Pressure Relief Valve offers thermoplastic construction.
Designed with PTFE bellows stem seal, Type E Pressure Relief Valve is available with PVC, PP, PVDF, or PTFE body materials and EPDM, FKM, or PTFE encapsulated FKM o-ring seals. Valve, available in -½-4 in. sizes, has no metal-to-media contact and is corrosion-resistant. Drilled to ANSI B16.5 bolt pattern, product can be installed in thermoplastic piping and metal pipelines. It is suited for use...
Read More »
Pressure Relief System suits hygienic applications.
Designed for use in aseptic and hygienic process conditions, Hygienic Opti-Gard features non-fragmenting, reverse-acting rupture disc with smooth, uninterrupted surface finish. It fits directly between ISO2852 standard food industry couplings and clamp fittings. With performance tolerance of 5% across burst pressure range and 95% operating ratio, product is supplied with Integral Flo-Tel...
Read More »
Safety Relief Valve provides tight shutoff.
Built with all stainless steel internals, Figure 800 offers corrosion resistance, metal seat, and choice of 3 different soft seat options. Valve meets ASME Section VIII for liquid, steam, air, and gas services and features quick opening and short reclosing pressures. With fixed ring design, valve is available for pressures to 900 psig and temperatures to 422-
Read More »
Valves offer chemical compatibility.
C Series Valves are constructed of Hastelloy-® C or 316 L stainless steel to provide repeatable pressure regulation or relief of corrosive solutions. They feature smooth, chatter-free bypass and minimal pressure surge. Valves have no external springs or moving parts, and can be used with any positive displacement pump.
Read More »
Customized Silicone Technology: For Today's and Next Generation Electronic Applications
This white paper provides and in-depth overview into the customized silicone technology for electronic protection.
Read More »
Bypass Relief Valves feature Teflon® construction.
Series RVT angle pattern relief valves have Teflon-® shaft and body for use with corrosive and ultra-pure liquids, and for elimination of sticking and surging. Pipe sizes range from 1/4 to 2 in. with various seal materials including Buna-N, Viton, and EPDM. Flow rates range from 2 gpm, and set pressures range from 5 to 150 psi. Valves relieve excess pressure in piping systems, as well as prevent...
Read More »
Relief Valve works for wide pressure range.
Series 1400 fixed-blowdown safety relief valve can be used on gas compressors, separators, heater treaters, scrubbers, dehydrators, gas production units, and transmission and gathering lines in high-flow air, gas, and liquid service. It is available in flanged and threaded configurations, with inlet sizes from 1/2 to 2 in., and orifice areas of 0.059 to 0.830 sq in. It offers set pressures from 5...
Read More »
Relief Valves are designed for gas or liquid applications.
High pressure relief valves protect systems or devices from over-pressure damage and failure. They are available in pressures from 1,000 to 10,000 psi, and feature stainless steel body, nylon seat and PTFE/EPDM seals. Inlet or thru ports and outlet/vent sizes are 1/4 in. FNPT. Valves have 0.70 in. dia orifice and Cv of 0.12. They are externally adjustable and can be mounted in line.
Read More »
Relief Valves have relief ranges from 0 to 100 PSIG.
P-Series Diaphragm-type Relief Valves are available in 2 models that offer push-pull locking knob. P130 has lightweight aluminum body and 1/4 in. male pipe threads. P134 has brass body, captured exhaust, and is of inline-type with 3 inlet ports (two 1/8 in. and one 1/4 in. female pipe threads) and one outlet port (1/4 in. female pipe threads). Valves are rated for 300 PSIG maximum inlet pressure...
Read More »
Relief Valve is suitable for cryogenic service.
RSL Safety Relief Valve features Teflon-® seat, bronze body and stainless steel spring. It is 02 cleaned for oxygen service in compliance with CGA specification G-4.1. Valve is available in sizes 1/2 to 2 in. and is suitable for pressures to 300 psig and temperatures from cryogenic to 300-
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
