Overload Relays have ranges from 0.1 to 630 Amp.

Overload Relays have ranges from 0.1 to 630 Amp.

Solid-state Sirius 3RB10 relays are self-powered with integrated current transformers. They are available in class 10 or 20 trip class with manual/automatic reset or manual reset only. Relays have 4:1 ratio on current setting, enabling one device to cover wide range of currents. They also include phase-loss protection, tripping within 3 seconds upon detection of phase loss. There is no power loss...

Read More »
Reed Relay has >10E+14 ohms insulation resistance.

Reed Relay has >10E+14 ohms insulation resistance.

Low-profile CR-Series leadless 50 Ohm reed relay switches at speeds up to 6 GHz with less than 40 ps rise times. To eliminate potential packaging stress, it is made with ceramic case that matches thermal coefficient of expansion of reed switch glass and reed lead. Capable of withstanding reflow soldering operations up to 260 deg C, it uses no internal solder, and has 1 microV typical thermal...

Read More »
Tagging Relays operate circuit breakers remotely.

Tagging Relays operate circuit breakers remotely.

Series 24 and 31 for automated power distribution systems are available with 2 or 3 positions, and have orange hot-line safety tags. Relays may be operated manually, electrically, or remotely. Two-position models offer Normal and Tagged positions, while three-position models have Closed, Open, or Tagged positions. All allow bi-directional operation and have 2 N/O and 2 N/C contacts per deck....

Read More »
Relays come with compatible sockets.

Relays come with compatible sockets.

Electromechanical Relays and Sockets are available for automotive, appliance, copier, fax, office machine, HVAC, light duty and general purpose applications. Line has relays with different switching characteristics and ratings, along with socket combinations, for variety of applications, including several terminal, wiring, and PCB, mounting options.

Read More »
General Purpose Relay switches loads up to 15 amps.

General Purpose Relay switches loads up to 15 amps.

Series OEG PCLH-2 is available with plug-in terminals for socket mounting and printed-circuit terminals for board mounting. Silver-alloy contacts are double-pole, double-throw form C, and are rated 15 A @ 120 Vac resistive and 10 A @ 250 Vac or 30 Vdc. AC coils are available from 6 to 240 V and DC coils from 6 to 110 V. Enclosed relay is suitable for electrical panels, factory automation...

Read More »
Contactors and Relays handle up to 630 A.

Contactors and Relays handle up to 630 A.

Large frame Sirius 3R contactors and overload relays for motor controls are available in 3 sizes rated from 115 to 500A. Contactors have easy access ac/dc coil system with universal current coil rated for both ac and dc voltages. Only 13 different coil ranges cover control voltages from 24 to 600V ac and dc. Overload relays are rated from 50 to 630 A full load and are available in starter or...

Read More »
Time Delay Relay mounts in panel or socket.

Time Delay Relay mounts in panel or socket.

AGASTAT 48K series has 8 timing modes including on delay, off delay, interval, one shot, repeat, cycle on/off delay, on/interval and accumulating on. It can time periods from 0.1 sec up to 10 hr. Rotary selector switch sets timing range, while adjustment knob provides fine-tuning. Repeat accuracy is 0.5% or Â-

Read More »
Relay Monitor indicates alarm conditions.

Relay Monitor indicates alarm conditions.

Solid State Relay Monitor signals loss of ac or dc line current, open load, short circuit, and loss of dc power. It fits between connection terminals and finger-safe cover of standard solid state relay. Monitor shows green LED to indicate normal operation and normally closed dry relay contact opens on alarm. Four models are available to handle voltages ranging from 100-660 Vac, while four others...

Read More »
Time Delay Relay has eight selectable functions.

Time Delay Relay has eight selectable functions.

Time Ranger III digital-set time delay relay features programmable timing range of 0.1 sec to 9,990 hr, and universal ac/dc input voltage up to 240V. Push button thumb wheels and LCD allow for easy and accurate setting of function and time delay. Unit is available with choice of mounting configurations including panel, DIN rail or surface.

Read More »
Tiny Relay switches up to 20 A.

Tiny Relay switches up to 20 A.

Subminiature AZ9471 PCB power relay has footprint of only 0.295 sq in., yet it can switch 20 A motor, carry up to 35 A for 2 min, and withstand inrush of 40 A. With silver tin oxide contacts, it can withstand inrush of 60 A. Coil voltages range from 6 to 24 V, and power consumption is 0.6 W. Relay is epoxy sealed for automatic wave soldering.

Read More »

All Topics