Release Agents

Heavy Duty Paste Wax suits polyurethane molded applications.
Release Agents

Heavy Duty Paste Wax suits polyurethane molded applications.

Maintaining paste-like consistency to accommodate ambient plant temperatures up to 110°F, Release Coating 8012 clings to vertical mold surfaces, vents, pins, and wire locators. Solvent-based product can be applied by brushing or wiping without complicated spray equipment. Available in 10.5 oz cans and 5 gallon containers, coating is suited for flexible, integral skin, semi-rigid, and rigid...

Read More »
Release Agents

Mold Release Coating suits 105-135°F processes.

Formulated for molders of automotive armrests and headrests, Release Coating 7979 provides clean molds with minimal build up, extending time molds remain in production. Blend of hydrocarbon solvents dries quickly on mold surface, saving time for manufacturers with fast process conditions. Release Coating 7979 is available in 55 gallon drums and 345 gallon returnable stainless steel totes.

Read More »
Mold Release Agent suits flexible foam applications.
Release Agents

Mold Release Agent suits flexible foam applications.

With special blend of hydrocarbon naphtha, Release Coating 7972 delivers effective evaporation in molding conditions with short process times before foam pour. Solvent-based release agent provides optimized surface appearance and release with minimal build up. Available in 5 gallon containers and 55 gallon drums, product is suited for automotive headrests, armrests, and other flexible foam...

Read More »
Water-Based Mold Release Agent leaves minimal build up.
Release Agents

Water-Based Mold Release Agent leaves minimal build up.

Release Coating 7882, formulated for MDI seating foam, is suited for flexible foam applications, such as tractor and off-road vehicle seating. Degree of build up left behind extends time between mold cleanings and promotes time molds remain in production. Also, residue does not require extra strength cleaning methods for removal. Also, degree of slip and ease of release from mold cavities reduce...

Read More »
Concrete Release Agent eliminates color imperfections.
Release Agents

Concrete Release Agent eliminates color imperfections.

Formulated for use on latex and urethane elastomer mold materials, Release Coating 7958 includes additives that prevent mold staining and fouling when used in conjunction with powdered colorants. Coating also provides good slip and facilitates release from forms. Combined with minimal build up, product extends time forms remain in production before cleaning or replacement. Release Coating 7958 is...

Read More »
Mold Release Agent is designed for friction composite materials.
Release Agents

Mold Release Agent is designed for friction composite materials.

Release Coating 7962 protects mold surfaces by forming barrier between mold and composite mixture used in manufacturing process for friction materials such as brake pads, clutch facings, gear tooth facings, and rigid molded blocks. Designed for use from 200 to 450°F, water-based release agent can be used with automated spray systems and has pH value that promotes safety, reduces health...

Read More »
Anti-Stick Release Agents suit laminating and bonding processes.
Release Agents

Anti-Stick Release Agents suit laminating and bonding processes.

Preventing contamination buildup and sticking problems, Smooth Fuse SF12 and SF8 formulations are non-staining, solvent-free chemicals that act as both curative cleaners and continuous production lubricants. Products address adhesive sticking and residue contamination problems associated with flat conveyor laminating and other heat-activated adhesive bonding systems. Also, SF8 is suitable for use...

Read More »
Mold Release Coating enables 300+ molding cycles before cleaning.
Release Agents

Mold Release Coating enables 300+ molding cycles before cleaning.

Intended for polyurethane molded products using in-mold paint, Release Coating 7840 provides blend of wax and silicone that minimizes buildup. With proper mold care, aluminum molds can realize 300+ molding cycles before thorough cleaning is required. Water-based release agent is formulated to promote easy release and consistent, unblemished parts at mold temperatures from 110 to 145°F....

Read More »
Mold Release Agent enables multiple release of panel filters.
Release Agents

Mold Release Agent enables multiple release of panel filters.

Designed for OEM and aftermarket filters, Release Coating 7833 is formulated to give multiple release from aluminum molds in flexible integral skin applications. Product not only preserves bond between polyurethane seal and paper component of filter, but also provides aesthetic appearance. Slip and ease of release minimizes effort in manual demolding.

Read More »
Release Agents

All-Purpose Release Agent offers multifunctional flexibility.

Used for release of rubber and plastic parts, water-based MAC-678 is supplied as concentrate that can be diluted with normal plant water. Product can be applied highly diluted as touch-up spray or lightly diluted as semi-permanent release coating. Durable release film bonds to applied surface, allowing for multiple release cycles with no transfer to molded part. Able to work with various parts...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics