Release Agents

Release Agent targets heat-cured silicone rubber applications.
Release Agents

Release Agent targets heat-cured silicone rubber applications.

Designed for use in heat-cured silicone rubber applications and developed specifically for engine gaskets, Release Coating 7880 offers release properties that prevent tearing of silicone rubber during demolding. Water-based solution also prevents surface flaws, such as knit line defects, and can be used at mold temperatures from 320 to 380°F. It works equally with single or multiple mold...

Read More »
Release Agents

Polylactic Acid Additives target for food and beverage packaging.

Designed to optimize physical properties and aesthetics of polylactic acid, SoluPLAs(TM) line of additive concentrates and masterbatches enable PLA to be considered for broad range of applications, including food and beverage packaging. Additive solutions, comprising impact modifiers, mold release agents, UV absorbers, anti-static agents, and toners, optimize impact resistance and clarity....

Read More »
Urethane Roller Mold Release
Release Agents

Urethane Roller Mold Release

Frekote Exitt is a silicone-based, sacrificial mold release developed specifically for urethane elastomer systems. It gives a high gloss finish with a precise retention of the mold detail with no build-up. This product will also release urethane foams, organic rubber compounds, and most specialty molding resins but is not recommended where parts are to be painted, bonded, or stained. Ideally...

Read More »
Release Agents

Bluestar Silicones Announces the Commercialization of its Lyndcoat® BR 2511 RTU in Asia Pacific, South Africa, North America and Latin America

LYON, France, -- Based on its success in the EMEA zone, Bluestar Silicones, a global integrated silicones producer and supplier of silicone based bladder release agents and mould release agents to the tire industry will commercialize its Lyndcoat® BR 2511 RTU in Asia Pacific , South Africa, North America and Latin America as of October 2010. Lyndcoat® BR 2511 RTU is a very versatile...

Read More »
Release Agents

Walco Materials Group Now Offers Innovative Chem-Trend Thermoplastics Premier Mold Release Agents, Cleaners, and Lubricants in the USA

Customers in the USA can now benefit from innovative Chem-Trend Thermoplastics and Rotational Molding product range offered by Walco Materials Group. Walco is among the few authorized distributors of Chem-Trend Thermoplastics and currently the only authorized distributor for Rotational Mold Release. San Diego, CA -- Walco Materials Group, a leading supplier of materials for Electronic, Mold...

Read More »
Water-Based Mold Sealer enhances mold release capacity.
Release Agents

Water-Based Mold Sealer enhances mold release capacity.

Formulated to increase mold release capacity, Frekote® Aqualine® RS-100(TM) is liquid sealer designed to seal micro-porosity in steel and chrome-plated molds. Applied at temperatures between 199-401°F, it is able to withstand temperatures up to 698°F and cures in 15-20 min. Product is available in 1 and 5 gal containers and is applied through low-pressure spray system.

Read More »
Mold Release Agent targets urethane applications.
Release Agents

Mold Release Agent targets urethane applications.

Formulated for elastomeric RIM and structural rigid polyurethane foam applications, Release Coating 7799 features flash point of 142°F, minimizing fire hazards that can occur with lower flash point release. Product provides 2-4 releases on structural rigid polyurethane foam applications and features low solids output of 25-40 g/min to maximize parts molded per gallon. Agent may also be...

Read More »
Mold Release Agent effectively releases intricate rubber products.
Release Agents

Mold Release Agent effectively releases intricate rubber products.

Semi-permanent release agent Type EZR 346 is suited for rubber gaskets, seals, bushings, grommets, and other types of molded rubber products. It allows multiple releases to be achieved and can support production cycle of up to 4 hr. Effective at molding temperatures from 350-400°F, agent allows intricate shapes to be released without pulling and tearing. Water based and environmentally...

Read More »
Mold Release Agent is formulated for brake pad manufacturing.
Release Agents

Mold Release Agent is formulated for brake pad manufacturing.

Release Coating 7776, formulated for molding friction materials, is water-based agent that protects mold from penetration by abrasive friction materials used in molding process. It can be diluted at ratio of 1 part concentrate to 15 parts water. Withstanding 350°F and higher mold temperatures, it provides smooth, defect-free parts when applied using automated spray systems. Product is...

Read More »
Mold Release Agent prevents in-mold gloss build-up.
Release Agents

Mold Release Agent prevents in-mold gloss build-up.

Release Coating 7772 is water-based release agent that prevents mold build-up from triggering increase of gloss in within-mold painted polyurethane systems. Agent provides smooth, defect-free parts and allows gloss quality to be maintained with less frequent cleaning. Painted parts have consistent, defect-free appearance with dry, nontacky feel, and are resistant to scuff and mar. Typical...

Read More »

All Topics