Wirewound Resistors are rated from 3-20 W at 70
Ceramic-housed, commercial-grade Series PCB features spade lead, printed circuit board mountable terminations, and is available from 0.1 Ω to 1.25 KΩ with tolerances of 5% and 10%. Resistors are RoHS compliant with lead-free 100% matte tin terminations. Flameproof construction makes units suited for industrial equipment, power supplies, power controls, and motor controllers. Custom windings...Read More »
Non-Inductive Power Resistors offer ratings to 140 W.
MHP and SMHP Series provide complete thermal flow from resistive element to integral metal flange of TO-126/220/263/247 packages, enabling specification for high-wattage power electronics circuits that can experience elevated temperatures during operation. Rated for -55 to +155-Read More »
Current Sense Resistors provide ratings as high as 3 W.
Open-air, through-hole, tight-pitch Series OAR-TP offers flameproof alternative to conventional axial devices and flat chips for current-sense circuits where PC board space is tight. Units are rated for 1 or 3 W at 85-Read More »
SMT Metal Oxide Resistors offer power ratings to 3 W.
SMX Series, suited for higher power circuit designs, is available with resistance values from 3 kÃ-¢ -¦ to 1 MÃ-¢ -¦ in tolerances of -Read More »
Epoxy Crusher Backing Solutions for Construction Aggregate & Ore Mining Applications
This white paper provides a guide to epoxy crusher backing solutions for construction aggregates and ore mining applications.Read More »
Surface-Mount Power Resistor handles up to 12 W at 85
Offered in 5, 10 and 12 W ratings, HPC Series employs thick film chip resistors bonded to flat surface of subminiature aluminum extruded housing. Housing has integral J-lead type pads and is designed so that heat is transferred from initial resistor/aluminum interface to all other parts of aluminum structure. At max power, even though resistive element can be at 150-Read More »
Jumper Resistors offer inductance value less than 0.2 nH.
Available in chip sizes of 1206, 2010, and 2512, cross-over Series LRZ features max resistance of 0.003 Ω and max current up to 20, 30, and 35 A, respectively. Units are constructed using thick copper layer on alumina substrate, with protective overcoat covering jumper element. Compatible with automatic pick and place equipment, devices are available in RoHS compliant versions or may be ordered...Read More »
High Temperature Resistors withstand up to 200
TaNFilm products allow engineers to maintain critical electrical characteristics in high temperature applications. Product line includes PFCD-HT series surface mount voltage dividers in 1206 size package, PFC-HT Series chip resistors in industry standard 0603, 0805 and 1206 chip sizes, and 1900HT and 4700HT high temperature DIP and SIP networks. Devices suit applications where parts are subject...Read More »
Flip-Chip Resistors facilitate visual inspection.
Featuring exposed solder fillet, partial wrap termination resistors deliver frequencies to 40 GHz and ohmic values from 10 Ω to 2 kΩ. Termination is available in Platinum Silver as well as Platinum Silver with solder coating of 62/36/2. Resistors are suited for high frequency radio communications, microwave, and radar applications, as well as medical devices, test instrumentation, and sensors....Read More »
Power Resistors withstand harsh environmental conditions.
Wirewound Series W20 features lead-free, vitreous enamel coating, which seals resistor element in glasslike material, making it impervious to harsh environments. Rated for 3, 5, 7, 10, and 14 W with limiting voltages between 100-750 V, units offer resistance of 0.1 Ω to 100 kΩ with standard tolerances down to +1%. Operating from -55 to +200-Read More »
Thick Film Resistors suit power control applications.
Available in TO220 and TO247 packages, 30, 50, and 100 W Sfernice Resistors use ceramic package design without metal tab for direct-mounting on heatsinks. Resistance values range from 0.010 ohm to 550 kohm for LTO 30 and 50 families and 0.015 ohm to 1 Megohm for LTO 100. Designed for use in pulse-loading applications as snubber or bleeder resistors, devices feature inductance under 0.1 H and...Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.Read More »