision Rework Station Has Auto Removal/Placement Head, for BGAs and QFPs
Soldering Irons

Manncorp's Split-Vision Rework Station Has Auto Removal/Placement Head, for BGAs and QFPs

BGAs, QFPs and other fine-pitch devices can now be desoldered, removed and replaced with the BR720 lead-free rework station from Manncorp. Utilizing split-vision zoom optics with 22x magnification, real-time images of components superimposed on solder pads are continuously displayed on the system monitor. Perfect alignment is achieved when operator makes final X and Y micrometer adjustments with...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers