Rewinders

Rewinders

Elsner Recently Shipped its' First Model GWR-760 High Speed Fully Automatic Wallcoverings Rewinder

Elsner recently shipped its' first Model GWR-760 high speed fully automatic Wallcoverings Rewinder with the Model OW-30-C Shrink Film Roll Overwrapper to a European customer. The New GWR-760 incorporates features of the companies existing high speed Rewinders used for lighter weight papers and films with new, heavy duty rotary cut-off knife and rolling head systems to better handle the heavy...

Read More »
Winders

Parkinson Technologies Sells High-Speed Mark IV Surface Winding System To Fischer & Krecke For Pre-Print Linerboard Machine Application

Key Features of Winding System Include Fully Automatic Roll Changes at Line Speeds with Parkinson's Positran® Transfer System September 8, 2008 Woonsocket, RI A Parkinson Technologies Mark IV Surface Winding System was recently purchased by flexo printing machine manufacturer Fischer & Krecke GmbH & Co. KG will provide fully automatic roll changes while continuing to wind at full line speeds,...

Read More »
Rewinder allows nonstop winding of label and tag stock.
Winders

Rewinder allows nonstop winding of label and tag stock.

With ability to wind rolls up to 10 in. dia on core sizes ranging from 1-3 in. ID, VTR Turret Rewinder operates directly in line with press, providing single pass non-stop finished roll label production. Standard features include automatic core glue, automatic tail glue, doctor blade glue wheels, PLC control, automatic swing back core stop, and it requires no mechanical press connections. Turret...

Read More »
Rewinders

Roll Former winds stretch film material without core.

Eliminating need for cardboard tube core, NO.EL Coreless Rewinder II enables winding of stretch film material into standard-sized roll so stretch film supports roll's structure. System operates offline and delivers standard rolls for automatic and manual wrapping applications. For automatic feeding, internal reel diameter is 3 in., with 3,600-4,800 ft of material supported, while for manual...

Read More »
Multi-Reel Rewinder suits high-speed stamping processes.
Winders

Multi-Reel Rewinder suits high-speed stamping processes.

To maximize unattended winding capacity, automatic Wyndamster 3210 incorporates 10-reel operation with side-by-side reel design. It coils any product strip up to 2.5 in. wide and accommodates reels up to 30 in. in dia. Operating at speeds up to 650 ipm, machine can function in overwind or underwind mode; complete conversion from one direction to other takes less than 1 min. Features include...

Read More »
Oscillating Unwinders/Rewinders accept small coil spools.
Winders

Oscillating Unwinders/Rewinders accept small coil spools.

Traverse wound oscillating unwinders and rewinders accommodate small hole spools by locking them in place via conical seats on twin spindles that engage each side. Coil spools or carriers move sideways in synch with speed so pickoff or deposit point remains horizontally fixed. This results in scan wound or unwound coil without induced camber. Spindles open up to release coil, and units feature...

Read More »
Core Slip Rewinding System provides constant coil tension.
Coilers

Core Slip Rewinding System provides constant coil tension.

Slip Tech system consists of core winding surface made entirely of bearings, which reduce friction between core surface and winding drum. This eliminates excess tension in individual rewound coils during build up, resulting in ability to maintain consistent coil tension because each strip is independently tensioned from core to finished coil OD. Product can also eliminate need for looping pits in...

Read More »
Multi-Reel Rewinder is suited for small floor spaces.
Coilers

Multi-Reel Rewinder is suited for small floor spaces.

Wyndmaster 348 consists of fully automatic, 8-reel take-up that can be used with any product strip up to 3 in. wide and any reel diameter up to 30 in. It uses 4-position horizontal indexer with 2 reels at each position and receives product at speeds to 600 ipm. Features include paper interleaf operation, tangential feeder, and automatic sample strips with programmable length. Changeover is timed...

Read More »
Rewinder is surface-driven.
Rewinders

Rewinder is surface-driven.

Designed to user specifications, Surface Driven Rewinder offers low/high tension flexibility of shaft-driven rewinder, but decreases shaft-related workplace injuries and speeds roll changes. Compact, portable unit includes steel construction and low-tension brake control for gentle handling of material. Options include end-of-roll sensor, 4-station razor-slitting capability, edge trim removal...

Read More »
Rewinders

Dual Spindle Label Rewinder is suited for desktop slitting.

TWIN-CAT-2 Rewinder utilizes 2 powered rewind spindles with Quick-Chuck(TM) Core Chucks to handle multiple rewind cores for slitting or to rewind finished label and waste matrix rolls for die-cut label matrix stripping operations. Product offers heavy-duty, steel construction and allows users to remove waste matrix from die-cut labels as they rewind from printer.

Read More »

All Topics