Removers

Oil Skimmer allows flexible removal of coolant contaminates.
Removers

Oil Skimmer allows flexible removal of coolant contaminates.

With adjustable motor speeds from 4-45 rpm, Oil Skimmer typically removes about 2.5 quarts of oil per hr from coolant. Skimmer fits into 55 gal drum and can be used with different belt and bar kits. Designed for easy assembly and relocation, it can also be permanently attached to machines. Unit includes 110 Vac wall adapter and 12 Vdc enclosed motor, sealed to prevent damage from splashed liquids.

Read More »
Moyno® 2000 HS System Features Twin Screw Feeder for 100% Pump Cavity Fill Rate
Screw Pumps

Moyno® 2000 HS System Features Twin Screw Feeder for 100% Pump Cavity Fill Rate

Springfield, Ohio - The Moyno® 2000 HS System is a cost-effective alternative to expensive, high-maintenance piston pumps, conveyors and competitive progressing cavity pumps for dewatered sludge transfer in municipal and industrial wastewater treatment. It includes a twin screw feeder, a key feature enabling the system to handle semi-dry, high solids content material. Moyno will showcase...

Read More »
Snow Plow suits high country applications.
Removers

Snow Plow suits high country applications.

Featuring 5 x 5 x 3/8 in. tubular reversing table, Tube Table Snowplow has 6-spring tripping mechanism that allows moldboard to pass over roadway obstacles and automatically reset to plowing position. Shock absorbing rubber block limits trip travel for overall safety of operator and equipment.

Read More »
Solvents

Solder Paste & Flux Remover from JNJ Industries Now Certified Clean Air Solvent by SCAQMD

Franklin, Massachusetts, USA - JNJ Industries' AquaSonic AQP Solder Paste & Flux Remover has been certified by the South Coast Air Quality Management District (SCAQMD) as a Clean Air Solvent, meeting their new, more stringent requirements of 25 grams per liter or less of VOC. AquaSonic AQP removes solder paste and flux from stencils, printed circuit boards, tools, and other surfaces quickly,...

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
Solvents

Rust Remover is environmentally friendly.

Evapo-Rust(TM) water-based rust remover that eliminates flash rust in 10 min and deep rust in hours. Neutral pH eliminates need to use acids and caustics. One gallon removes rust from up to 300 lb, or approximately 20 sq ft of moderately rusted steel. It does not harm copper, brass, aluminum, plastic, rubber, or vinyl. No special equipment or protective clothing is required and solution is...

Read More »
Oil Split Cleaner removes difficult-to-emulsify oils.
Parts Washing Equipment

Oil Split Cleaner removes difficult-to-emulsify oils.

Safe Scrub® OS lifts oil from iron and steel parts and then floats oil residue to liquid surface for removal from tank by oil skimmer or coalescing filter. Used as stand-alone cleaner or pre-cleaner, product is effective on mineral oil grinding coolants, drawing and stamping lubes, and hydraulic oils as well as water soluble/synthetic fluids and surface soils. Normal cleaning cycle calls...

Read More »
Sludge Removal System suits paint spray booth applications.
Waste Disposal Equipment

Sludge Removal System suits paint spray booth applications.

Maintenance-free Mass Flow(TM) System removes spent residue, paint, or pigment and recycles 60-80% of water back into system, keeping it clean for prolonged periods without sludge buildup. It provides close, constant monitoring and control of water level in recovery tank. With optimum water level and proper chemicals for coagulation, spent residue or paint flotation is maintained and water flow...

Read More »
Tablets help eliminate traces of oil in tanks.
Removers

Tablets help eliminate traces of oil in tanks.

Working through biotechnology process, PetroPucks(TM) attack fluid and consume remaining oil left in tanks after skimming. Single puck treats 1,000 gal of fluid, and in many cases, can bring oil down to levels deemed acceptable for discharge. When added to tanks along with teaspoon of nutrient, pucks provide time release, non-toxic bacteria that breaks down and consumes oil, leaving no hazardous...

Read More »
Label Matrix Removal System features automated operation.
Material Handling Equipment

Label Matrix Removal System features automated operation.

TrimPAC PSA captures, cuts, and evacuates sticky label matrix, trim, offcuts, and other waste for recycling or disposal. To prevent adhesives from clogging system, product is coated with proprietary material that ensures matrix is cut and evacuated without sticking to components. It accommodates matrix widths up to 22 in. and is pre-engineered with in-line cutter, material handling fan, piping,...

Read More »
Cleaner removes urine stains and odor.
Removers

Cleaner removes urine stains and odor.

Urine-Off uses combination of enzymes to remove non-soluble salt crystals contained in uric acid, which produces odor, as well as urea and urochrome which cause stains. Formula leaves citrus fragrance without harming fabric, floor covering, or other surfaces. Urine-Off is non-toxic, non-pathogenic, and biodegradable for safe use in any environment. It works on any type of urine stain, even those...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers