Electrical Regulators

Dual Buck Regulator features 150 mA on-chip LDO.

Measuring 2 x 2 x 0.6 mm, dual 600 mA Model ADP5022 is suited for space-constrained portable electronics. Unit features 24 Â-µA quiescent current per channel, PSRR of 60 dB up to 10 kHz, and 65 µVrms output noise at VOUT3 = 3.3 V. Included 3 MHz regulators provide fixed-voltage outputs and internal compensation, while eliminating up to 12 discrete components from system board design....

Read More »
Synchronous DC-DC Regulator delivers up to 3 A.
Electrical Regulators

Synchronous DC-DC Regulator delivers up to 3 A.

Housed in 3 x 3 mm, 16-pin TQFN package, MAX15041 features built-in MOSFETs that offer 93% efficiency while minimizing EMI. Device operates from fixed 350 kHz PMW frequency and utilizes peak-current-mode architecture to simplify compensation. Operating from 4.5-28 V input voltage, regulator provides ±1% output-voltage accuracy over temperature range of -40 to +85°C. It includes enable...

Read More »
High-Speed Low Drop Out Regulator is optimized for variable load currents.
Electrical Regulators

High-Speed Low Drop Out Regulator is optimized for variable load currents.

Suited for all battery operated portable equipment, AS1367 Eco LDO delivers up to 150 mA at its regulated output. It offers low power consumption by automatically switching between light and heavy load mode depending upon output current level, while included bypass pin ensures low noise operation. Available in 8-pin TDFN 2 x 2 package, LDO features integrated short-circuit and over current...

Read More »
Triple LDO is optimized for noise sensitive distributed power.
Electrical Regulators

Triple LDO is optimized for noise sensitive distributed power.

AS1355 delivers up to 300 mA at its regulated outputs and offers low-noise performance, allowing direct connection of noise sensitive circuits without additional filtering networks. Stability is provided by ceramic output capacitors of only 1 Â-µF, and ESR of capacitors ensures low output impedance at high frequencies. AS1355 triple linear regulator is available in 16-pin QFN 3 X 3 package.

Read More »
Plastic Knobs
Sponsored

Plastic Knobs

Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.

Read More »
Material Regulator controls adhesives, sealants, and lubricants.
Pressure Regulators

Material Regulator controls adhesives, sealants, and lubricants.

Featuring stainless steel construction of all wetted parts, pressure control Material Regulator is designed to regulate flow of any pumpable material, including epoxy, polyurethane, silicone, grease, adhesives, sealants, acrylics, mastics, and paints. Unit eliminates problem of variable-flow-rate surges generated from transfer pump material supply source. Special internal severe-duty components...

Read More »
Step-Down Switching Regulator withstands 55 V transients.
Electrical Regulators

Step-Down Switching Regulator withstands 55 V transients.

Supplied in 3 x 3 mm package, LT3686 step-down switching regulator operates from 3.6-37 V range and offers programmable switching frequency from 300 kHz to 2.5 MHz. Internal 1.85 A switch delivers up to 1.2 A continuous output current at voltages down to 0.8 V, and overvoltage lockout protects regulator and load from transients. Design ensures constant frequency switching, even in very light load...

Read More »
Electrical Regulators

LDO Regulators require no output capacitor.

Housed in 0.9 x 1.2 x 0.4 mm USPN-4 package, SC6501 Series features input range of 1.4-6.0 V, output voltage range of 1.2-5.0 V in steps of 0.05 V, and max output current of 200 mA. Internal phase compensation enables stable operation even without output capacitor. Suited for cell phones and other information communication devices, regulators include on/off function, current limiter rated at 300...

Read More »
Electrical Regulators

DC/DC Regulator IC comes in small, plastic SMT package.

Capable of operating from 60 V supply without any input protection, LTM8027 integrates inductor, power switches, switching regulator, and all support components in 15 x 15 x 4.32 mm LGA plastic package. It can regulate 2.5-24 V output voltages from 4.5-60 V input supply (65 V absolute max) and deliver 4 A at 12 Vout from 24 Vin with 93% efficiency. Operating frequency, which can be adjusted with...

Read More »
Switching Regulator is designed for SMPS applications.
Electrical Regulators

Switching Regulator is designed for SMPS applications.

Series STR-X6700 is comprised of hybrid integrated circuits (HICs) with built-in power MOSFET and control IC designed for quasi-resonant type switch-mode power supplies. In normal operation, HIC promotes efficiency and minimal EMI noise with bottom-skip quasi-resonant operation during light output loads. Power consumption is also minimized by blocking (intermittent) oscillation during...

Read More »

All Topics