New PMU8000 Series PoL Regulators Meet IEC/EN/UL62368-1 Standard
Features configurable soft start and loop optimization that enables design engineers to optimize load transient response for different capacitive loads. Comes in 7.5 x 7.5 x 5.4 mm package and offer high efficiency of typically 95.3 % which can be used in harsh conditions. Applications include FPGAs, ASICs, network processors, CPUs, GPUs, ICT, industrial, Internet of Things (IoT), railway and...
Read More »
New TPS7A02 Linear Voltage Regulator Comes with Ultra-Low IQ and Fast Transient Response
Equipped in 4-pin small outline no-lead (X2SON) and 5-pin small outline transistor (SOT-23) package measuring 1 mm by 1 mm and 2.9 mm by 1.6 mm respectively. Features 25 nA IQ control at light loads, extended application run times, faster wake-up and can settle in less than 5 us for 1-to-50-mA load transients. Helps engineers design smaller, lighter, more efficient products by reducing...
Read More »
New Low-temperature Option for RHPS Series Regulators Designed to Maintain a Strong Seal in Cold Climates and Applications where Significant Cooling Occurs Due to High Pressure Drop
Have a minimum temperature rating of -49°F (-45°C) for configurations rated up to 1015 psig (70.0 bar), -40°F (-40°C) for configurations rated up to 5800 psig (400 bar) and -4°F (-20°C) for configurations rated above 5800 psig (400 bar). Offers functionality, safety and accuracy when regulators are exposed to extreme temperatures in end-use conditions. Ideal for use even in environments...
Read More »
New BMR469 PoL Regulator is Designed for High-Current ICT Applications
Available in BMR4690000 and BMR4696001 versions with mean time between failures (MTBF) of 18.49 million hours. The BMR4690000 version provides two independent 40 A outputs (dual configuration) and one 80 A output (single-output configuration). Operated with 7.5V to 14V input voltage and delivers an output in 0.6 V to 5 V range.
Read More »
Accelerating Composites Production with Dielectric Cure Monitoring
This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.
Read More »
New TPS7A78 Linear Regulator Delivers up to 0.5 W from AC to DC with Small and Less Components
Switched-capacitor architecture eliminates up to 26 discrete components, including the bridge rectifier. Dynamic active bridge clamp pre-regulates the input voltage for optimal performance to reduce standby power to 10 mW. Optimizes regulation through an active bridge, switch capacitor and integrated low-dropout regulator.
Read More »
New MYMGA1R86RELC2RA DC-DC Converter Features Input Voltage Range of 5.5V-14.4V and Programmable Output of 0.7V-1.8V at up to 6 amps
Peak efficiency exceeds 90 percent for 12V input to 1.8V output. Designed for 2-cell, 3-cell and 12V point-of-load applications where high efficiency, low profile and small solution size are essential. Does not need any additional external components to meet stringent transient requirements.
Read More »
New FAN65005xx Synchronous PWM Buck Regulators are Efficient Synchronous Buck Regulators with Integrated High Side and Low Side Power MOSFETs
Device incorporates a fixed frequency voltage mode PWM controller supporting a wide voltage range from 4.5 V to 65 V. Handles continuous currents up to 8 A. Includes full protection features plus power in a compact 6x6mm PQFN package.
Read More »
ControlAir's New Precision Air Pressure Regulator Provides The Highest Level of Regulation Accuracy and Repeatability
Type 7000 Precision Air Pressure Regulator is available in 1/4", 1/2" or 3/4" NPT porting. Utilizes an isolated control chamber to minimize output variation and vibration/honking during flow conditions. Flow capacity up to 250 scfm (7,075 Nl/min) depending on port size and supply pressure.
Read More »
New Oxygen Pressure Regulator Provides Constant Preset and Tamper-Proof Output, Reducing Dynamic Pressure Waste and Increasing Safety
Features a tamper-proof design and can control nitrogen, argon and other inert gases. Devices are lead-free and made of stainless steel and Grivory. Provides protection for medical applications and can be used in any application that requires sustained control of oxygen.
Read More »
Beswick Offers PRD3 Series Pressure Regulators with Frictionless Pressure Sensing Elements
The Beswick PRD3 Series Pressure Regulator is offered with enhanced regulating valve, 10-32 threaded inlet and outlet ports and an optimized valve to sensing area ratio. The inlet pressure of the regulator is 500 psi rated with outlet pressure ranges of 0 to 5 psi, 0 to 10 psi, 0 to 20 psi, and 0 to 30 psi. The unit’s two-stage design offers stable outlet pressure with swinging inlet/source...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
