Release Agents

Release Agents

Coatings aid in mold release processes.

Mold Release Coatings 6944, 7123, and 7153 provide clean mold release for composite friction materials such as automobile and truck brake composite products. Coatings are non-silicone, water based, dilutable concentrates available in 55 gal drums and 275 gal totes.

Read More »
Release Agents

Coating lets molders choose necessary level of release.

Flex-Z family lets molders incrementally adjust level of release needed for specific parts and processes. HAP-free Coatings, from 1.0-6.0, provide level of release performance desired, enabling molders to switch between levels of product for different molds or apply simultaneous levels of product to one mold. Formula eliminates streaking across full range of application techniques. It suits open...

Read More »
Release Agents

Mold Release Agent works with polyurethane substrates.

Water-based Frekote® Aqualine® PUR-100 is suited for releasing rigid, high-density polyurethane foam and cast polyurethane parts. It delivers multiple releases from one application and can also release some low-density polyurethane foams. Non-toxic, non-flammable coating is freeze/thaw stable and formulated with very low levels of VOCs. Mold release agent does not settle and requires...

Read More »
Release Agents

Release Agent is suited for flange sealing.

Frekote® EFR, formulated to seal porous flange surfaces on composite molds, provides multiple releases per application. Semi-permanent, polymeric release agent is also suited for abrasive processes such as polymer concrete molding. High slip coating is capable of releasing highly filled and abrasive compounds and may be applied at temperatures ranging from 55 to 110°F.

Read More »
Aerosols provide mold release and lubrication.
Release Agents

Aerosols provide mold release and lubrication.

Economy Silicone-55L Mold Release contains 5% silicone concentration. It does not contain CFC's, HCFC's, Class 1 or Class 2 substances and can be used for food-packaging applications. Heat-resistant Die Makers Lubricant-L, with Teflon®, is blended to not dry and to minimize bleeding out with ejector pins, knockouts, slides, cams, and all moving parts. Teflon® additive minimizes...

Read More »
Mold Release/Conditioner has zero VOC content.
Release Agents

Mold Release/Conditioner has zero VOC content.

Non-carcinogenic, odorless SafeSlick(TM) blended boron compound is non-toxic and non-flammable and complies with SPI's environmental, health, and safety policy. Used as release agent in high-temperature/pressure applications, it is non-silicone, non-oil, non-conductive, and non-reactive. Product can applied via spray system, brush, wipe, or sponge, drying to 2-10 micron, semi-permanent layer. As...

Read More »
Release Agents

Mold Release Coating is offered in aerosolized formulation.

Frekote® S-50, water-based, non-flammable mold release coating, suits silicone rubber molding applications. Requiring no cure time at elevated temperatures, coating can be used in mold temperatures from 220 to 390 °F, at which molding commences as soon as water carrier evaporates. When applied to preheated surfaces, product forms thin, inert, thermally stable coating that releases...

Read More »
Release Agents

Mold Release Coating suits rotationally molded resins.

Frekote® Aqualine Rotolease(TM) water-based, non-flammable release agent is designed to provide multiple releases per application with no contaminating transfer. It can be applied to molds at any temperature between room temperature and 205°C. Release agent chemically bonds to mold surface to form micro-thin, chemically resistant coating. Rotolease contains no CFCs and no chlorinated,...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers