Resistors

SMD Chip Resistor Arrays feature dual-value capability.

With ability to hold 2 different resistance values on one chip, MAC series enables designers to put entire voltage divider or other functional network of resistors onto one part. Concave SMD chip arrays can offer any combination of resistance values from 10 W to 1 MW and are available in 8-pin, 4-resistor isolated schematic or 10-pin, 8-resistor bussed schematic. Level of tolerance and TCR...

Read More »
Resistors

SMD Chip Resistor Arrays feature dual-value capability.

With ability to hold 2 different resistance values on one chip, MAC series enables designers to put entire voltage divider or other functional network of resistors onto one part. Concave SMD chip arrays can offer any combination of resistance values from 10 W to 1 MW and are available in 8-pin, 4-resistor isolated schematic or 10-pin, 8-resistor bussed schematic. Level of tolerance and TCR...

Read More »
Variable Resistors

Microchip Technology Announces Volatile Digital Potentiometers with SPI Interface

7- and 8-bit Devices Are Specified Over Extended Temperature Range CHANDLER, Ariz., Nov. 13, 2007 [NASDAQ: MCHP] - Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, today announced the MCP4131/2, MCP4231/2, MCP4151/2 and MCP4251/2 (MCP41/423X and MCP41/425X) digital potentiometers. The volatile, 7- and 8-bit devices have a SPI interface and are specified...

Read More »
Variable Resistors

Microchip Technology Announces Volatile Digital Potentiometers with SPI Interface

7- and 8-bit Devices Are Specified Over Extended Temperature Range CHANDLER, Ariz., Nov. 13, 2007 [NASDAQ: MCHP] - Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, today announced the MCP4131/2, MCP4231/2, MCP4151/2 and MCP4251/2 (MCP41/423X and MCP41/425X) digital potentiometers. The volatile, 7- and 8-bit devices have a SPI interface and are specified...

Read More »
Stackpole Electronics, Inc. Announces the Addition of 30 Watt and 50 Watt Products to the TR Series
Resistors

Stackpole Electronics, Inc. Announces the Addition of 30 Watt and 50 Watt Products to the TR Series

RALEIGH, NC (June 11, 2007) - Stackpole Electronics, Inc. announces the addition of 30W and 50W offerings to their TR series of TO-220 style power film resistors. The TR series was previously offered in 20W and 35W configurations. This style of resistor is normally mounted along with various other power IC's to a heat sink maintained at 25C. It is this technique that allows these relatively small...

Read More »
Stackpole Electronics, Inc. Announces the Addition of 30 Watt and 50 Watt Products to the TR Series
Resistors

Stackpole Electronics, Inc. Announces the Addition of 30 Watt and 50 Watt Products to the TR Series

RALEIGH, NC (June 11, 2007) - Stackpole Electronics, Inc. announces the addition of 30W and 50W offerings to their TR series of TO-220 style power film resistors. The TR series was previously offered in 20W and 35W configurations. This style of resistor is normally mounted along with various other power IC's to a heat sink maintained at 25C. It is this technique that allows these relatively small...

Read More »
Thin Film Resistor Networks are hermetically sealed.
Resistor Networks

Thin Film Resistor Networks are hermetically sealed.

Offered in through hole DIP and surface mount packages, thin film resistor networks feature resistance range from 10 to 1 M, with absolute tolerances to less than 0.05% and ratio tolerance to less than 0.01%. TCRs are less than 25 ppm/XC with TCR tracking to less than 5 ppm/XC. Available with hot solder dip, tin-lead plate, and gold plate finishes, units meet MIL-STD-883, MIL-STD-1835,...

Read More »
Thin Film Resistor Networks are hermetically sealed.
Resistor Networks

Thin Film Resistor Networks are hermetically sealed.

Offered in through hole DIP and surface mount packages, thin film resistor networks feature resistance range from 10 to 1 M, with absolute tolerances to less than 0.05% and ratio tolerance to less than 0.01%. TCRs are less than 25 ppm/XC with TCR tracking to less than 5 ppm/XC. Available with hot solder dip, tin-lead plate, and gold plate finishes, units meet MIL-STD-883, MIL-STD-1835,...

Read More »
Resistors

Rejustor Chip corrects offset for Wheatstone bridge sensors.

Single Passive Chip is Ideal Signal Calibration and Temperature Compensation Solution Corrects Offset for Wheatstone Bridge Sensor Applications MEMS EXECUTIVE CONGRESS, Del Mar, Calif., - November 5, 2007 - The leader in innovative analog calibration technology, Microbridge Technologies, Inc. today introduced the MBW-303 Wheatstone Bridge Offset Conditioning Network in conjunction with the MEMs...

Read More »
Resistors

Rejustor Chip corrects offset for Wheatstone bridge sensors.

Single Passive Chip is Ideal Signal Calibration and Temperature Compensation Solution Corrects Offset for Wheatstone Bridge Sensor Applications MEMS EXECUTIVE CONGRESS, Del Mar, Calif., - November 5, 2007 - The leader in innovative analog calibration technology, Microbridge Technologies, Inc. today introduced the MBW-303 Wheatstone Bridge Offset Conditioning Network in conjunction with the MEMs...

Read More »

All Topics